I have a 2003 Mazda 6. When I put it in reverse the parking sensor starts but is not functioning properly. The volume and length of each beep stays constant regardless of how close I get to something (e.g. a wall).Any advice on what is wrong here or how I cna fix it would be greatly appreciated.Many thanks
SOURCE: parking brake light
The parking brake and the low brake fluid use the same light. If it comes on during acceleration, your brake fluid level is low and you need to add some brake fluid or replace your pads. The brake fluid gets low as the pads wear as the whole system is hydraulic. Another possibility is a brake fluid leak. As you accelerate, the fluid gets pushed back causing the low brake fluid light to turn on.
SOURCE: Mazda B2300 1995 - dashboard & parking lights not working
hi..the reason to this problem may be your
wiring.check the wiring kit properly.This will
solve the isssue.
try this out..
thank u..
rate me..
SOURCE: How does one adjust the parking brake on a mazda miata?
I can't say for sure, but many of them have an adjustment under the center counsel. Your's is a pull one in between your seats, right?
SOURCE: Parking Brake Release Cable has snapped
This should help...http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?categoryDisplayName=Brakes+%26+Traction+Control&fromType=parts&fromString=search&parentId
SOURCE: Mazda 323f sport 1999. How do you adjust parking brake?
Where the handbrake lever is,it will be covered by a boot of some sort.Peel this back and beside the lever will be either a rod with a nut on it,or it will have a recess for a screwdriver.with the h/brake off,do the adjustment by tightening it.When it's right, the h/brake should have to be pulled so 7 'clicks' can be heard.Hope this helps
651 views
Usually answered in minutes!
×