Question about Mercedes-Benz Cars & Trucks

Open Question

2009 benz c300 high mount brake lamp - Mercedes-Benz Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 566 Answers

SOURCE: replace high mount stop lamp

if you read post /reply to same problem by westham oct 1 this may be same solution ?

Posted on Oct 21, 2008

232K7
  • 26 Answers

SOURCE: Hyundai 2006 Sonata high mount brake light.

the rear seat does NOT have to be removed in order to replace the stoplamp and/or its bulb.
you have to get into the trunk, and there are (2) philips screws holding the stoplamp secured to the package tray. the actual process takes about 15 minutes, because to do it right you have to actually get IN the trunk.

the price they charged you sounds about right if the price of the stoplamp is included, dealerships tend to overcharge for parts.

Posted on Apr 14, 2009

  • 31 Answers

SOURCE: The high mount stop lamp not working while two brake lights stay

There will be a switch on the the brake pedal. Gently move it back and forth. If the lights stay on this will have to be replaced. Then replace the third brake light bulb.

Posted on Jul 20, 2009

  • 3 Answers

SOURCE: stop lamps wont work 93 ford explorer

If automatic trans check for broken wire on brakeswitch attached to brake pedal.

Did mine today.

Posted on Jul 25, 2009

  • 233 Answers

SOURCE: 1999 GMC Envoy: replaced both GE 3057 lamps in

The high mount brake light has its own fuse, so check that first. The high mount bulb is generally a stabdard type (there may be more than one bulb) or you can replace with an LED. As for the left rear bulbs not working when depressing brake pedal, check the bulbs again for any spring that may be broken. If the bulbs are still good, make sure there is sufficient contact with the socket. If still not working, have someone check it out further.

Posted on Feb 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 chevy impala brake light isses switch has been replaced and so have fuses and bulbs still no lights


Do you know how to test using a DVOM - digital volt ohm meter ? Is there B+ voltage going into the brake light switch ? An coming out when the brake pedal is pressed ? What fuse's ? There is only one fuse for the brake lights !
The BRAKE SW fuse in the RH I/P fuse block supplies battery positive voltage to the normally-open stop lamp switch. When you press the brake pedal the switch contacts close and battery positive voltage is supplied to the left and right stop lamp assemblies and to the center high mounted stop lamp (CHMSL). The left and right stop lamp along with the CHMSL are grounded at G302.
Do you know about the right insturment panel fuse box ?
Stop Lamps Inoperative
Step
Action
Yes
No
Schematic Reference: Exterior Lights Schematics
1
Did you perform the Lighting System Diagnostic System Check?
YES - Go to Step 2
NO - Go to Diagnostic System Check - Lighting Systems
2
Press the brake pedal.
Do all of the stop lamps illuminate?
YES - Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
NO - Go to Step 3
3
Are all the stop lamps inoperative?
YES - Go to Step 4
NO - Go to Step 7
4
Inspect the BRK SW fuse.
Is the fuse open?
YES - Go to Step 14
NO - Go to Step 5
5
Disconnect the stop lamp switch.
Using a test lamp connected to ground, probe the battery supply voltage circuit of the stop lamp switch connector.
Does the test lamp illuminate?
YES - Go to Step 6
NO - Go to Step 13
6
Install a fused jumper between the battery supply voltage circuit and the stop lamp switch signal circuit of the stop lamp switch connector.
Do the stop lamps illuminate?
YES - Go to Step 12
NO - Go to Step 17
7
Determine if the center high mounted stop lamp is inoperative or the stop/turn lamps are inoperative.
Are the stop/turn lamps inoperative?
YES - Go to Step 8
NO - Go to Step 9
8
Do the turn lamps operate normally?
YES - Go to Step 17
NO - Go to Turn Signal Lamps and/or Indicators Inoperative
9
Disconnect the center high mounted stop lamp.
Using a test lamp connected to ground, probe the stop lamp switch signal circuit of the center high mounted stop lamp at the harness connector.
Press the brake pedal.
Does the test lamp illuminate?
YES - Go to Step 10
NO - Go to Step 15
10
Using a test lamp, probe between the stop lamp switch signal circuit and the ground circuit of the center high mounted stop lamp with a test lamp.
Press the brake pedal.
Does the test lamp illuminate?
Go to Step 11
Go to Step 16
11
Inspect for poor connections at the harness connector of the center high mounted stop lamp. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 20
Go to Step 19
12
Inspect for poor connections at the harness connector of the stop lamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 20
Go to Step 18
13
Repair a open or high resistance in the battery supply voltage circuit of the stop lamp switch. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 20
--
14
Repair a short to ground in one of the following circuits:
• The battery supply voltage circuit of the stop lamp switch
• The stop lamp switch signal circuit of the stop lamp switch
Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 20
--
15
Repair a open or high resistance in the stop lamp switch signal circuit of the center high mounted stop lamp. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 20
--
16
Repair an open or high resistance in the ground circuit of the center high mounted stop lamp. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 20
--
17
Repair an open or high resistance in the stop lamp switch signal circuit of the stop lamp switch. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 20
--
18
Verify the stop lamp switch adjustment. Refer to Stop Lamp Switch Adjustment . If OK, replace the stop lamp switch. Refer to Stop Lamp Switch Replacement .
Did you complete the repair?
Go to Step 20
--
19
Replace the center high mounted stop lamps. Refer to High Mount Stop Lamp Replacement .
Did you complete the repair?
Go to Step 20
--
20
Operate the system in order to verify the repair.
Did you correct the condition?
System OK
Go to Step 2

Jun 23, 2017 | Cars & Trucks

1 Answer

Mercedes 2009 c300 won't start which fuse


i have mercedes c300 2008 . on my dash default withholding system and d'not start what is the problem with my car

Jan 21, 2013 | 2009 Mercedes-Benz C-Class

1 Answer

Ford Expedition 2001, #rd Brake lamp is not working please help.


At the central junction block, find 20A fuse 13 and check it. This fuse supplies power to the brake pedal position switch and switch output is applied to the three high mount stop lamps. If the regular stop lamps work when the brake pedal is pressed, the switch is OK. All three high mount stop lamps may have burned out

Sep 28, 2012 | 2001 Ford Expedition

1 Answer

Is there a fuse or relay or micro relay for the CHMSL on 98 sts


check the lt blue wire at upper lamp,(under trunk lid trim panel) for 12 volts when brake is applied. if no voltage,check same color wire at brake lamp switch for voltage.(by brake pedal).if no voltage replace stop lamp switch asm. if voltage is detected at rear by lamp then replace CHMSL asm.(center high mount stop lamp). this lamp is made of many LED's,if some work and some don't you will need to replace lamp asm. can be repaired by a trained GM tech, possibly. there is no seperate fuse or relay for this lamp,only a stop lamp fuse.

Nov 12, 2011 | 1998 Cadillac Seville

2 Answers

Where can I find a 2009 Mercedez c300 fuse chart which is missing from my car


Have you tried looking in your Owner's Manual? Many modern vehicles only give fuse numbers on the fuse boxes. The chart to see what these fuses go to are usually in the Owner's Manual.

Please note that there are 2 different models of a 2009 Mercedes C300. There is a C300 4MATIC(204.081) V6-3.0L (272.948), and a C 300 (204.054) V6-3.0L (272.947).

There are also 3 different fuse boxes in your vehicle. It would be helpful to know what it is you are looking for so the fuse location can be looked up.

Please also review this article:
Where's The Fuse?

Sep 18, 2011 | 2009 Mercedes-Benz C-Class

1 Answer

Why does the temperature reach 90 on the dial,whats the normal temp .


  1. The Mercedes-Benz C-Class line of compact vehicles provides the German brand with a price point model for showrooms. The C-Class enjoys the trickle down effect of the innovations launched in more expensive Mercedes models such as the E-Class and the S-Class. The W204-bodied C300 was introduced for the 2008 model year and remains in production with the same specifications as of the 2011 model year.
  2. Drivetrain
  3. The Mercedes-Benz C300 is powered by a naturally aspirated, V6 engine with 3.0 liters of displacement. This motor has a 24-valve double overhead cam (DOHC) design with a 3.46-inch bore, a 3.23-inch stroke and a compression ratio of 11.3:1. Output for this engine is rated at 228 horsepower at 6,000 rpm and 221 pound-feet of torque at 2,700 rpm. Mercedes offers this compact luxury sedan with a choice of a six-speed manual or a seven-speed automatic transmission.
  4. Exterior Dimensions
  5. The C300 sits on a 108.7-inch wheelbase with an overall body length of 182.3 inches and width of 69.7 inches. The C300 Sport model has an overall height of 56.3 inches with a 60.4-inch front track and a 59.6-inch rear track, while the C300 Luxury model is 56.9 inches high with a 60.7-inch front track and a 60.8-inch rear track. Both trim levels of the Mercedes-Benz C300 offer 35.6-foot turning diameters.
  6. Interior Dimensions
  7. The Mercedes-Benz C300's cabin provides 88.2 cubic feet of passenger space with a trunk that offers 12.4 cubic feet of luggage room. Front-seat occupants are provided 37.1 inches of headroom, 41.7 inches of legroom, 54.7 inches of shoulder room and 52.3 inches of hip room. Rear-seat passengers are afforded 36.9 inches of headroom, 33.4 inches of legroom, 55.1 inches of shoulder room and 54.9 inches of hip room.
  8. Safety
  9. The National Highway Traffic Safety Administration (HTSA) frontal impact crash test resulted in four-star ratings (out of a possible five stars) for driver and passenger protection. This vehicle also earned a four-star rating in the NHTSA's rollover test, while the administration's side impact crash test resulted in five-star ratings. The Insurance Institute for Highway Safety (IIHS) frontal offset impact crash test earned the C300 a "Good" overall rating, which is the highest rating given by the IIHS.

Jan 15, 2011 | 1994 Mercedes-Benz C-Class

1 Answer

I have mercedes benz c300 2008 model. "check your brake pad" is showing on my dashboard, while my brake pads are still ok


have emergency pads in rear checked,some cars have seperate pads for emergency.possibly bad sensor or caliper.hope this helps,see if local advance or auto zone can scan for free,or help further.

Dec 24, 2010 | Mercedes-Benz 300-Class Cars & Trucks

1 Answer

1999 GMC Envoy: replaced both GE 3057 lamps in left rear light assembly. Lamps both light. However depressing brake pedal does not initiate brake light. The righ rear brake light does work. The high mount...


The high mount brake light has its own fuse, so check that first. The high mount bulb is generally a stabdard type (there may be more than one bulb) or you can replace with an LED. As for the left rear bulbs not working when depressing brake pedal, check the bulbs again for any spring that may be broken. If the bulbs are still good, make sure there is sufficient contact with the socket. If still not working, have someone check it out further.

Feb 15, 2010 | 1999 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...