Question about 1996 Jeep Grand Cherokee
It just strated shaking whenn it got cold out.. it runs fine when its driving but if im stopped it shakes and jumps sometimes.. i have had my throttle body cleaned out already.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Could have a bad map sensor. The Map sensor is located on the throttle body. I have seen countless Jepp that start blowing black smoke when they go bad. That would be a good starting place.
Posted on Sep 13, 2008
P0505 means the whole Idle Control system, not only the IAM. Check all related sensors (i.e. crankshaft sensor). Check with a voltmeter direct at the connector of the IAM if you get any signal. Remove the IAM from the TB, connect him, let someone switch your ignition key to ON. The IAM need to drive in/out for a short time to find the right position. Hold the IAM near a hard part, that they cant drive out completely! If IAM works fine, check the fuel pressure, check and clean your TB ( if not done yet). If that doesn't work, come back again please
Posted on Oct 27, 2009
You should add a rs4 performance chip or the fuel economy chip also made by rs4. there like 70 bucks. If the problem is electrical changing your chip could solve the problem. Even if is doesnt work the chip will make your truck idle more smoothly, have better throttle response, and you will add 3-7 mpg. I bought one for my 1997 jeep grand cherokee straight six, and it felt like i was driving a different truck . It mae that much of a difference...you cant loose!!!Like everyone says , it could be a vac leak or a clogged fuel filter , soetimes bad gas...your problem is a needle in haystack. Try the chip...I hope this helps
Posted on May 24, 2010
do a self test on your Jeep's computer by turning the ignition key off-on,off-on,off-on ( on is when the dash lights are on, off is one click back). The codes will either flash out on your check engine light in pairs, 5-5 is the end of the test. or if you have a digital odometer the codes will display there. Report back with the codes to help identify any problems.
Posted on Oct 13, 2010
Tips for a great answer:
Jan 26, 2014 | 1996 Jeep Cherokee Country
Dec 07, 2012 | 1997 Jeep Grand Cherokee
May 11, 2011 | 1997 Jeep Grand Cherokee
Nov 07, 2010 | 1999 Jeep Grand Cherokee
Sep 15, 2010 | 1996 Jeep Grand Cherokee
Sep 04, 2010 | 1996 Jeep Grand Cherokee
Apr 27, 2010 | 1993 Jeep Grand Cherokee
Feb 21, 2010 | 1996 Jeep Grand Cherokee
Jul 08, 2009 | 1994 Jeep Grand Cherokee
Feb 11, 2009 | 1996 Jeep Grand Cherokee
322 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: