Question about 2001 Ford Crown Victoria

1 Answer

Lay down backseat in Crown Vic Police Interceptor

Can't figure out if or how to lay down the backseat

Posted by on

  • Anonymous Mar 31, 2014

    How does it lay down

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 61 Answers

The backseats of this vehicle do not fold down. They are placed on hooks and then they're bolted in on the bottom right and bottom left of the seat.

Posted on Apr 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have p1747 code will that lite up the red light top right corner of my dash on a 2000 crown viv police intercepter


That is a transmission code...

P1747 (EPC Shift Solenoid). Not uncommon for police interceptors...

Here is a discussion of other possible causes:

http://towtalk.net/forum/topic/2000-Crown-Vic-Police-Interceptor-.htm

May 13, 2015 | Cars & Trucks

1 Answer

I got a 2000 crown vic. police interceptor an it came with no alternator, got new one and it came with 3 wires and my wiring in the car has 2 wires,whats with the 3'd wire.


They had a couple different alternators for that car,basically the same alternator but different regulators,might be where your trouble lies

Mar 23, 2013 | Ford Crown Victoria Cars & Trucks

1 Answer

I have two questions 2001 ford Crown Vic LS, Codes read: (p0720 output speed sensor circuit), & (p1131 lack of heated oxygen sensor bank 1 sensor 1 switch indicates lean)........Keep in mined that I...


The PCM is programed for the LS engine parameters and now that you have changed engines the signal from the new engine are out of parameters> Either see if you can get the PCM reprogrammed at a dealership or purchase a new PCM and program the chip with the police engine interceptor to the vehicle> you may also return to the place where you got the engine and purchase the PCM for the police vehicle.

Mar 22, 2012 | 2001 Ford Crown Victoria

6 Answers

I have a 2006 Ford Crown Vic Police Interceptor. I am having a problem with the dash. As I am driving it all the warning lights come on and the speedometer, tach, and odometer all stop working. I have...


Has anyone bothered to scan the IPC (Instrument Panel Cluster) or the GEM (General Electronic Module) to see if there are any fault codes? Does the engine run OK when this happens? I had a Grand Marquis that was doing something similar and the modules had several U-codes. Finally found the problem in the Transmission Range Sensor - it was shorting out the data line.

Dec 02, 2010 | 2006 Ford Crown Victoria

1 Answer

2000 crown vic police interceptor bypass a/c clutch pulley


you can get a A/C Delete kit for a Ford 4.6 liter. the 4.6 v-8 accessory drive system is all the same. You may also be able to run a line of string around the pullys, take it to your local auto parts store and they can match it up. I recomend the kit,

Oct 05, 2009 | 2000 Ford Crown Victoria

1 Answer

99 crown vic police interceptor steering wheel??


i have ran into 2 issues in these vehicles---if it binds while sitting still also, check the steering shaft, i have found the u-joints in the shaft tighten up and binds dangerously tight---if they are free, sounds like you may have a steering box issue or restriction in a line---hope this was helpful!!

Jul 07, 2009 | 1999 Ford Crown Victoria

1 Answer

2005 Crown Vic Police Interceptor: Starts then stalls


Have you checked the fuel filter. Fuel pump will pressure up, but fuel filter could be clogged and not work without the pressure of the fuel pump.

Nov 27, 2008 | 2005 Ford Crown Victoria

Not finding what you are looking for?
2001 Ford Crown Victoria Logo

Related Topics:

591 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

69114 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Ron Lankford

Level 3 Expert

5383 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...