Question about Cars & Trucks

Open Question

I have a 2002 dodge ram 4.7 white a code p1294 what can be the problem

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 124 Answers

SOURCE: 2002 Dodge Ram 1500 4 w drive rear rotors

Can't tell you exactly how because i don't know what axle you have, but usually just take the main nut in the center off will bring it right out. Remove the wheel, and the brake calliper first and see if it comes off then remove the center nut.

Posted on Mar 23, 2009

bschilz
  • 2049 Answers

SOURCE: code P 0442 on do ram trucdege 2002

This indicates a fuel vapor leak in the EVAP control system. It means a very small leak has been detected. In fact, the leak can be from a hole as small as 0.04" in diameter. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.

A code P0442 most likely means one or more of the following has happened:
A loose or improperly affixed gas cap (most likely)
•A non-conforming gas cap (i.e. not factory/original brand)
•A small leak/hole in a fuel vapor hose/tube
•Other small leak in EVAP system
•Faulty vent O-ring seal

Posted on Feb 21, 2010

timsauto123
  • 750 Answers

SOURCE: dodge ram1500 code p1294

THE IDLE AIR CONTROL MOTOR CODE,IT'S LOCATED ON THE THROTTLE BODY.












TIM...........

Posted on Dec 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CAN YOU PLEASE TELL ME WHAT THIS CODE MEANS P1294 FROM A SMOG CHECK ON A 1997 DODGE STRATUS


The code is "target idle not reached". This indicates that the idle is too fast and this is what sets the code. The cause could be the TPS or the IAC, but normally if these were the problem, you would have additional codes to indicate them.. The P1294 without any other code is most likely going to be caused by an intake leak, one that occurs after the MAF sensor if your car has one, or the throttle body if not.

Mar 13, 2015 | Dodge Cars & Trucks

1 Answer

What does code P1294 mean?


see http://engine-codes.com/

Possible causes
- Vacuum leak
- Throttle cable not free
- Idle speed screw misadjusted

Reason.
The Engine Control Moduel (ECM) has detected idle speed not within specified range




Feb 18, 2015 | 2001 Dodge Grand Caravan

1 Answer

P1294


your idle it too low you have a vacuum leak. check with a vacuum gage

Jan 21, 2014 | 2002 Dodge Durango

1 Answer

99 Dodge Ram 2500 SLT 4X4. Has P1294 code and fast idle when warm.


Well code 1294 is for the computer not being able to maintain the correct idle speed. So the code is because of the problem, not the problem because of the code.
Could be a major vac leak, or a problem with the idle air control valve, or the throttle plate is stuck open.

Jul 31, 2013 | Cars & Trucks

1 Answer

What does a p1294 code mean on a 2001 Dodge Ram 1500


The code P1294 means that the computer is setting a target for the engine to idle at and the engine cannot do it therefore setting the DTC. Solution start by checking or replacing the sparkplugs. Also remove the idler motor from the throttle body and spray it out with carb cleaner. Also spray out the passages in the throttle body that the idle motor use. If that does not fix it you could have another problem like a bad idle motor or something relating to that circuit. Did you replace the TB or make an adjustment to the TPS? As for your spark knock(pinging) this could be related or not. Most of the time pinging occurs is from high combustion tempertures. This could caused by worn plugs,cap and rotor. If not that maybe the truck is running lean but I doubt it because you did not get a code for that. Another thing that could cause pinging on a Dodge truck is oil going into the combustion chambers(i.e. the intake belly pan gasket leaking very common). These are just pointers for you to look at. If you find something else please let us know, it is very difficult to diagnos a problem by word of mouth.

Jun 15, 2012 | 1998 Dodge Ram 1500 4WD

1 Answer

1996 dodge caravan 2.4 code p1294


on dodge motors
fitted a lot of parts and still no better

the fault code clears and comes back as a intermittent problem

could be electrical voltage drop off or heat related failure

i wonder if your 02 sensor ,the catalytic converter
or other related sensors
are causing the fault to come back
if needed .....fit a new air filter...

how the test is determined

P1294-TARGET IDLE NOT REACHED 3.3L/3.8L
When Monitored and Set Condition:
P1294-TARGET IDLE NOT REACHED 3.3L/3.8L
When Monitored: With the engine idling and the transmission in drive, if automatic.
There must not be a MAP sensor trouble code or a Throttle Position Sensor trouble code.
Set Condition: The engine idle is not within 200 rpm above or 100 rpm below the target
idle for 40 seconds. One trip fault.

POSSIBLE CAUSES
INTERMITTENT CONDITION
IAC MOTOR PASSAGES
VACUUM LEAKS
AIR INDUCTION SYSTEM
THROTTLE BODY AND THROTTLE LINKAGE
TEST ACTION APPLICABILITY
images-trsfwikau0d5dnlwn4zno1ix-3-0.jpg

Mar 01, 2017 | Cars & Trucks

1 Answer

ROUBLE CODE P1294


The code P1294 means that the computer is setting a target for the engine to idle at and the engine cannot do it therefore setting the DTC. Start by checking or replacing the spark plugs and wires. Try to use Autolite spark plugs. Also remove the idler motor from the throttle body and spray it out with carb cleaner. Also spray out the passages in the throttle body that the idle motor use. If that does not fix it you could have another problem like a bad idle motor or something relating to that circuit.

Jan 18, 2012 | 1996 Dodge Neon

1 Answer

Dodge ram1500 code p1294


THE IDLE AIR CONTROL MOTOR CODE,IT'S LOCATED ON THE THROTTLE BODY.












TIM...........

Dec 03, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

In my 2002 dodge ram 3500 5.9 l cummings i lose all power and


The first thing to do is to start monitoring the coolant level.
This will rule out the possible of headgasket coolant passage pin hole leak.
Headgasket can go at 170,000 miles+ Less if your truck is doing a lot of hauling.
====
Have you try Amsoil diesel treatment?
It work well for me.
====
I will ran the tank below 1/4 and fill up on NON bio-diesel blend.
Use Chevon diesel until you get the problem figure out.
====
Water can come in three way
air condensation in the morning
coolant
fuel.

Jun 11, 2009 | 2002 Dodge Ram 3500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...