Question about 2009 Jeep Liberty

Open Question

Power door locks not working in 2009 jeep liberty

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 137 Answers

SOURCE: Inoperable Power Window 2006 Jeep Liberty

the window regulator needs to be replaced

Posted on Jan 19, 2009

Ad
thecanfields
  • 2 Answers

SOURCE: Drivers side door power locks and windows control doesn't work.

PULL THE DOOR OFF MAKE SURE THE 2 LITTLE DOOR HANGERS ARE CONNECTED TO THE SWITCH MECHANISM IF IT IS. THEN YOUR SWITCH IS BROKE. GO TO SCHUCKS AND ASK THEM IF THEY CAN ORDER YOU A WHOLE NEW DOOR LOCK SWITCH ASSEMBLY. REWIRE AND TAA-DA!!!

Posted on May 10, 2009

seans46
  • 161 Answers

SOURCE: power locks on 04 jeep liberty not working

Most of the times on jeeps and all chrysler auto's they have a body control modual this is what controls your door locks , windows ect. It should be in the owners manual for all fuse location and identification. A shop with a scanner can check the door lock system for you. body control moduals go bad alot on all chyslers and if you buy one you need to buy it from the dealership they will program it . So check the owners manual for a fuse and then have the body control mod checked

Posted on Jun 02, 2009

  • 412 Answers

SOURCE: 2002 jeep power windows and door locks stopped

SOUNDS LIKE YOU HAVE BROKEN WIRES BETWEEN DRIVER'S DOOR AND BODY AT A PILLAR..PULL RUBBER BOOT FROM BODY AND DOOR AND INSPECT WIRING HERE

Posted on Jun 21, 2009

  • 6982 Answers

SOURCE: 2001 Jeep Cherokee sport. Power door lock won't

Lock and unlock both run off the same power supply...I'd be looking for a bad switch or a broken wire in the door harness where the wires go through the rubber boot between the door and pillar.

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Luz marcada con el numero cinco?


2003 Jeep Liberty- Reading Engine / Diagnostic Codes ...

? 1:13
https://www.youtube.com/watch?v=pGrPBBzp7wE
Jan 6, 2013 - Uploaded by DeathScouter
2003 Jeep Liberty- Reading Engine / Diagnostic Codes ..... error code will flash 2 times, brief pause, flash 1 time, pause, flash 5times, pause, ...

2005 Jeep Liberty possible cause of P0442 error. - YouTube

? 5:26
https://www.youtube.com/watch?v=2ba-gH0gadg
Dec 21, 2014 - Uploaded by TheBGravit
While replacing a bad fuel pump I believe I found the cause of a P0442 Error code. I was able to repair the ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - My jeep Liberty 2009 does the same the Dashboard showed a code of cylinder .... i have a jeep liberty 2006 with the # 5 cylinder misfire. i replaced the sparks... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the ... 2002 jeep liberty camshaft posistion sensor error code p0340 5 answers.

Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Recently got a second hand 2005 Jeep Liberty Sport. Everything worked fine ... #5intake valve seat dropped and held open the intake valve. 2008 Jeep Liberty.

OBD-II Trouble Code: P0305 Cylinder 5 Five Misfire Detected

www.obd-codes.com/p0305


Dec 08, 2015 | 2005 Jeep Liberty

1 Answer

Cannot access door latch assembly 2009 JEEP LIBERTY


all this is covered in the FSM. step by step. under body or doors.
2nd best is alldata.com
what door? you never said and steps can very by body options.
name the door,
i guess the latch is bad?
here are the words, for door lock motor.
lots of steps. my wild guess , it the door cover is off.
and the plastic film removed
and you get stuck here,
  1. Remove the tape covering the access hole on the carrier plate and discard. Access the window regulator liftplate through the hole in the carrier plate.
  2. Push down the door glass (1) and use a slotted screwdriver to release the tab on the window regulator liftplate (2). Lift the glass up and secure to the header.
  3. Remove the three screws (2) securing the door latch to the door shut face.
  4. Remove the one screw (1) attaching the latch bracket to the door shut face.
  5. Disconnect and remove the electrical connector (1) from the door (4).
  6. Remove the 10 screws (3) from the carrier plate (2).
  7. Disconnect the outside mirror electrical connector.
  8. Remove the carrier plate (2) from the door (4). end

once carrier is out there is chapter on that , disassebly

really, buy the FSM
or log in to alldata.com
and avoid making wrong moves, or getting hurt.

Apr 02, 2014 | 2009 Jeep Liberty

1 Answer

2009 jeep liberty only drivers door unlocks


you just get this car.
or it worked before but not now? key questions.

door switch driver and RKE not working right.

and some cars the driver has a master switch and local switch.
and some have a kids safe switch that kills the other doors.
i dont have the opr,guides. for liberties.

in this case , this is a programmable feature. most newer jeeps.
you can program most cars. for (only driver door works with fob)
this is for security, (like airport parking , alone, at night)
the operators guide (lost already )covers this. in the glove box.
most folks don't read it ,they just drive to jeep service and
ask to have it set like you want. and pay $100.
it could be a fault too... but that will take checking above first.
on my other car, i must click 2 times to open all doors, (GM)

the dealer will scan the PCM/BCM puters. to see if they are throwing
DTC errors. any good scan tool can do this.
and check fuses first. never last. or get egg in face.

did you read this?
http://justgivemethedamnmanual.com/jeep/jeep-liberty-owners-manuals/

lost it , then get it and put it on a flash stick and put it back in the glove box or burn a CD . (or kill a tree and print it)

page 21
To Unlock the Doors and Liftgate
Press and release the UNLOCK button on the RKE
transmitter once to unlock the driver's door or twice to
unlock all doors and the liftgate. The turn signal lights
will flash to acknowledge the unlock signal. The illuminated
entry system will also turn on.

Remote Key Unlock, Driver Door/All Doors First
This feature lets you program the system to unlock either
the driver's door or all doors and the liftgate on the first
press of the UNLOCK button on the RKE transmitter.
To
change the current setting, proceed as follows:
• For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), refer to "Remote Key
Unlock," under "Personal Settings (Customer-
Programmable Features)," under "Electronic Vehicle
Information Center (EVIC)" in Section 4.

end quote.

my GUESS, you didnt RTM.
read it.

Mar 21, 2014 | 2009 Jeep Liberty

1 Answer

Power locks not working


lots of issue
find an ASE mechanic and its done.
DIY? got tools?
if you have DMM , voltmeter
then read the topics in the FSM or at alldata.com.

Jan 07, 2014 | 2009 Jeep Liberty

1 Answer

My 2009 Jeep Liberty will turn on but the instrument panel will not?


sounds like lock cylinder is shot
but google jeep liberty forums and post there

Feb 02, 2013 | 2009 Jeep Liberty

1 Answer

My automatic headlights stopped working on my 2009 Jeep Liberty. I can turn them on manually.


My 2008 jeep liberty's headlights flickered when I was just driving down the road in the dark and then completely shut off on me. My fog lights are the only lights that work now and my lights continue to blink off and on a couple times and then completely off. Now that this has happened my jeep will continue to lock and unlock itself and also my blowers for heat and cool air will not blow at all...

Feb 02, 2012 | 2009 Jeep Liberty

1 Answer

I have a 2006 Jeep liberty and my key clicker does not work on the drivers door but does on all the others. The power lock and unlock button inside works on all but drivers dooe whats wrong and how do i...


Failure of the Lock energiser. Take the Door trim Off, diconnect the Electric connector, Using a remote power supply connect that ,using the correct polarity, Pos to Pos....Neg to Neg, if you get no response, there is the problem.

Regards.DT

Aug 26, 2009 | 2006 Jeep Liberty

2 Answers

Power locks on 04 jeep liberty not working


Most of the times on jeeps and all chrysler auto's they have a body control modual this is what controls your door locks , windows ect. It should be in the owners manual for all fuse location and identification. A shop with a scanner can check the door lock system for you. body control moduals go bad alot on all chyslers and if you buy one you need to buy it from the dealership they will program it . So check the owners manual for a fuse and then have the body control mod checked

Jun 02, 2009 | 2004 Jeep Liberty

1 Answer

Power windows and door locks not working ,checked all fuses look good?


My jeep liberty passenger side door won't open and the window won't go up or down....what is the problem?

Apr 14, 2009 | Jeep Liberty Cars & Trucks

Not finding what you are looking for?
2009 Jeep Liberty Logo

Related Topics:

701 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...