Question about 2004 Dodge Durango

Open Question

Odge durango 5.7 engine serpentine belt diagram

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: serpentine belt diagram:

The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.

Posted on Jul 18, 2008

Ad
digritz
  • 530 Answers

SOURCE: I need a serpentine belt diagram for adodge

Here's your belt diagram.
if it's not correct let me know and I'll get you all the routing diagram for that year ram 1500.
Hope it helps.
bfce879.jpg

Posted on Nov 17, 2009

  • 2841 Answers

SOURCE: photo of serpentine belt diagram..

There should be a routing diagram under the hood somewhere. But in case it is missing, here is the routing diagram. Same for all engines that year. 0c36bb4.png

Posted on Jan 10, 2010

  • 1757 Answers

SOURCE: Need serpentine belt routing diagram for 1994 Dodge grand caravan

3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!

Posted on Jan 22, 2010

chuckster57
  • 1102 Answers

SOURCE: this 2008 sprinter has two belts, one for the fan

Here is a picture of the Serpentine belt routing for a 2008 3.0 diesel

chuckster57_51.gif

Posted on Aug 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I just replace the serpentine belt for power window on 2003 dodge durango


Your very confused

The door window & the engines serpentine belt
& whatever motor your taking about-- are two
separate things

Start over

Dec 05, 2012 | 2003 Dodge Durango

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    1 Answer

    How to install serpentine belt


    Below u will find a link to the Dayco belt routing diagram catalog, just look up your model year and engine type and go to the # diagram it shows. Please allow time for the large PDF file to load. thanks

    http://www.daycoproducts.com/daycoweb.nsf/cf652a4feb630ad0862571a4005ae40c/1120b6e8f406fd3e862574c000569a91/$FILE/SerpentineBeltRoutingGuide.pdf

    Oct 27, 2010 | 2002 Dodge Durango

    1 Answer

    Photo of serpentine belt diagram.. for 2002 Dodge Durango.


    There should be a routing diagram under the hood somewhere. But in case it is missing, here is the routing diagram. Same for all engines that year. 0c36bb4.png

    Jan 10, 2010 | 2002 Dodge Durango

    2 Answers

    Need diagram of drive belt assembly forcaddy


    You didn't list your motor size so please pick the applicable diagram:

    ba0b112.gif
    Accessory serpentine belt routing—4.8L, 5.3L & 6.0L engines

    9dcebd3.gif
    Accessory serpentine belt routing—5.7L engines with A/C

    bb89ba7.gif
    Accessory serpentine belt routing—5.7L engines without A/C

    27f4999.gif
    Accessory serpentine belt routing—6.5L Diesel engines

    4d67005.gif
    Accessory serpentine belt routing—7.4L engines

    491a0a4.gif
    Accessory serpentine belt routing—8.1L engines

    Oct 26, 2009 | 2002 Cadillac Escalade Ext

    2 Answers

    Needa serpentine belt routing diagram for a 1990 F150 pickup truck


    1990 Ford F Series Pickup 6-Cyl. 4.9 L
    Automotive V-Ribbed Belt (Standard)
    Serpentine; W/A.C.; W/Auto. Trans

    bbb6423.jpg

    Automotive V-Ribbed Belt (Standard)
    Serpentine; W/A.C.; W/Man. Trans
    7b961e6.jpg


    Automotive V-Ribbed Belt (Standard)
    Serpentine; W/O A.C
    5ad2e3d.jpg


    Is this engine is your model, I hope help you with this. Good luck.

    Sep 11, 2009 | 1990 Ford F150

    1 Answer

    Need a diagram fro putting back on


    there should be a decal near the hood latch or under the front lip of the hood with the belt routing diagram.

    Mar 29, 2009 | 2004 Dodge Durango

    2 Answers

    Serpentine belt diagram for a dodge durango 1999


    hey go here and look at picture 7-20

    http://www.daycoproducts.com/daycoweb.nsf/Serp%20Rout%20Guide%20Illus.pdf

    Jan 07, 2009 | 1997 Dodge Ram 1500 Club Cab

    Not finding what you are looking for?
    2004 Dodge Durango Logo

    Related Topics:

    13 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    76132 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...