Question about 2000 Chevrolet Blazer

Open Question

Brake light stays on 2000 blazer - 2000 Chevrolet Blazer

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
airjer995
  • 5332 Answers

SOURCE: on my 2000 S-10 blazer my ABS light stays on

the easiest thing to do is scan the ABS module for codes. The trouble codes will direct you to the wheel/wheels that are giving you the problems. The two common causes for this is bad front wheel bearings or bad front wheel speed sensors. Since the light comes on and stays on after you start the vehicle I would bet there is a speed sensor issue or the wiring in the front wheel wells is corroded. Guessing at what the problem is can be time consuming and costly. Get the trouble codes and go from there.

Posted on Nov 17, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a color code for the brake light wiring diagram for a 2000 s10 blazer


The S10 and the Blazer are identified as two different vehicles. The left stop light wire is YEL; the right is DK GRN. The center high mount stop lamp wire is LT BLU.

Oct 30, 2016 | 2000 Chevrolet Blazer

1 Answer

When we start our 2000 Chevy blazer, if our foot is on the brake when we shut it off the blazer stays running until we let our foot off the brake... What causes this to happen,?


The only thing I can think of is a short in wires. It would be on the back side of the brake switch. That wire has some how come in contact with the ignition run wire. But for that to happen, when you start the car and it is running, the brakes lights in back would be on. Or could be really dim. Are they?

Aug 14, 2015 | Cars & Trucks

1 Answer

2000 Chevy Blazer wiring diagram


I HAVE 2000 BLAZER and the 3rd brake light works but the ones in the tail light do not work have turn signals and new bulbs but no brake light

May 28, 2012 | Chevrolet Chevy Cars & Trucks

1 Answer

The brakes were changed on a 2000 blazer. now the abs light is on. was not on before the brake change


Take it back to the place performed the brake service, or take it to an auto parts store, they usually have a ABS brake scanner to find the problem.

Apr 26, 2011 | 2000 Chevrolet Blazer

1 Answer

Abs light is on and brakes chatter on my 2000 blazer


check abs problem with an Actron Brake Scan tool which sells for about $100. This should help to narrow down the problem to a sensor, a module or other components on the vehicle.

Jun 29, 2010 | 2000 Chevrolet Blazer

1 Answer

I have a 2000 chevy blazer. had to short fix left rear brake line with hose and clamps. bled air from that side, brakes were soft in the pedal. checked right rear for any air had none. brakes still feel...


do not drive the vehicle. remove the hoze. replace it with steel line. rubber hoses are not meant for the high pressures of brake lines. it is expanding when you press the brake pedal. very unsafe.

Mar 23, 2010 | 2000 Chevrolet Blazer

1 Answer

2000 chevy Blazer Emergency brake stuck on. Was


Sounds like a likely possibility, the reverse method definetly did the trick in loosening the brake, but it may still be slightly applied, put it in a warm place when you can, or have a shop look at it indoors, it may need to be re-adjusted, or even just warmed up until the cable frees up again

Dec 11, 2009 | 2000 Chevrolet Blazer

2 Answers

Headlights on blazer


Put the vehicle in park then turn it off, set the parking brake and start it up, release the break and the lights will stay off until you manually turn them on. hope this helps!

Mar 14, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...