Question about 1990 Isuzu Pickup

Open Question

Need a picture of timing marks on 2.5 isuzu - 1990 Isuzu Pickup

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 202 Answers

SOURCE: timing mark alignment 3.2 dohc isuzu

there should be a dot on either cam shaft and a marking on the belt that line up. http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?chapterTitle=Engine+Mechanical+Components&partName=Engine+Mechanical&pageId=0900c1528002abcd&subChapterTitle=Timing+Belt+Cover%2C+Belt+%26amp%3B+Sprockets&partId=0900c1528002ab6d
hope that helps. one of the easiest cars I've ever timed

Posted on Nov 16, 2009

  • 1757 Answers

SOURCE: isuzu trooper 2002 RLV engine. camshaft timing

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2002/make/isuzu/model/trooper/2002_isuzu_trooper_timing_belt_diagram_marks.htm

Posted on Mar 25, 2010

  • 97 Answers

SOURCE: JUST NEED PICTURE OF TIMING

I have a .pdf file of what you are requesting. Email me at sernst@mazakcorp.com with FIXYA in the subject and I will gladly forward it to you.

Posted on Apr 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 Isuzu Rodeo timing marks for the 3.2 liter single overhead need picture or video of it


google it yet? (its there)
or even search here, in the fixya search, (its there)
been answered many time.s
or login to alldata.com and see it? (its there all the time)

May 26, 2015 | 1997 Isuzu Rodeo

1 Answer

Im looking 4 the timming marks on the cam shaft and watever the gear is to the left o the crankshaft. Its on a 1995 Isuzu Rodeo 4 cyl 2.3 also need to know how to get it back timed


The best answer is to get a shop manual from auto parts store. The alignment is crucial so I would not want to trust someone's memory. You need a good picture.

Dec 15, 2014 | 1995 Isuzu Rodeo

1 Answer

Need to set the timing of the cam and crankshaft


finish all ready for exact timing of crank shaft,becouse have a timing mark. not same camp shaft,no marking for exact timing.you have a picture for exact timing jb1 engene?thanks sir,

Oct 17, 2013 | 1990 Isuzu Pickup

1 Answer

How do I find tdc on #2 cylinder when timing belt breaks


Timng belt installation involves the #1 cylinder, not the #2 cylinder. Below is the picture of the timing marks for the 4 cylinder and the 6 cylinder:



chuckster57_57.gif

chuckster57_58.gif

Oct 17, 2011 | 2000 Isuzu Rodeo

1 Answer

How to timing the belt of isuzu 4jx1



stevenhurc_29.jpgbefore you remove belt time mark on cam gear as well as crankshaft pulley, the timming mark on the pump drive gear (lower gear in this picture) will not line up but thats ok line up the mark on pulley to rear cover at about 12 O clock when the belt is off.

Sep 08, 2011 | 1999 Isuzu Trooper

1 Answer

JUST NEED PICTURE OF TIMING MARKS ON ISUZU 3.2 1997 RODEO


I have a .pdf file of what you are requesting. Email me at sernst@mazakcorp.com with FIXYA in the subject and I will gladly forward it to you.

Apr 24, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

Hi ive got a 1996 isuzu bighorn ive attempted to change the timing belt but the injector pump pulley moved when i took the belt off. i put it back where i thort it was and tried a tooth either way but no...


Timing belt installation

1. Ensure locking bolts located correctly [4] & [5] in the picture below:

tdisline_32.jpg
CS = Crankshaft
CA = Camshaft
IP = Injection Pump

2. Ensure timing marks aligned [10].
3. Fit timing belt in clockwise direction, starting at crankshaft sprocket.

NOTE: "ISUZU" lettering on belt should be readable from front of engine.

4. Slacken tensioner pulley bolt [9]. Push tensioner pulley against belt.
5. Ensure belt is taut between injection pump sprocket and tensioner pulley as well as crankshaft sprocket and camshaft sprocket.
6. Position tensioner lever [8] against tensioner pulley housing.
7. Remove locking bolts from sprockets [4] & [5].
8. Apply a load of 10 ... 12 kg to tensioner lever. Use spring balance [11].
9. Tighten tensioner pulley bolt to 80 Nm.
10. Turn crankshaft slowly 45 degrees anti-clockwise. Use spring balance to tension belt.
11. Repeat tensioning procedure at 45 degrees intervals for one anti-clockwise turn of the crankshaft.

NOTE: DO NOT turn crankshaft clockwise during tensioning procedure!

12. Fit tensioner lever to original position. Tighten nuts [12].
13. Install: Injection Pump flange [6], Camshaft sprocket flange [7], and water pump pulley.
14. Install components in reverse order of removal & refill coolant.

tdisline_33.jpg
PLEASE DO RATE MY RESPONSE. THANKS!

Nov 27, 2010 | 1996 Isuzu Trooper

1 Answer

I have isuzu trooper 1988 am changing the timing belt but i forget mark the timing and now i cant get it start.


Take it to a trained mechanic that works on isuzu's. If you have never put a belt on one of these do not attempt it.The cam pulley turns aver three times to one rotation of the camshafts, no marks.

Oct 23, 2010 | 1988 Isuzu Trooper 2 Door

1 Answer

Isuzu trooper 2002 RLV engine. camshaft timing


Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2002/make/isuzu/model/trooper/2002_isuzu_trooper_timing_belt_diagram_marks.htm

Feb 21, 2009 | 2002 Isuzu Trooper

Not finding what you are looking for?
1990 Isuzu Pickup Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...