Question about 1999 Mercury Mountaineer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I have a 2004 mercury mountaineer 4.0 liter. Had to remove the visor to replace so cut wires to visor light to remove and now the power window along with the radio and gas gauge don't work. Need adv
Check fuse 17(15amp) in the interior fuse panel.
Posted on Apr 17, 2009
I'm not sure if yours works the same way but I just have a button on my mirror that you can move all the way to the left to deactivate it.
Posted on Aug 02, 2009
There is some problem with the door switch(s) which should turn the lights off when the door is closed. Look closely at the switch and make sure that the proper contact is being made within the switch. There could be corrosion.
Posted on Oct 11, 2009
The thermostat is beneath the inlet housing from the top radiator hose. You are better off working on a cold engine and adding a little antifreeze when you finish to replace what you will lose when you remove the parts.
There should be 2 bolts holding down the fixture and there will be a round "O" ring type gasket sealing the fixture. Observe the direction of the thermostat so that you replace it right side up instead of backwards which is possible in some cars. Then replace the gasket and lightly bolt the housing down evenly. It is a soft metal and brute force will bend or break parts. Start your car and check the water level after you have turned on the heater and the car is hot. Add antifreeze to the overflow tank.
Myself, I take a half gallon bottle of hot soapy water and wash the engine area off to get rid of the antifreeze smell and it makes it easier to detect a leak if you have one.
Posted on Oct 27, 2009
remove battery and wait 30 secs computer now clear
re install cable and start with no codes
if air bag light comes on then you have a loose wire
Posted on Jan 10, 2010
Testimonial: "thank you for your help!"
Tips for a great answer:
Apr 07, 2014 | 2001 Mercury Mountaineer
Aug 12, 2013 | 1999 Mercury Mountaineer
Aug 20, 2012 | 1998 Mercury Mountaineer
Aug 17, 2012 | 2001 Mercury Mountaineer
Sep 05, 2011 | Mercury Mountaineer Cars & Trucks
Feb 01, 2011 | 1998 Mercury Mountaineer
Dec 30, 2010 | 1999 Mercury Mountaineer
Feb 16, 2010 | 2002 Mercury Mountaineer
Oct 28, 2009 | 2000 Mercury Mountaineer
108 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: