Question about 1996 Toyota Tacoma

Open Question

How to remove instrument cluster for 1996 Toyota Tacoma

Need to replace the light bulb in the driving spot

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 320 Answers

SOURCE: 2003 Toyota 4runner Instrument Panel bulb replacement

ypu can not buy them any where, i had the same problem.you have to order them from a toyota dealer. they are very inexpensive.. i tried different bulbs radio shack didnt work.

Posted on Jan 12, 2009

Ad
relaga58
  • 158 Answers

SOURCE: instrument lights don't work

check connections

Posted on May 09, 2009

  • 87 Answers

SOURCE: need fuse box diagram for 1996 toyota tacoma

go to local library and look @ hanes manual for free. You can also purchase one at napa or autozone, or buy the toyota shop factory manual for 100 dollars.

Posted on Jun 05, 2009

  • 73 Answers

SOURCE: Need to replace burnt out dash board lights 2001 Toyota Corolla

Just remove the 4 screws and then slowly pull the cluster out and reach behind and disconnect the plugs on the back of the unit and then remove the cluster. The bulbs can be removed by turning them and pulling out.

Posted on Sep 26, 2009

  • 1 Answer

SOURCE: 2003 parking bulb toyota tacoma

OK, I just fixed mine. The unit pulls out. You have to get a screwdiriver, wrap it with a cloth so it doesn't scratch the paint, then gently wedge the entire unit out. When it pops out, you'll see the clips that keep it in place. You might think its breaking when you pull it out, but trust me this is how you do. Just be gentle with it. After you get the unit out, simply take the socket out and replace the bulb. I did it in five minutes.

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pls, I just got a 2000 Toyota sienna Le and I discovered that cluster light is not working, and when the full light is engaged, the car strerio backlight goes off as well. What can I do pls?


If you are meaning that the gauge cluster, IE. Speedometer, Fuel gauge, ect? The instrument gauge cluster needs to be removed and the bulbs replaced. It is not a hard job. Most panels have a plastic "beauty" bezel surrounding the Instrument cluster that MAY or MAY NOT be secured by screws. SOME just snap in place. once you get that off the instrument cluster is held in by usually 4 screws. remove the screws and it comes out. disconnect the wiring plugs, then it can come all the way out. Before you do this go to Toyota And get the bulbs. You can get them at auto parts stores too but Toyota uses bulbs that have colored coatings. You can not always get the coating off and not all(very few in my experience) parts stores have them.so just spend the few bucks more and get them from Toyota.

May 02, 2015 | 2000 Toyota Sienna LE

1 Answer

No dash lights working in 1998 toyota tacoma


As the tech above stated should be fairly easy to swap a few bulbs out but if you needed any help with this instrument cluster give this company a shout.
southernelectronics.com

Apr 21, 2015 | 1998 Toyota Tacoma

1 Answer

Cluster lights


Yes. those knobs are the bulb holder. Twist and remove .

Good Luck

Mai

Nov 07, 2013 | 2008 Toyota Tacoma PreRunner V6

1 Answer

How do I change my dash lights in my 2003 Tacoma


if it is like my 99 taco that i had then remove the bezel ,2 or 3 screws on top under side of dash pad and pull it out gently. i think there are some clips at the bottom. then there are about 4 screws holding the instrument cluster in the dash. remove them and pull out cluster. bulbs are on the back side . just quarter turn . hope this helps.

Aug 30, 2010 | 2003 Toyota Tacoma

1 Answer

My odometer back light is out. How do I remove the instrument panel in order to replace the bulb? Is there a step by step guide or diagram? I can see three screws that need to be removed and I popped out...


moz-screenshot-3.pngmoz-screenshot-4.pngmoz-screenshot-5.png
    1. REMOVE STARTER SWITCH BEZEL Using a screwdriver, remove the starter switch bezel and disconnect the connector.
    2. REMOVE LOWER CENTER FINISH PANEL Remove the screw and panel.
    3. REMOVE CLUSTER FINISH PANEL

Mar 07, 2010 | 2002 Toyota Tacoma

1 Answer

How do you change dashboard lights in a 2003 toyota tacoma


You need to remove the instrument cluster assembly. You have to remove the cover on the steering column, and then the fascia, in front of the cluster. Next, remove the 4 screws that holds the cluster to the dash. Pull the cluster out, and remove the witing connectors. The bulbs are accessible from the back of the cluster. The bulb replacement can not be done 'from under the dash'.

Nov 21, 2009 | 2003 Toyota Tacoma

3 Answers

How to replace corolla dashboard lights


Difficult to explain step by step. You need yo remove the instrument cluster. If youre technically minded its not very hard, start by loosening the Phillip"s head screws that is visible on the panel directly under the instrument cluster, give it a try!

Regards
Phillip

Sep 18, 2009 | 1995 Toyota Corolla

3 Answers

Replacment of a dash light. Toyota Corolla 1998


There is a plastic garnish surrounding the instrument cluster held in by 2 philips head screws. remove the screws and gently pry the garnish from top first then sides then it should pull out.

Then remove the 3 screws holding the cluster in place (2 bottom 1 top). Once that is done gently flip the cluster bottom up and pull out some to expose the wiring harness. Remove the 3 connectors from the back and then the cluster will pull out.

There are 3 bulbs that control the overall lighting of the cluster. They are spaced about every third across the rear of the cluster. They are the larger Green knobs. Remove the 3 large green knobs and replace the bulbs with the appropriate size. You can call your local parts store to find out the size.

Its a 5 minute job and does not require the entire removal of the dash board.

-ASE Master Tech
-Lexus Senior Tech
99 Corolla Owner.

Mar 13, 2009 | 1999 Toyota Corolla

3 Answers

Resetting the check engine light


On my 2006 you set the odometer to the normal odometer mode using the button on the dash. When you get that setting, hold the button down until the display flashes. Once it begins to flash, let go of the button and then push it again. The light should then go out.

Mar 12, 2009 | 1996 Toyota Camry

1 Answer

Light is out in the dashboard


Remove the screws at the top of the black fascia that is in front of the clear plastic cluster lens

Pull the fascia off

Remove the 4 screws from each corner of the instrument cluster

Pull the cluster out, unplug all of the wire connectors

Do not disassemble the cluster; no need.

The bulbs are accessible at the rear of the cluster; twist to remove the bulb holders

Reassembly is easy, the connectors only fit one way.

Hope this helps.
Thnaks for choosing FixYa

Nov 05, 2008 | 2000 Toyota Tacoma PreRunner

Not finding what you are looking for?
1996 Toyota Tacoma Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...