Question about Dodge Cars & Trucks

2 Answers

92 dodge 1500 pick up 360 v8 automatic Starts, runs but hesitates, low power code 37 on diagnostic readour

92 1500 360 v8 tbi code 37, low power rough running lean mixture. Replaced filter, oxy sensor .

Posted by on

  • mike makuh Nov 29, 2012

    I made NO comment about a" rough idle"!!! The problem is with a lack of POWER. When you stomp on it it hesitates and chugs along. It back fires,when it is running under power. Thank you Mr. Brown you are correct about code 37.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 15,441 Answers

Code 37 is torque converter clutch solenoid failure. Transmission wont shift in and out of overdrive.

Posted on Nov 28, 2012

  • Brad Brown Nov 29, 2012

    Check for vacuum leaks

  • mike makuh Nov 30, 2012

    I did, everything is thanks again

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,370 Answers

IDLE ROUGH ISSUES


It can be issue with IAC( idle air control valve) causing the problem.


There are many other possibilities causing these idle issues.Engine idles rough.

There are few help links with solutions to troubleshoot such idle issues.

I suggest you refer the link below and follow its troubleshooting details:------

Click the link below:-----

Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------

Stumbling and stalling at idle after engine rebuild?

http://schematicsdiagram.blogspot.in/2012/03/stumbling-and-stalling-at-idle-after.html

------------

1999 Ford F-150 Idles rough and quits when gas pedal is pressed less?

http://technoanswers.blogspot.in/2012/01/1999-ford-f-150-idles-rough-and-quits.html

---------

Engine stumbles coming off idle when warm?

http://repairhelpcenter.blogspot.com/2012/01/engine-stumbles-coming-off-idle-when.html

------------------

Erratic idle on car?

http://schematicsdiagram.blogspot.com/2011/12/erratic-idle-on-car.html

-----------


Cold start problem and vehicle shudder around 2500 to 3500 rpms

http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html

----------

Low idle when cold out side?

http://repairhelpcenter.blogspot.com/2011/12/low-idle-when-cold-out-side.html

-----------

GMC Sonoma Stalls and idles low

http://technoanswers.blogspot.com/2012/10/gmc-sonoma-stalls-and-idles-low.html

--------


GMC Idle Air Control (IAC) Valve Replacing?

http://schematicsdiagram.blogspot.com/2011/12/gmc-idle-air-control-iac-valve.html

-------------

1996 Camry intermittent engine failure while idle?

http://repairhelpcenter.blogspot.com/2011/10/1996-camry-intermittent-engine-failure.html

------------

Engine quits at idle?

http://repairhelpcenter.blogspot.com/2011/10/engine-quits-at-idle.html

-----------

Car overheats and Air blows hot at idle?

http://howtobyme.blogspot.com/2011/11/car-overheats-and-air-blows-hot-at-idle.html

---------

High Idle Problem

http://repairhelpcenter.blogspot.com/2012/10/high-idle-problem.html

-------

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

---------

Idle flair is noticed on car? Rough idle? car will not idle? Erratic idle speed?

http://technoanswers.blogspot.in/2012/02/idle-flair-is-noticed-on-car-rough-idle.html

--------

High rpm in neutral? Inconsistant high RPM in neutral?

http://technoanswers.blogspot.in/2012/02/high-rpm-in-neutral-inconsistant-high.html

-------

Vehicle stumbling at idle and shows code 54?

http://schematicsdiagram.blogspot.in/2012/03/vehicle-stumbling-at-idle-and-shows.html

----------

Rough idle, staling and Erratic shifting?

http://technoanswers.blogspot.in/2012/03/rough-idlestaling-and-erratic-shifting.html

-----------

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

---------

These details will help.

Thanks.

Posted on Nov 28, 2012

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 49 Answers

SOURCE: 2005 Ford Escape Rough Idle - engine code state lean fuel mixture

I recommend getting a repair manual from an auto store for your vehicle. They run $15 to $20. It will tell you exactly how to do everything you asked and also give you the values that should be expected. Hope this helps.

Posted on Feb 08, 2009

  • 89 Answers

SOURCE: 1995 chevy silverado 350 TBI V8 standard powerloss

have you checked the filter, i know you state the fuel lines are clear though. likely fuel injectors have lost flow. the TBI injectors can be cleaned, but i usually just replace them. but check them using a timing light hooked to the coil wire for timing of each injector spray. the pattern under the light should be even and conical shape, no major spatter. if one shows low volume, the other one should be replaced at same time, it will save you having to change it when you put brand new next to old one a have same problem again. only replace with brand new, i've had 7 bad remanufactured injectors on one truck at one point in time, only replace with new!

Posted on Jul 08, 2010

  • 2309 Answers

SOURCE: p0106 and p0107 codes are coming up on 2001 dodge

have you checked the egr system and check for a vacuum leak???

Posted on Nov 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

P0308 code intermintently pops up can i pass smog


  • Check Engine Lightflashing
  • Rough running, hesitation, and/or jerking when accelerating
  • In most cases, there are no adverse conditions noticed by the driver
  • In some cases, there may be performance problems, such as dying at stop signs or rough idling, hesitation, misfires or lack of power (especially during acceleration), and a decrease in fuel economy

OBD diagnostic tool

May 08, 2014 | 2001 Dodge Durango

1 Answer

My 2004 Dodge Ram 1500 Hemi 5.7L V8 is running two codes PO175 fuel system rich 2/1 and PO131 O2 Sensor circuit 1/1 low does this mean I need new o2 sensors or what?


faulty O2 sensors will throw a lot of things out of whack so start there, allow diagnostic reboot, drive and check codes again...

Oct 01, 2010 | Dodge Ram 1500 Cars & Trucks

1 Answer

What does the p1391 code on a 99 dodge ram 1500 5.2l v8 meen


check engine light and code P1391 crank or cam position sensor

The above can cause rough idle on the Dodge Ram 1500 5.2L V8 Engine.

Can try to replace the sensor, but verify that the wires are ok first.

Aug 12, 2010 | Dodge Pickup Cars & Trucks

1 Answer

Starts runs realy rough then dies put new fuel


It sounds like you already solved your problem. Attach fuel gauge to fuel rail pressure line and monitor for fuel pressur (above 30 p.s.i. @ crank). If pressure low suspect pump. If pressure o.k. but dies out and pressure drops but restarts, check oil sending switch as this controls fuel pump. Computer primes pump for start, then oil sender powers up pump for normal operation. Check for oil leaking at terminals on sender. Also check plug connector at fuel sender on tank as they are known to melt and fail. If fuel not problem, check for spark as ignition module failure is common. Have obd2 diagnostic run to check for codes as this may help with diagnosis.

Dec 26, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

High idle CHevy 350 TBI


check if went from a V6 TO V8 need power two more cylinders

Jun 20, 2009 | 1992 Chevrolet K1500

2 Answers

98 Dodge 1500 problem codes indicate mulitpule misfiring


This could be your problem. If this is not it then email me at chuckie12_87@yahoo.com and I can help you to troubleshoot it a little more in depth

Jun 12, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Engine runing rough


This code is most likely not related to the problem, it sounds like you may have picked up some contaminated gasoline, maybe has water in it or other like dirt.

May 20, 2009 | 2003 Dodge Ram Maxi

2 Answers

2001 dodge ram 1500 fault code 1687


Heryou go its a pretty lengthy diagnostic procedure it appears there is a power problem with the instrument cluster here is the code meaning hope it helps have a good dayDB0b0195e.gif

Feb 19, 2009 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

761 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...