Question about Cars & Trucks
Knock sensor located on the side cylinder block below intake manifold.
Posted on Nov 27, 2012
The Trionic engines don't work like the old ones which had a physical knock sensor bolted onto the engine block. Trionic (the engine management system) uses the ionisation and discharge of the DI unit (coil pack) to detect knock. As Wessy says, there is no separate "knock sensor" on these cars.
Posted on Nov 27, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
A SAAB dealer should be able to print one out for you. BTW that engine is practically identical to the V6 used in a caddy Catera, and Saturn Ion. Those diagrams would be the same, so you might want to search that also.
Posted on Mar 25, 2009
Hi,If you press and hold the reset button on the SID unit the message will go out ,however it might come back on a few times so you may have to repeat this for a couple of days till it stays out.
Posted on Feb 01, 2009
To replace the headlamp on a Saab 9-3, open the hood. Behind the
headlamp there is a round black plastic cover; screw clockwise and pull
back; there is a metal clip holding headlamp in place (9003 i believe
is the halogen number). locate top of clip and move very slightly
clockwise; the top will pivot down on a hinge; release the wire harness
and pull out bulb. Retrace these steps to introduce the new bulb to
Hope this helps. Please leave a rating! FIXYA!
Posted on Apr 28, 2009
replace it. there is a connection or a short in the sensor that's throwing the code. Get your Saab parts at Carquest Auto Parts, They have a WORLDPAC division for all hard to find(and easy) parts. trust me, you will save a fortune on Saab, Mercedes, Volvo and other high end parts.
Posted on Aug 29, 2009
SOURCE: Throttle posotion sensor saab 95
NO. replacement is the only option after it is verified by a qualified shop that it is indeed bad.
Posted on Sep 16, 2009
Testimonial: "thanks i cleaned it and workes ok now so dont need new one"
Tips for a great answer:
Oct 16, 2017 | Saab Cars & Trucks
Oct 28, 2010 | 2000 Ford Focus
May 18, 2010 | 2000 Saab 9-3 Viggen
May 08, 2010 | 1997 Saab 900
Apr 15, 2010 | 2000 Saab 9-3 Viggen
Jun 23, 2009 | 2001 Saab 9-3
Feb 26, 2009 | 2001 Saab 9-3
Dec 29, 2008 | 2000 Saab 9-3 Viggen
Jun 18, 2008 | 2000 Saab 9-3 Viggen
251 people viewed this question
Usually answered in minutes!