Question about Cars & Trucks

Open Question

Fc Holden sill panel fitting diagram

Is there a diagram or plan out there showing correct fitting of sill panels for fc Holden's

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: wire colour coding for radio Holden Nova LF

Car Radio Constant 12v+ Wire: Blue/Yellow
Car Radio Switched 12v+ Wire: Gray
Car Radio Ground Wire: Brown
Car Radio Illumination Wire: Green
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Pink
Left Front Speaker Negative Wire (-): Violet
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Blue
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Black
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Red
Right Rear Speaker Negative Wire (-): White

Posted on Sep 26, 2009

Ad
  • 1 Answer

SOURCE: I have a 2002 4runner with a door lock that does

If anyone is still looking for a replacement door lock motor to solve this issue, they are available here:
http://cgi.ebay.com.au/NEW-Door-Lock-Motor-4-Honda-Lexus-Toyota-etc-/270644032703?pt=AU_Car_Parts_Accessories&hash=item3f03a434bf

Posted on Oct 03, 2010

jturcotte
  • 8269 Answers

SOURCE: I need a vacuum diagram

Hi, the diagram depends a bit on the vehicle it is used in. The diagrams below are for a 1990 Corolla sold in the US. Please let me know the model and year of the vehicle and I will double-check for the correct diagram.

jturcotte_2070.gif

jturcotte_2071.gif

Posted on Aug 12, 2011

  • 8 Answers

SOURCE: Cadillac fleetwood d'elegance fuse panel diagram

Which panel is it you need? under dash, hood, back seat?

Posted on Feb 02, 2012

emissionwiz
  • 76109 Answers

SOURCE: timing belt diagrams 2003 holden 'vectra 3.2ltr

We do not have these diagrams, suggest you buy a service manual, try eBay for a used one.

Posted on Apr 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Tahoe. Where is the auxiliary blower motor located?


It is located behind the right rear quarter panel , In the back right of the interior !
Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side in Interior Trim.
Removal Procedure
  1. Remove the rear seat. Refer to Rear Number 2 Seat Replacement or Rear Number 2 50-50 Seat Replacement in Seats.
  2. Remove the Third Pillar trim panel. Refer to Third Pillar Trim Replacement .
  3. Remove the garnish molding. Refer to Body Rear Corner Garnish Molding Replacement .
  4. Remove the door sill plate. Refer to Liftgate Door Sill Plate Replacement .
  5. Remove the quarter panel trim screws.
A lot involved in this but not to difficult !
  1. Remove the rear door sill trim plate. Refer to Front Side Door Sill Plate Replacement or to Rear Side Door Sill Plate Replacement .
  2. Remove the lower rear seat belt cover and bolt.
  3. Remove the trim panel from the vehicle.
Remove the sill plate. Firmly pull the sill plate up and out from the retainers.
Remove the sill plate from the vehicle. Start from the front of the door sill. Use a flat-bladed tool in order to pry the door sill plate.
Rear Side Door Sill Trim Plate Replacement
Use a flat-bladed tool in order to pry the door sill plate. Remove the sill plate from the vehicle.
Body Rear Corner Garnish Molding Replacement
Remove the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement .
Pull down on the upper corners of the garnish molding in order to disengage the retaining clips. Pull in order to disengage the remaining retaining clips. Remove the rear corner garnish molding from the vehicle. Inspect the rear corner garnish molding for broken or missing retaining clips. Replace the retaining clips as needed.
Good Luck ! Fun job !!!!!

Jun 07, 2015 | 2006 Chevrolet Tahoe

1 Answer

I am looking for a die-cast model larger than scale of 1:43 of a Holden FC Utility (Ute) anywhere in the world please


Look up some of the early year Holden forums on the net that cover the the FE and FCs and others around that era. Join up and ask if someone has one of these FC cast models for sale. You are much more likely to be successful and if not someone may be able to give you a lead to follow up. You will be very lucky to find an FC Ute model though.

Dec 13, 2014 | Holden Cars & Trucks

1 Answer

How do i replace the park assist module in a 2011 chevy traverse???/


Have you checked the fuse? If so, the module is located behind the left rear trim panel. Remove the panel to access. Below is a diagram of the trim panel and location of the module in BLUE>
Preliminary Procedures
  1. Move the rear seat to the full forward position.
  2. Remove the rear number?2 seat . Refer to 3rd Row Seat Removal and Installation.
  3. Remove the rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement.
  4. Disconnect the liftgate actuator rod from the liftgate. Refer to Liftgate Actuator Rod Replacement.
  5. Disconnect the rear seat number 2 shoulder belt anchor bolt. Refer to Rear Seat Number 2 Retractor Side Belt Replacement.
  6. Remove the liftgate door sill plate. Refer to Liftgate Door Sill Plate Replacement.



woauitf41mzpgaaaabjru5erkjggg==

Nov 16, 2014 | 2011 Chevrolet Traverse

1 Answer

Timing belt diagrams 2003 holden 'vectra 3.2ltr


We do not have these diagrams, suggest you buy a service manual, try eBay for a used one.

Apr 30, 2012 | Holden Vectra Cars & Trucks

4 Answers

Fuse diagram for 1998 porsche boxster


HAVE a 1998 PORSCHE BOXSTER I NEED A FUSE PLAN MY RADIO STOPED WORKING N I WANT TO CHECK FUSE

Jan 02, 2010 | 1998 Porsche Boxster

1 Answer

04 Jeep Grand Cherokee Overheating


long answer but should get you solved.

You know for some reason jeep eliminated the FC relay for some models and now relies on the computer to determine when and at what speed the fan should run based on coolant temperature inputs and A/C compressor status. If the fan is not working properly i would consider replacing the fan,
"I have a 04 GC also with the 4.0 and I could not find my FC relay either. Nobody at a local dealer here had ever heard of this phantom FC relay problem. I was able to find an electrical diagram on the web that does not show the FC relay for the 04 GC but that was it. The diagram only showed the PCM and two relays in the PDC near the battery. My GC was overheating now and then. It would seem to overheat when you were in stop and go traffic or letting it idle. I was not losing any coolant so I replaced the thermostat but that did not fix it. After much frustration I started the engine and sat there and watched it run until it began overheating. I paid particular attention to the fan. When the engine began to overheat the fan was barely spinning and would even shut off at times during the overheating. I knew this was not right so that is when I began this search for the FC relay but I could not find it. I disconnected the fan and did some checking on the two speed electric radiator fan. It has a 3 pin connector where the center pin is ground. When I ran power to one pin and grounded the center pin the fan would run. However when I switched the power to the other pin I got nothing. I had already checked operation of the Low and High Speed relays in the PDC near the battery and all checked out so I went and picked up a new radiator fan assembly and installed it. That was yesterday and that fixed the overheating problem. I have concluded that for some reason jeep eliminated the FC relay for some models and now relies on the computer to determine when and at what speed the fan should run based on coolant temperature inputs and A/C compressor status. I also found out that although my GC does not have the towing package it does have the max cooling package. When I went looking for a new motor for the radiator fan at local auto parts store I was asked if it had the towing package and I answered no. Everytime I did they would bring out a motor that only had a 2 pin connector. Not one of them kept the motor that would be needed if you had the towing package. I bet if they did it would have a 3 pin connector on it. So while my GC does not have the towing package I think it has the max cooling package that usually comes with the towing package. I think the standard cooling package uses a one speed fan where the max cooling package uses a two speed fan. It may be that the standard cooling package uses the FC relay which is supposed to be under the passenger headlight but the max cooling package eliminates the relay and uses the PCM to control two relays in the PDC which in turn run the fan. One more thing....replacing the radiator fan assembly involves removing the shroud. One of the 4 screws that holds the shroud is in a very tight space. I fianlly got to it with a long socket extension and swivel. I know this is long but I hope it helps because I was very frustrated at the lack of informartion available locally and on the web in reference to this oddity" (article found on web)

Jun 30, 2009 | 2000 Jeep Grand Cherokee

1 Answer

How to change under-hood fuse in a994 Mercery Villager


you have fuses there and in the van by the drivers side instrument panel.

here's how to change,
Fuse — Main Fuse Junction Panel NOTE: The MAIN and ALT fuses are high ampere cartridges that are held in place by screws, which must be removed in order to replace the cartridge. For removal of the MAIN or ALT fuse, refer to the procedure in this section. Always replace a blown fuse with a new one having the same amperage rating.

Removal
  1. Remove the appropriate fuse panel cover (14A003).
  1. Pull the fuse straight up from the fuse junction panel (14A068). If the fuse is a cartridge-type, carefully pry the clip, then pull the fuse straight up.
I would also check relays, including inhibtor relay. relas have a relese tab.

6764c3e.gif
Item Part Number Description 1 14N089 RAD FAN — LO (Low FC Relay) 2 14N089 RAD FAN — HI 1 (High Fan Control [ FC] Relay) 3 14N089 RAD FAN — HI 2 (High FC Relay) 4 14526 PWR WDW 5 14526 ABS (Anti-Lock Brake System) 6 14526 RAD FAN 7 14526 FRT BLWR (Front Blower Motor) 8 14526 MAIN 9 14526 RR DEF (Rear Defroster) 10 14526 ALT (Generator) 11 14526 IGN SW (Ignition Switch) 12 — Joint Connector 13 14526 H/L RH (RH Headlamp) 14 14526 H/L LH (LH Headlamp) 15 14526 ALT (Generator) 16 14526 ENG CONT (Engine Controls) 17 14526 INJ (Injectors) 18 — SEC (Smart Entry Control) 19 — Hoodlamp 20 14526 ABS (Anti-Lock Brake System) 21 14526 HORN (Horn Speed Control) 22 14526 Fuel Pump (PCM) 23 14N089 ASCD Hold (Speed Control Relay) 24 14N089 Bulb Check 25 14N089 Headlamp, RH 26 14N089 INHIBIT (Throttle Position [TP] Switch) 27 9P704 FUEL PUMP 28 14N089 HORN
check 11, 16, 17, 22, 26, 27

Feb 22, 2009 | 1994 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...