Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: car radio harness colour code
work it out with a meter ,,,,find perm 12v feed neg and pos ---yes could be any coloured wire depending on car maker,after finding perm 12v feed for memory look for pos from ign switch,now speaker wires are easy as both will be same colour for a speaker but one will have a band through it if not sure or colour blind like yours truelly then use pos and neg on speaker wire till you hear a thump from speaker then you know you have the right wires and location of speaker ,,ie.. front left back right ect ....Now you are a fully experianced radio fitter ??
Posted on Dec 20, 2008
it should be underneath your car in between the firewall and the engine. Now you don't want to supply direct power to your starter because you'll end up frying it. However to just start the car once you've located the starter, get a long screwdriver with a plastic handle and connect the two wires with the screwdriver.
As for a long term fix, without investing the money to replace the necessary parts. You will need to attach a wire that can handle 12v to both wires on your starter separately. Then connect the other ends of both wires to a switch that can handle 12v, and mount that in your car somewhere. Then whenever you need to start your car just flip the switch on until the car starts then once it is started flip it back off.
I know this sounds like a lot but it is very doable with about $5 and a little bit of time.
Posted on Jan 30, 2009
Remove the shift knob. Starting on the console around the shifter, gently pull up on the "bezel". When it comes off you'll see the radio's held in (with the little storage area) by 4 Phillips screws.
The wiring is hidden behind
Posted on Jul 25, 2009
Car Radio Constant 12v+ Wire: Blue/Yellow
Car Radio Switched 12v+ Wire: Gray
Car Radio Ground Wire: Brown
Car Radio Illumination Wire: Green
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Pink
Left Front Speaker Negative Wire (-): Violet
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Blue
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Black
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Red
Right Rear Speaker Negative Wire (-): White
Posted on Sep 26, 2009
check this web site ,it might help with your question.
http://www.stumbleupon.com/s/#1Pltxs/www.modifiedlife.com/car-stereo-wiring-diagrams-and-car-radio-wiring-diagrams// its free. scroll down to manufacturer. then on rh side of screen find model and year
Posted on Nov 08, 2009
Tips for a great answer:
Aug 31, 2016 | 1986 Nissan 300ZX
Oct 25, 2015 | Nissan Pickup Cars & Trucks
May 23, 2014 | 2007 Nissan Hardbody 3000TD
May 05, 2013 | Cars & Trucks
Feb 16, 2013 | 1989 Nissan Hardbody King
Mar 27, 2017 | 1997 Nissan Maxima
Apr 23, 2012 | Nissan Navara Cars & Trucks
Aug 06, 2010 | 1990 Nissan Hardbody King Cab
Dec 20, 2008 | 1993 Nissan Maxima
Oct 06, 2008 | 1989 Nissan Hardbody King
84 people viewed this question
Usually answered in minutes!