2005 Dodge Grand caravan replace oil sending unit

SOURCE: 2005 Dodge Grand Caravan brakes

i dont know if this makes sense, if its the big clip, you push in the cylinder and twist until the clipp comes off

SOURCE: i need to replace a broken wheel stud but could

get a 4lb sledge hammer and wack the outer face of the drum in a criss cross pattern being careful not to hit too hard or hit lug nut studs, use some liquid wrench around the studs before hitting to dislodge rust bond

SOURCE: 2005 dodge grand caravan getting code p0406

3.3 engines has the egr valve with transducer.you have to replace the whole unit. code p0406 what its trying to tell you your egr valve circuit is short to ground.it has failed .

Greg Bernett

• 2993 Answers
• Posted on Jul 12, 2009

SOURCE: What is the sequence for the bolts on oil pan, for

For the 2.8L there is no sequence. Torque for the bolts are 105 in.lbs.

For the 3.0L torque is 50 in.lbs. in sequence:







For the 3.3L and the 3.8L, no sequence but torque each bolt to 105 in.lbs.

Please don't forget to rate!

SOURCE: replacing outter tie rods 2005 grand dodge caravan

Replacing steering components is not that easy, and you have to take it somewhere for an alignment afterwards anyway, and if the shop did not do the work they are going to charge you a lot for the alignment. I'd take it somewhere and let them fix it for you.

I wouldn't take a long trip with bad steering components. If something broke, the best outcome is you'd be stranded, but the worst could be you lose control and crash. Paying somebody to fix it would seem really cheap compared to that!