Question about 2001 Chrysler Sebring

1 Answer

Interior lights when i open the driver's door the interior lights doesn't work! when i open passenger's door everything are working

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Door switch operation when drivers door pin switch open position; poor ground circuit control. Try wiggle testing pin switch. Harness is routed from door switch along floor board rocker sill.

Posted on Dec 09, 2012

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14585 Answers

SOURCE: pt cruiser tail lights front light & driverds door wont open

The headlight, brake and turn signal all run out of the turn signal switch. this is what causing you to loose those items. the door is a clip that has broken inside the door that goes to the handle, you will have to take the door panel off to find the rod that is hanging

Posted on Jun 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

ELECTRICAL PROBLEM


take it to a body shop

Nov 27, 2013 | 2000 Dodge Stratus

1 Answer

Ford ZX2 courtesy lights and chimes


Sounds like a problem with the sensor in the driver's door latch.

Jun 28, 2013 | 2002 Ford ZX2

1 Answer

Interior lite and doorajar lite don't work when passenger door is not closed


a faulty wire on door check your fuses and replace them for the doors

Jan 14, 2013 | Cars & Trucks

1 Answer

2003 chevy trailblazer driver door controls don't work, interior light won't work when driver door is opened. The other three doors work ok


There two common problems with the driver's door control panel, rain water gets into the module and damages the electrics or the wires in the door boot break or abrade and short out. To check out the control panel itself, take the passenger side panel and hook it up to the drivers side, if everything works, replace the driver's panel.

Dec 16, 2012 | 2003 Chevrolet TrailBlazer

1 Answer

Power door locks don't work; interior lights don't work; intermittent front wipers don't work but low and high setting do; headlights switch doesn't work; interior dome lights don't...


these trucks have a generic body control module in the left kickpanel. just remove the plastic trim from the drivers floor molding to access the module. inspect the wire for green dust or gel. if there is signs of this then you have a corrosion problem. disconnect you battery and then try cleaning the corrosion all off using contact cleaner and penetrating oil. once the corrosion is gone then reconnect everything and try to see if it works. If not then it is possible that the module is damaged. you will need a new one.

Oct 28, 2011 | 2001 Dodge Durango

1 Answer

No buttons on the driver door panel work. the interior light doesn't come on when the drivers door is open. All fuses are good. :::::


Two possibilities, broken wire in harness that goes between body and door or a bad driver's door module. You can temporarily swap in the passenger side module to troubleshoot.

Aug 31, 2011 | 2007 Chevrolet TrailBlazer SS

2 Answers

My interior lights wont shut off and it drains the battery, how do i switch off the fuse so my battery doesnt die?


When you open the driver's side door, you will find a small switch located on the front of the door frame towards the engine compartment. If you push it, the lights should go off. If you push it and the lights don't go off, there is your problem - if the driver's door switch is okay, try the passenger side by doing the same thing.

If that doesn't work and you are sure that you have the panel switch set to off, then you may want to pull the bulb out of the interior light until you can get to the root cause.

You may not be able to pull the fuse without losing other functions too.

Aug 06, 2011 | 1997 Oldsmobile 88

1 Answer

2001 Jeep GC Laredo - Interior Lights stay on while driving


Sounds like a fuse issue. check your panel for popped accessory fuse.

the overhead light issue may be the door close switch

Feb 17, 2009 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Chrysler Sebring Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...