Question about 1997 Geo Prizm
I added a quart of oil but I'm not sure if I should try and start it since it was so low on oil.
Fill it up with oil and and try to jump start it with some jumper cables
you may also try to turn the engine over by hand by using a scoket on the crank pulley if it turns over real hard or will not turn over the engine may need to be replaced do to no oil
Posted on Nov 27, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1995 Geo Prizm won't start
I just checked the battery connection and what I thought was a good connection wasn't. It need new connectors on the post. Runs fine after I tightened them more.
Posted on Dec 12, 2008
SOURCE: 1993 Geo Prizm turn signals
You have a bad turn signal switch if the hazards work and the turn signals do not. It has nothing to do with the fuse or the flasher unit. Your switch is bad or you have a bad connection some where.
Posted on Feb 15, 2010
SOURCE: 1997 Geo Prizm - does not start
sounds liike a fuel problem, turn key on without starting listen for fuel pump kicking on if it does now check the connections at the pump/fuse if it is kicking on the you can check the fuel pressure by checking the little valve on the fuel rail next to the intake looks just like the air valve on your tires if there is no pressure then check fuel filter.
Posted on Jul 15, 2010
Tips for a great answer:
Jan 13, 2013 | Cars & Trucks
Dec 09, 2012 | Cars & Trucks
Jun 09, 2012 | 1992 Geo Prizm
Jan 21, 2011 | 1993 Geo Prizm
Nov 27, 2010 | 1997 Geo Prizm
Aug 09, 2010 | 1996 Geo Prizm
Oct 30, 2009 | 1996 Geo Prizm
173 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: