Question about 1997 Ford F250 SuperCab

Open Question

1999 Ford f-250 Super Duty transmission shifts hard

I have a 1999 Ford F-250 Super Duty and the transmission will work good for 20 minutes or so and then start shifting very hard. The overdrive light on the shifter lever will start blinking at the same time.

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76630 Answers

SOURCE: hard shift and blinking overdrive

The blinking overdrive button is telling u that a serious fault has occurred in the electronic controls or a mechanical fault such as excess slippage is occurring.

Posted on Nov 06, 2008

Ad
  • 4 Answers

SOURCE: overdrive contoll button is blinking on 200 f-350 7.2 powerstroke

It sound is if your ABS/Speed sensor is the culpret.  Try this fairly inexpensive repair before you bring it in for a Diagnostic, which can run anywhere from $89.95 & up.  Go to the local ford dealer in your area and ask them for the ABS Sensor in your rear axle differential. The base part number being 9E731. This part runs roughly for about $20.00+ and your own time to replace it. 

Posted on Mar 23, 2009

localwonder
  • 6784 Answers

SOURCE: Transmission trouble on 2002 Ford E-450 Super Duty

Hi, this is a defective OD shift solenoid that is located inside the trans pan. you will have to drop this pan in order to extract it for replacement. this solenoid, if damaged, cant initiate the shift sequence required for the OD to engage during operational procedures.

Simply replacing this solenoid will fix this issue.

NOw, concerning the erratic shifts. this is isolated within the transmission control module. it seems to be malfunctioning. you will need to replace this module as well.

Posted on May 21, 2009

  • 1 Answer

SOURCE: The ABS light stays on and the Overdrive light on

Same problem with my '99 Super Duty. The speedometer was also malfunctioning. Replaced the ABS sensor mounted on the rear transaxle. Costs approx. $30 and fixed the problem.

Posted on Aug 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 ford ranger shifts hard from 2nd to 3rd gear what is the problem I recently changed fluid and filter but shifts hard !


Auto Trans not shifting correctly from 2nd to 3rd - Ford Explorer ...

www.explorerforum.com > ... > Under the Hood

May 8, 2004 - 19 posts - ‎9 authors
Auto Trans not shifting correctly from 2nd to 3rd Under the Hood. ... Become an EliteExplorer. Lithuania. 1999 5.0. Join Date: Jun 2003. Posts: 107 ... When this happens, the transmission will skip to the next gear like you said.

Transmission Harsh shifting - YouTube

? 3:59
https://www.youtube.com/watch?v=aAoiL4vR8Qw
Jan 13, 2013 - Uploaded by James Burns
... Doctor, explores the causes of harsh shifting in automatic transmissions. ... Early diagnosis is important to ...

Hard Tranny Shift between 2nd & 3rd - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > Super Duty & Heavy Duty
Feb 24, 2012 - Hard Tranny Shift between 2nd & 3rd Super Duty & Heavy Duty. ... I just got a new to me 99 f250 5.4 V8 SD XLT 4x4 Auto Trans longbox 118k miles. ... it out and said it was solid except for a hard shift between 2nd and 3rd gears. ..... Hard shift between 2nd and 3rd, Brenda Lamka, Explorer, Sport Trac, ... hard shift 2nd to third gear only 4r100
Dec 26, 2012
hard shift into 3rd
Nov 4, 2009
4r55e 5r55e Ranger / Explorer Transmission Problems - CLICK ...
Mar 15, 2007
00 Expedition trans shifts late and hard

Jan 01, 2016 | Ford Cars & Trucks

1 Answer

2008 F-250 will cut in and out after driving for about 20 minutes.


Check the radiator fluid level and top up if needed.
Check the gearbox oil level and for signs of discolouration. Replace if needed.

Nov 14, 2012 | 2008 Ford F 250 Super Duty 4WD

2 Answers

What size torque bit to get brakes off? 1999 expedition


To front pads, tighten the caliper pins to 16-30 ft. lbs. (22-40 Nm) on 1997-98 F-250HD, F-350 and F-Super duty models. Tighten the caliper pins to 21-26 ft. lbs. (28-36 Nm) on the F-150, F-250, Expedition and Navigator. Tighten the caliper pins to 42 ft. lbs. (56 Nm) on the 1999-00 F-250SD, F-350 and F-Super Duty models.

To install the rear disc brake caliper onto the rear support bracket. Tighten the caliper retaining pins on the F-150, F-250, Expedition and Navigator to 20 ft. lbs. ( 27 Nm). Tighten the caliper retaining bolts on the 1999-00 F-Super Duty models to 27 ft. lbs. (36 Nm.)

Hope helps.

May 09, 2011 | 1999 Ford Expedition

2 Answers

How to replace the speed sensor on a 1999 ford f-250 super duty. I can't even locate it on the vehicle.


the speed sensor might be located on the rear differential or it might be located in or on the transmission.

Jun 30, 2010 | 1999 Ford F250 Regular Cab

1 Answer

Coolant leak at rear of 1999 F-250 Super duty engine...appears to be solid pipe leak at manifold height...unable to reach...how do you get to it?


you have to have 3 ft long extension with a swivel socket and get underneath truck and go along side and pver transmission

Apr 12, 2010 | 2001 Ford F250 Super Duty Super Cab

1 Answer

The ABS light stays on and the Overdrive light on the gear shift flashes on my 1999 250 Super Duty.


Same problem with my '99 Super Duty. The speedometer was also malfunctioning. Replaced the ABS sensor mounted on the rear transaxle. Costs approx. $30 and fixed the problem.

Aug 03, 2009 | 2008 Ford F-250 Super Duty

1 Answer

Ford 1991 super duty speedometer stopped working and transmission wont shift


Sounds like the vehicle speed sensor is not working, or the gear on it is stripped. If you look at the rear housing of the transmission, you will see a black plastic sensor protruding from it with a two wire connector and the speedometer cable attached to it. The sensor might be coming apart or the gear that is driven off the output shaft is stripped. The speed sensor, along with the governor, tell the transmission when to shift. You can remove the sensor by simply taking out the bolt that holds it in. A small bracket around the sensor is secured by this bolt. Carefully look at the nylon gear to see if it is worn through the middle.

Jul 22, 2009 | 1999 Ford Super Duty F 450

2 Answers

2008 Ford f-250 4x4 transmission shifting problems


TAKE IT TO THE DEALER IT HAS A 3 YEAR/36K WARRANTY

May 05, 2009 | 2008 Ford F 250 Super Duty 4WD

1 Answer

Stuck in first gear


automatic transmission will not shift out of first gear. We have replace the solenoids in the valve body 3 of them , could the pcm computer be bad or does the tranny need to be rebuilt? The 2005 ford 250 has only 21000 miles but it did have a snow plow on it. It did pull trailers.

Dec 19, 2008 | 2005 Ford F 250 Super Duty

Not finding what you are looking for?
1997 Ford F250 SuperCab Logo

Related Topics:

591 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...