Question about 2004 Chevrolet Silverado 2500HD

1 Answer

4-wheel drive won't shift into gear

2004 chevy silverado 4x4 shifter won't move

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

I take it you have the manual t-case shifter on the floor. If so check all your linkages from the shifter to the t-case, if all appears well, simply disconnect the linkage from the t-case and see if it moves if it does your problem is in the shift mechanism in the t-case. if it still wont move even while disconnected clean and lube the linkage. If this still doesn't do the trick. replace your linkage

Posted on Mar 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I can shift into drive but it won't engage


sounds like a broken shift cable. (the connection between the shifter and the gearbox) common symptoms are the shifter move easier than normal.and does not move to any gears (not even park or neutral).

Nov 23, 2013 | 2004 Chevrolet TrailBlazer

1 Answer

When my 02 silverado 2500hd is in 4x4 the tires are locked and the truck won't move until I shift back to 2hi. Differential or Encoder Motor?


You can take this with a grain of salt but I am a junior in high school taking auto mechanics and my teacher use to work for a chevrolet dealership where they had a geo tracker come in because it would drive fine until placed in 4 wheel drive. Once placed in 4 wheel it would not move because front and rear differentials were geared differently from factory causing the wheels to lock up. If it has never been able to go into 4 wheel since you have owned it I hope this will help...

Feb 25, 2013 | 2002 Chevrolet Silverado 2500HD

2 Answers

On a Chevy malibu ltz, what is the button on the left side of the shifter that say + and - for?


these buttons are for you to change gears manually. should be able to slide shifter over into a slot and shift gears up/down by moving shift arm.

Jan 10, 2011 | Chevrolet Malibu Cars & Trucks

2 Answers

2004 Chevy Silverado will not shift out of park, has a leaking transmission line. If fluid is low will it cause this problem


it will cause it not to move in gear,for the transmission runs on pressure from the fluid,if it doesn't shift out of park at all could be lingage on shifter.











TIM.............

Oct 23, 2010 | 2004 Chevrolet Silverado 2500HD

2 Answers

HOW TO USE 4 WHEEL 1980 CHEVY K20 PICKUP


have truck running,,put shifter in neutral,,shift into high lock 4x4,then put truck into gear,,u can shift from high lock to high gear,,from two wheel to four wheel,,in high only,,if u want to shift transfer case in low,,u have to put truck in ,,neutral,,first,,

Feb 06, 2010 | Chevrolet K2500 Cars & Trucks

2 Answers

2004 chevy silverado 1500 4 wheel drive wont work..


try selecting from nutreul or less then 3km

Feb 02, 2010 | 2003 GMC Sierra

2 Answers

Vehicle: 2005 Chevy Silverado 2500HD 4X4 Duramax. Problem, when I trying switching the 4 wheel drive switch to 4LO, the light just blinks continuously.


You should have it put on diagnostic scanner to tell for sure. system needs to be tested. As a mechanic myself, I know these can be done fairlty easy on most vehicles but some can be slightly tricky

Aug 27, 2009 | 2004 Chevrolet Silverado 2500HD

1 Answer

4x4 won;t unlock


start the vehicle, shift transmission to nuetral. then move the 4x4 shifter to the 2wd position. then shift the transmission into reverse and back up a few feet straight, then drive forwards. it should be out of 4x4.

Jan 12, 2009 | 2004 Jeep Grand Cherokee

2 Answers

1988 suzuki samurai WONT MOVE


First thing just try to push or pull the 4x4 lever if you get it to move and it feels like it went into some gear try to drive the truck.If this works look on the shifter for the 4x4 and put it in 2 wheel drive (H2 is two wheel drive,H4 is 4x4 high,and L4 is 4x4 low range).Make sure you have the clutch depresed when you try to move the 4x4 lever.If you try this stuff with no fix try and look for clutch adjustment on the transmision you may need to adjust it or your clutch is bad.

Aug 30, 2008 | 1988 Suzuki Samurai

Not finding what you are looking for?
Cars & Trucks Logo

543 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...