Question about 2002 Saturn L-Series

1 Answer

What type of wrench is needed to remove oil drain plug on 2002 saturn LW300 w/ v6

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 651 Answers

Cresent wrench should work fine.

Posted on Jan 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get oil pan off on a 2000 Saturn LW300 V6 3.0L


The official shop manual reads :
Remove nose cone brackets bolts from oil pan.
Remove lower transmission flange to oil pan bolts.
Remove oil pan bolts.
Using designated pry points to break loose the seal. Bump the pan with a rubber mallet to loosen the pan from the engine block.
Remove oil pan.
By the illustrations, the only thing in the way is the oil pickup tube.... Good luck !
t

Nov 21, 2014 | Saturn Cars & Trucks

1 Answer

How to do an oil change for saturn coupe


Dear Lourdes ,go to parts store and get oil for car , and filter for car and a filter wrench that fits filter, raise car so you can under it ,remove drain plug from oil pan in to a container that can be used for recycling and let oil drain avg10 min or so replace drain plug and tighten , use filter wrench to remove filter (unscrewing it ,not over tightening) it ,take new filter put alight film of oil on rubber seal of filter ,put it back on motor ,(not over tighten or under tightening ), lower car and fill motor with proper type of oil and fill to proper level using dipstick to check level,. start and run motor for a few min. then shut off and wait a few min . for oil to return back into oil pan and recheck oil level to be sure it is at proper level .
ok have FUN . ps for 21.00 take it to pep boys . Woody

Sep 05, 2014 | 2001 Saturn SL

1 Answer

Saturn 2002 LW300 water pump


you have to take belt off need special wrench.

Mar 14, 2013 | Saturn Cars & Trucks

1 Answer

Tools for oil change


You only need a few. You need a wrench or socket that fits the oil pan drain plug. Car makers have used all sizes of drain plugs, don't know Saturn's, anywhere from 13 millimeter to 19 millimeter size wrench or socket. One of them will fit yours.
So one wrench (when you find the right one) and you will need a drain pan to catch the oil. Next you will need an oil filter wrench or tool. There are several types and sizes-when you buy the new oil filter you can get the filter remover that fits your filter . A parts person should be able to help you select the right one. Also buy a small funnel to pour new oil into the engine .And don't forget to have a few rags handy to clean up spills and wipe off areas. That's about all that is normally required.

Dec 21, 2012 | 2004 Saturn ION

1 Answer

2003 Saturn LW300 V6. Could the need for an oil change cause the engine light to come on?


YES CHANGE THE OIL AND FILTER SOON OR YOU MAY HAVE TO CHANGE YOUR ENGINE

Oct 19, 2012 | 2001 Saturn Lw 4dr Wagon

2 Answers

What do i need to chang oil in a 2004 saturn vue


if you have access to a car ramp the oil plug is located on edge of the oil pan and while under your car you will see the oil filter it all depends on what kind of oil you want sometimes it boils down to budget but remember you get what you pay for

Sep 22, 2012 | 2000 Dodge Intrepid

1 Answer

How do i change oil in 2002 saturn sc2


you will need approx. 5 quarts of Oil 10W 30
you will need an oil pan, rags an oil filter wrench(walmart--very cheap). New oil filter obviously. 14mm wrench or socket for the drain plug.

Procedure: let car warm up (this will help drain all oil out faster and more efficiently)

take drain plug out first,
let that drain while you place a little oil in the new filter (if it is a horizontal mounting filter then there is no need to put any in)
use your oil filter puller and take off the old filter. that may have a little residual drainage; after that place the new filter in and then replace the drain plug(once all the oil has stopped running out. a little bit left in there won't hurt) place at least three quarts in to the filler hole. then start the engine for aproxx 30 sec. This will allow the oil to fill the oil filter and also heat it up a bit. let it sit for a minute then check the level. It may take a little over 4 quarts, you will have to check the dip stick as you pour more in. take it for a test drive then park on the level, let it sit for a minute, then check it again. if it is way over then you must drain some back out. over filling can damage your engine.

Jun 25, 2009 | 2002 Saturn Sl

1 Answer

Changing the oil


The drain plug is on the oil pan, bottom of engine. Use an adjustable wrench

May 03, 2009 | 2002 Dodge Stratus

1 Answer

Cannot locate oil drain plug on 2004 Saturn Vue


It is probably a bit different on the 4-cyl engines than the V6 engines. I'll assume you have the V6 for the moment since those seemed to be more popular.

On the 3.5L V6, the drain plug is behind the passenger side wheel well and I believe takes a 17mm socket/wrench to remove.

Dec 30, 2008 | 2005 Saturn VUE

Not finding what you are looking for?
2002 Saturn L-Series Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...