Question about Cars & Trucks

Open Question

How do I replace a shifter cable on Ford 1992 F-150 truck

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 ford freestar. Was running fine. Got in it and will start, I can move the shifter through gears but will not move. Was told everything from whole transmission, sensor or cable. Ideas??


If you feel it click threw the gears on the shifter, the cable is fine. No click, the cable came off or broke. Clicking would be a transmission problem could be several different things. But Ford did have a problem with the servo. You can access it from the bottom. Looks like a cup with 3 bolts mounted to the transmission. I replaced the seals and springs in it.

Nov 30, 2015 | Ford Cars & Trucks

1 Answer

How do you change a shift cable on a 2001 ford windstar


follow it from shifter to gearbox,it probably just clicks into gearbox bracket and snaps over ball on shifter linkage,there many be cable tis or brackets holding the cable in place,will probably bolt to shifter on an adjustable linkage

Oct 16, 2014 | 2001 Ford Windstar

1 Answer

2003 ford focus slips from park to reverse without the car being on or using the push button on the shifter


There is a cable that runs from the shifter to the ignition switch. Either it has broken or someone disconnected it so they wouldn't have to replace a solenoid in the shifter or switch.

Apr 03, 2014 | 2003 Ford Focus

1 Answer

Transmission will not shift into reverse


your shifter cable is bad replace shifter cable.

Mar 01, 2011 | Ford Explorer Cars & Trucks

1 Answer

Sometimes when shifting into passing gear, the car shutters.


your shifter cable is going bad replace shifter cable.

Feb 22, 2011 | 2003 Ford Taurus

1 Answer

I have a 2004 ford explorer xlt the gear shift broke when i went to put it on drive...how is that possible???


hello! will try to assist! you may have a broken shifter cable.when you turn the key to 'on' or 'start' the shifter just moves sloppy,or easily. right? thats a sign of broken shifter cable.i have a 1994 explorer 4x4 there is a shifter cable to your transmission,sometimes they break. the cable will need to be replaced. you can purchase new or used,but if you're going to keep the truck,buy it new. the older fords had a metal linkage to the transmission,without the push button 4x4 option. the new ones have a cable shifter,just another way to get into our pocket book. try this with 2 people [for safety] put your emergency brake on,turn key switch on. have someone,or you,look under the driverside of truck up at the transmission shifter cable to see if it's moving on the side of the transmission.whoevers setting in the drivers seat will have to move the shifter from park to low,with the emergency brake on so the truck does'nt move or their foot on the brake,that works too. just make sure your safe as the truck cannot move while the person's shifting the gears while you look under the truck for shifter movement on the transmission.if no movement on the transmission while the gears are shifted,the cables broken. there,i went through the steps to insure your safety,and to give you a solution. just always be safe when you're under or around a vehicle that you're trying to repair.remember this always!the vehicle can be replaced,you can not! thank you for choosing fixya com and i look forward to assisting you in the future.

Jan 22, 2011 | 1997 Ford Explorer AWD

1 Answer

1998 Ford Explorer 2 door 4-wheel drive. My


You need to remove the trans pan to inspect the parking pawl and rod. Hopefully you can adjust or repair with trans in your vehicle.

Also don't assume your cable etc is okey. You don't know that. You may be able to adjust it and be okey.

Jul 28, 2010 | 1998 Ford Explorer

1 Answer

I unable to put my 1999 Ford explorer into park. Sometimes it will not start unless I put the key into start bring the gear down and up towards park and hold it. Somebody told me it could be a shift...


Hi, you are on the right track with the shifter cable, when the shifter cable goes bad it stretches out and doesnt allow the transmission all the way up into park. these cables arent to hard to replace but do require some moderate interior disassembly. if you do not feel comfortable with this repair you should take it to a repair shop. also the shifter cables can sometimes only be found at the dealer which is a little pricey.

May 22, 2010 | 1999 Ford Explorer

1 Answer

2001 FORD FOCUS SHIFTER CABLE SNAPED


You did not need to remove the heater box to replace the cable. There is a hole in the floor the cable passes through.

Nov 15, 2009 | Ford Focus Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...