Question about Cars & Trucks
Im trying to repair my vehicle. im having problem locating tps on my vehicle
The throttle postion sensor is located on the throttle body on my camry ist behind it so im guessing ist behind the throttle body
Posted on Nov 27, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1996 toyota tercel
there is no repair manual published for the 1996 tercel, not from chilton, not from haynes.
the 1994 tercel and the 1996 corolla are both covered in haynes manuals, that's the closest we can get. both have some of the same systems, gotta pick and choose.
there is an expensive professional repair manual, published by toyota, i think, that's what mechanics buy for shops. it costs hundreds, and is not easy to buy.
Posted on Sep 04, 2008
The cylinder head bolt torque is a 2 step process.
First: Torque all of the bolts to 45 Nm (450 Kgf-cm or 33 ft lbs.)
Replace any head bolt that will not torque to the above specs.
Second: after all ten bolts are torqued to the above specs, the head bolts are then "Torqued to Distance"...
Starting at the center bolts, retorque all ten bolts an additional 90 degrees.
Hope this helps, the graciousness of a FixYa rating would be greatly appreciated.
Posted on Jan 21, 2009
I did a key code search on a 1993 toyota corolla . The key code was located on the passenger front doors lock cylinder (door lock tumbler). You have to disassemble the door panel and remove the lock cylinder from the door to read the tiny numbers on the lever of the lock cylinder..I would recommend calling your local toyota dealer and confirming it is on the lock cylinder before tearing apart the door....You would have to give them the code to get a new key cut. hope this info helps..
Posted on Apr 05, 2009
First you need to release any back pressure by leaving the car off and open the throttle a couple of times. Not too much so you don't flood the engine. Its also a good idea to wear saftey glasses. The filter is located under your hood near the power steering res. Its shiney black and looks more like a air coditioning component. Due to the high pressure situation Toyota didn't take any chances, so you may have to put a lot of muscle into the bottom threaded intake port. Be sure you have good open ended box wrench to hold this with.I found it easier to remove the outlet side first.(top side), then remove the mounting bracket, find a tight fitting open end wrench to turn the filter @ the bottom rather than turning the fitting ( because of tight clearance). Be very careful to replace the brass seal ring/s back in there proper inlet/ outlet lines these are extremely critical for safety. You will find that installation is much easier then removal.This is a very high quality filter(and Expensive). After 300,000 miles I just flushed mine out W/ heptane followed by compressed air and still works like a charm.
Posted on Nov 10, 2009
Tips for a great answer:
May 30, 2016 | 1992 Toyota Tercel
Feb 24, 2011 | 1996 Toyota Tercel
May 31, 2010 | 1994 Toyota Tercel
Jul 14, 2009 | 1996 Toyota Tercel
Jan 21, 2009 | 1996 Toyota Tercel
Nov 24, 2008 | 1995 Toyota Tercel
Oct 09, 2008 | 1995 Toyota Tercel
Jul 05, 2008 | 1995 Toyota Tercel
101 people viewed this question
Usually answered in minutes!