Question about Cars & Trucks

Open Question

How to replace barrel lock on driver's door seat toledo

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 10 Answers

SOURCE: Drivers side door lock barrel fell out???

This is a common fault on A4 VAG cars (Mk 4 Golfs, Skoda Octavias, Seat Leon, Beetle, Audi TT , Audi A3) you will need to remove the door card from the inside. Repair kits are available so it may be possible to repair the lock barrel but for the effort htat is required to remove the door card I would replace the lock barrel rather than repair it.

Posted on Aug 16, 2009

Testimonial: "Thanks very much for your help. I'll give it a go but it may end up at the mechanics for them to deal with. : )"

  • 1 Answer

SOURCE: Locking problems seat ibiza 2000 1.4s

How I fixed the central locking seat ibiza 2001

Posted on Oct 03, 2009

SOURCE: There is no power in

Need a Wiring Diagram to even see what
is in those systems

Posted on Aug 06, 2011

johnjohn2
  • 5763 Answers

SOURCE: 92 Honda Accord EX Wagon doors not locking

If it was the actuator in the drivers door the other doors would still lock. this sounds like a bad connection, test the drivers door switch, the other thing is do the doors lock if you use the pass/door switch to lock the doors? if it doesnt then its not the switch but if it does lock the doors then replace driver door lock switch. if the switch on pass door doesnt work to lock then check wiring. look at wiring going into driver door, look at the door, open it, look at door hinge area and in the middle you will see the rubber boot that holds the wiring for that door. remove the boot or rather slide it back and check for any broken wires. its common for wires to break from opening and closing the door. good day.

Posted on Oct 22, 2011

dttech
  • 4803 Answers

SOURCE: how to replace door lock on driver's side of chevy lumina 1993

"door lock" describes many parts of the door assembly. There is door lock cylinder, door lock actuator, door lock rod, door lock switch...WHICH PART of "door lock" are you wanting to replace?

Posted on May 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a 93 MH Barina ignition barrel


take it to the dealer. for the fix or get the FSM on car and read
all the complex steps on doing that. RTM.
1993? no air bags right, (they can be dangerous to any mechanci)
pull the steering wheel off.
then remove the tamper bolts from key lock assembly.
then put in a new lock.
once the keyassemlbe is out , take it to any key/lock shop and
ask him/her to fix it, if they cant, then buy a new one.
if you want to hot wire the car, get the FSM, and use that and its
schematics to see if you can do it, if not. ask a qualified, autoelectric
shop to do it.
if the key switch has locking steering feature, like all here(usa)
do not let it fail, is it might lock while driving. DO NOT LET THAT HAPPEN. Safety first, no>?

Feb 19, 2013 | 1993 Suzuki Swift

2 Answers

I have a 1998 chevy suburban. The dome lights don't work. checked fuse box under hood. All good. Are there other fuses on the truck?


Instrument Panel Fuse Block
The instrument panel fuse block access door is
located on the driver side edge of the instrument panel.

Pull off the cover to access the fuse block.

The vehicle may not use all of the fuses shown.

Fuses Usage
1 Rear Seats
2 Rear Accessory Power Outlet
3 Steering Wheel Controls Back light
4 Driver Door Module
5 Dome Lamps, Driver Side Turn Signal
6 Driver Side Turn Signal, Stop lamp
7 Instrument Panel Back Lighting
8 Passenger Side Turn Signal, Stop lamp
9 Passenger Door Module, Driver Unlock
10 Power Door Lock 2 (Unlock Feature)
11 Power Door Lock 2 (Lock Feature)
12 Stop lamps, Centre High Mounted Stop lamp
13 Rear Climate Controls
14 Power Mirror
15 Body Control Module (BCM)
16 Accessory Power Outlets
17 Interior Lamps
18 Power Door Lock 1 (Unlock Feature)
19 Rear Seat Entertainment
20 Ultrasonic Rear Parking Assist, Power Liftgate
21 Power Door Lock 1 (Lock Feature)
22 Driver Information Centre (DIC)
23 Rear Wiper
24 Cooled Seats
25 Driver Seat Module, Remote Key less Entry System
26 Driver Power Door Lock (Unlock Feature)

Aug 23, 2011 | Chevrolet Suburban 2500 Cars & Trucks

1 Answer

Wife taken clio to work with the spare key (no button), she has tried to lock the car but only the passenger side locks, the drivers side is unlocked, how can she lock the drivers door?


Hi,

As you have not stated the Year of Manufacture, I will provide the following possibilities:

Firstly, your wife must be using a sub-key (if no remote function). So, you need to determine if this was a factory supplied sub-key, or was a re-cut duplicate of the master key.

Secondly, the 'most used' key will usually wear out over time (and the driver's barrel lock will sometimes wear in accordance with the most used key), which would mean only that key will operate that door barrel lock successfully.

If the sub-key has not worn to the same degree, chances are the sub-key may not be able to engage properly when inserted into the driver's door lock.

This is common when using a sub-key - sometimes a sub-key won't start the car, but turning the key upside down will often operate the ignition. The same principle would apply to the driver's door lock also.

The key will often operate the door lock if you only insert it about 95% of the way , or simply turn the key upside down and try again.

If the key refuses to operate the driver's door, the other alternative is to enter via the passenger side and reach over to lock the driver's door from the inside. Then lock the passenger door behind you.

However, this is a major hassle, so I would recommend you obtain a replacement Renault key "FOB" remote (you can get these off Ebay reasonable cheaply - supplied with instructions) and program it to your vehicle yourself. This will enable both of you to have a central locking remote key fob.

Note: the remote fob programming feature will obvioulsly depend on the year of manufacture for your vehicle though.



"If this has helped resolve your issue, please be kind enough to leave a testimonial"

Jun 10, 2011 | Renault R5 Cars & Trucks

1 Answer

Hi guys i own a xregseat toledo 1.9tdi se mk2


either the lock mechanism is broke or the vacumn pipe is broke that lead into the door to operate the lock but this is only on older models .That have a pump in the boot

Dec 04, 2009 | Volkswagen New Passat Cars & Trucks

2 Answers

I have to lock and unlock my peugeot 406 with a locksmiths key and recently it has become a lottery. The lock barrels in both the drivers and front passenger doors often revolve freely in their housing...


the car has dead locks via the central locking, it is very common on this car, take the drivers side door card trim off and look to see if the motors are connected correctly.

hope this helps. most likely you will have to change the drivers side motor.

Nov 12, 2009 | 2005 Peugeot 405

1 Answer

Locking problems seat ibiza 2000 1.4s


How I fixed the central locking seat ibiza 2001

Sep 01, 2009 | 2000 Volkswagen Golf

2 Answers

Mk 4 vw golf gti front door lock problems


Those components are probably part of a new lock assembly. Maybe locate a used lock to take those pieces from.

May 17, 2017 | 2001 Volkswagen GTI

1 Answer

Drivers side door lock barrel fell out???


This is a common fault on A4 VAG cars (Mk 4 Golfs, Skoda Octavias, Seat Leon, Beetle, Audi TT , Audi A3) you will need to remove the door card from the inside. Repair kits are available so it may be possible to repair the lock barrel but for the effort htat is required to remove the door card I would replace the lock barrel rather than repair it.

Aug 16, 2009 | 2001 Volkswagen GTI

2 Answers

Lock barrell on the drivers side is broken


you'll need to remove your door panel (screws are by the door handle, arm rest, under door and side of door) and pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything.

I'm not sure what you mean by lock barrell.. I'm guessing the cylinder which you'll just have to bolt back onto the door.. you may need to find a specific bolt though....

Aug 10, 2009 | 1998 Volkswagen Passat

3 Answers

Lift gate latch of 2003 Ford Escape


I just want to know if there is any manual to disarm the lift gate and check for the problem. Currently my door is lock and cant open, how you force it to open?

Jun 19, 2008 | 2003 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...