Question about 1995 Mazda MPV

1 Answer

1998 mpv van strange problem of starting

My mpv 1998 van it start then keep running for one or two days but then stopped and does not start.I got it diagnosed, and they said it is the computer.I change the computer and it started right away.now it is again stopped and does not start. they told me it is starter, I changed the starter still not starting, spark is coming in the plugs but no one knows what is the problem.Is someone there very knowledgeable who knows what i it?
thanking you in advance.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Locate the starter relay and possibly the ignition relay on the fuse panel under the hood or under the dash and replace it.

Robert

Posted on Jan 10, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 1998 mpv starting problem

I sprayed quick starter, added some fuel injection cleaner and deicing liquid in the gas tank. for the time being it is running but for how long ? I do not know.

Posted on Jan 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can anyone tell me where the camshaft sensor is on a 01 Mazda MPV mini van 2.5


W age of car..hard startn cud be a tuneup issue..bad dist cap..plug wires..fuel pressure reg or pump..git a data stream run w a factory scan tool....at a private shop only...for correctness n detail

Apr 22, 2015 | 2001 Mazda MPV

1 Answer

I have a Mazda MPV 2003, i bought from japan, 7 months ago, this van was running well until two days ago, it stsrts and cut off, starts again and while driving it is losing power then it will speed up


Before any diagnostics, I would run a tank of gas with a bottle of fuel dryer and injector cleaner to ensure that the engine racing isn't resulting from moisture and clogged injectors.

Jul 28, 2014 | 2000 Mazda MPV

1 Answer

Had a fuel pump installed and now the car wont start.


Check the following:
- Fuel pump pressure.
- Polarity.
- Fuel filter.
If the problem persists keep the starter motor engaged for 8 Seconds.
- Switch the ignition OFF.
- Pull up the error codes with diagnostic computer.

Mar 03, 2014 | 1998 Mazda MPV

1 Answer

The engine on my 2000 MPV cuts out and dies when I press the accelerator. After it sits for an hour or so, I can travel for 20 min. or so before the problem starts again. HELP!


if its been a while change the fuel filter and then have the fuel pressure and volume checked.these symptoms are very common for a fuel pump problem.

Feb 07, 2012 | 2000 Mazda MPV

2 Answers

After replacing starter on Mazda MPV,O/D light started flashing,Mech says it could be transmission problem,but the van was running fine before I took it in for repairs.Can you give me any suggestion


someone has broke or disconnected a wire somewhere under the car whilst changing the starter motor ,but what or where i couldnt tell you without having car on the ramp sorry

Nov 13, 2010 | 2001 Mazda MPV

1 Answer

1998 mazda mpv code p0170 erase code car runs fine but when i stop for a few minutes it is hard to start and runs rough the engine light comes back on and the code will read p0170 again


This code indicates a fuel ratio problem. I would start by inspecting all the vacuum lines, including the pcv hose and power brake hose. Carefully inspect the air intake hose. This is the large hose between the throttle body and the airflow meter. If this hose is cracked or loose the computer will not sense how much air is being drawn into the engine and it will be hard to start.

Feb 22, 2010 | 1998 Mazda MPV

2 Answers

I have a 2003 Mazda MPV , the problem only happen


I ahve same issue with my 2004 MPV. I replaced the plugs, coils etc. No help.

did you ever get it fixed?

Jan 21, 2010 | 2003 Mazda MPV

Not finding what you are looking for?
1995 Mazda MPV Logo

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...