Question about 2003 Hyundai Tucson

Open Question

How to adjust into high the headlight of hyundai terracan

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 840 Answers

SOURCE: Headlight Adjustment

their are either torx screw above or below the headlight back cover one is for up and down and the other for rt and lt

Posted on Jan 25, 2009

Ad
  • 840 Answers

SOURCE: Adjusting the low beam headlight

its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much

Posted on Jan 31, 2009

  • 1 Answer

SOURCE: side light bulb change on hyundai terracan

hi there
the solution is simple,
you only need to undo the screw on top of the side light/indicator. then facing the head light place a flat headed screw driver under the bottom lip of side light. the bottom of the lihgt is on a small push fit stud, use a sponge or cloth to protect your bumper paint work then just apply pressure gently to lever side light out towards you, It will come dont worry, you may then change your bulbs if you wish remove the whole light unit you will see the bottom bolt as soon as you release the side light. to replace just push back into place then replace screw. whole job takes about five minutes

hope this helps kevan hildred

Posted on Jan 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CANNOT FIND HYUNDAI TERRACAN JI GRAY TRIM PAINT DOES IT HAVE ANOTHER CODE


Paint code is on the VIN. Check your engine bay on the firewall there should be a plate there.

You use an online decoder to figure it out

You may find some useful information in a repair manual also:
http://www.papertownspdf.com/downloads/hyundai-terracan-repair-manual-2001-2008/

Jul 29, 2017 | Hyundai Cars & Trucks

1 Answer

We overhauled the engine of a Terracan V6 3.5L engine and now refuse to start. I am not sure about the valve timing and would appreciate help here. There is spark and fuel. Please help urgently


The Internet has a large number of web sites
where you can buy service manuals and schematics
from bookstores, publishers, and other collectors.

http://www.repairservicemanuals.com/Hyundai/Terracan%202.9%20CRDi%20GLS/2009/


Factory Auto manuals
http://www.factoryautomanuals.com/
search for : factory service auto repair manuals

Chilton Repair and Service Manuals
http://www.chilton.cengage.com/

Haynes Repair and Service Manuals
http://www.haynes.com/

Jan 14, 2016 | 2005 Hyundai Terracan 3.5

1 Answer

Hi Im trying to wire a set of spoties into the high beem circuit through a switch in the cabin but it seems to have a neg switch system can you supply a dia to help me . 06 Terracan Highlander Cheers...


You need to tap into the high beam RELAY power. The computer uses a signal to switch on the lights, it sees a signal and tells the relay to come on using a lower voltage or even as you suggested a ground, when the relay closes it sends voltage to the lights.

Oct 20, 2013 | 2005 Hyundai Terracan 2.9

1 Answer

Hyundai terracan blower motor speed control resistor


I am also trying to find out where the blower resistor is on a Hyundai terracan 2006. On here someone says its on the passenger firewall is it beneath the battery I cant find it

Jan 29, 2013 | 2006 Hyundai Terracan 2.9

1 Answer

Headlights of my Hyundai one is down to earth & one is very high


Take it to a licensed headlight adjusting station and have them adjusted.

Jul 12, 2012 | 2001 Hyundai Accent

1 Answer

Diagram for fuse box hyundai terracan highlander 2002 4wd


Check this website, you find there fuse box diagram and description for Hyundai Terracan

Hyundai Terracan 2005 2007 fuse box diagram Auto Genius

May 16, 2011 | Hyundai Santa Fe Cars & Trucks

1 Answer

Adjusting the low beam headlight on a 2003 Hyundai Elantra


thats it my freind one on each side/Plaes rate my response thank you very much

Jan 30, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Adjusting the low beam headlight on a 2003 Hyundai Elantra Adjusting the High beam headlight on a 2003 Hyundai Elantra


its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much

Jan 30, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Adjustment headlights '02 Hyundai Elantra


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Jan 23, 2009 | Hyundai Motor 2002 Elantra

3 Answers

Side light bulb change on hyundai terracan


hi there
the solution is simple,
you only need to undo the screw on top of the side light/indicator. then facing the head light place a flat headed screw driver under the bottom lip of side light. the bottom of the lihgt is on a small push fit stud, use a sponge or cloth to protect your bumper paint work then just apply pressure gently to lever side light out towards you, It will come dont worry, you may then change your bulbs if you wish remove the whole light unit you will see the bottom bolt as soon as you release the side light. to replace just push back into place then replace screw. whole job takes about five minutes

hope this helps kevan hildred

Nov 23, 2008 | 2003 Hyundai Tucson

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...