Question about 2005 Kia Picanto

Open Question

How can i find an exploded rear brake diagram for a 2005 Kia Picanto

Rear brake caliper exploded view

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: Rear brake rotor removal

Should just pop right off. Hit it gently with rubber mallet, it might have rusted to the hub

Posted on Dec 19, 2008

Ad
carlsbiz
  • 1124 Answers

SOURCE: how do push in rear caliper

Need a special tool..
Click here to see it -
http://www.ecstuning.com/Search/ES9747/ES9747/?gclid=CPv6yan8lpwCFQiOxwod_WwIsA

Please dont forget to rate well ;o)

Posted on Aug 09, 2009

  • 172 Answers

SOURCE: need to remove the brake drums and need a diagram

auto zone can help you on diagram

Posted on Apr 15, 2010

roniecon
  • 6927 Answers

SOURCE: 2006 Kia Spectra 5 rear brake disc replacement

One side,turns right,and push in slightly,and the other side turns left,to retract.

Posted on Apr 20, 2010

  • 975 Answers

SOURCE: brakes pulsing on a 2005

The pulse is due to thickness variation of the rotors,have to have them machined to even 'em back up.Getting hard to find a shop that will do that,because replacement rotors are so cheap,but it's better to get 'em machined .They will stay true longer

Posted on Nov 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are brake pad measurements for needing new pads front and rear and disc drums for a Kia picanto


max thickness of new pads is 16.5 mm
anything less than 6 mm needs new pads
wont make to the next 10,000 km service


Brake Pad Set disc brake for Kia Picanto


26243056-cozugveoduyoiwucuprdojwx-1-0.jpg

Jul 22, 2016 | 2008 Kia Picanto 1.1

2 Answers

I need a diagram for rear drum brakes on a 2005 kia sedona van


I have Pictures of my Kea Sedona rear brake assembly and drum I can send you, if this helps or tell me what information your after regarding the rear brake assembly.

AHR

Feb 22, 2015 | 2005 Kia Sedona

1 Answer

Rear brakes on 2011 kia sorento


You will likely find there are two bolts holding the calipers on the 2011 Kia Sorento. You can check this by parking your Sorento, setting the parking brake to be sure it won't roll and carefully lifting and removing one of the rear wheels, just like you are removing a flat.

When you remove the wheel, you should find that the brake caliper carrier is accessible on the rear top of the wheel assembly. Simply reach around and carefully feel the carrier assembly and you should feel a couple of bolt heads because two bolts are generally used to hold down Kia rear calipers.

Jan 03, 2015 | 2011 Kia Sorento

1 Answer

WHY kia picanto auto move slowly if put in gear d


clutch slipping could have worn pressure plate or clutch plate. could have oil leaking from rear main oil seal getting on clutch plate causing slipping.

Jun 16, 2013 | 2005 Kia Picanto

2 Answers

Kia picanto rear brake lights will not turn off


Check the brake light switch on the brake pedal. It may need adjusting to allow brake lights to go off. The plunger on the switch needs to open when pedal is depressed, and close when pedal is released and in its normal position.

Feb 25, 2012 | 2005 Kia Picanto 1.1

1 Answer

I have a kia picanto and my brakes feel like it is not releasing properly...I also noted that my petrol consumtion is higher than normal...could any one help me with this problem please? Regards Jacques


sounds like you have a caliper sticking, if you dont have much experience with brakes ,i would take this to a repair shop. your emergency brake could be sticking as well. if it feels like it is pulling to one side when you are braking then it is probably one of the front calipers. which ever way it is pulling would be the caliper to check. if it isnt pulling ,then probably a rear caliper if it has disc brakes in the rear. if you have access to a laser temp probe you could just drive it for a bit and check each rotor for temp, the hotter one will be your problem child.

Dec 10, 2010 | 2007 Kia Sorento LX 4x4

1 Answer

Will I need a caliper reset tool kit to change the brakes on my 2007 toyota sienna or will a standard c-clamp do the job? And since it is an ABS system, I assume that brakes must be bled, correct?


Brake Pads Removal & Installation Front To Remove:
  1. Remove the front wheels. Front brake caliper (exploded view) toyota-09-00-5838.gif

  2. Loosen the caliper bleeder.
  3. Hold the slide pin; remove the 2 mounting bolts and remove the brake caliper from the support.
  4. Support the caliper.
  5. Open the brake bleeder. Press the caliper piston into the bore.
  6. Close the bleeder after the piston has reached the bottom of the caliper bore.
  7. Remove the brake pads, support plates, wear indicators and anti squeal shims.
  8. Remove the slide pins and bushings from the caliper support.
To Install:
  1. Lubricate the slide pins and bushings with brake grease.
  2. Install the bushing on the slide pin.
  3. Install the slide pin on the caliper support.
  4. Install the brake pad support plates on the caliper supports.
  5. Lubricate the anti squeal shims with brake grease.
  6. Install the anti squeal shims on the brake pads.
  7. Install the pad wear indicator facing upward and install the pads on the caliper support.
  8. Install the caliper on the support.
  9. Install the 2 mounting bolts, hold the slide pins and tighten 25 ft-lb (34 Nm).
  10. Fill the reservoir and bleed the brakes.
  11. Install the front wheels.
Rear To Remove:
  1. Remove the rear wheels.
  2. Loosen the caliper bleeder. Rear brake caliper (exploded view) toyota-09-00-5842.gif

  3. Hold the slide pin; remove the 2 mounting bolts and rear brake caliper assembly from the support.
  4. Support the caliper.
  5. Open the brake bleeder. Press the caliper piston into the bore.
  6. Close the bleeder after the piston has reached the bottom of the caliper bore.
  7. Remove the brake pads, support plates, and anti squeal shims.
  8. Remove the slide pins from the caliper support.
To Install:
  1. Lubricate the slide pins with brake grease.
  2. Install the slide pin on the caliper support.
  3. Install the brake pad support plates on the caliper supports.
  4. Lubricate the anti squeal shims with brake grease.
  5. Install the anti squeal shims on the brake pads.
  6. Install the rear pads on the caliper support.
  7. Install the rear caliper on the support.
  8. Install the 2 mounting bolts, hold the slide pins and tighten 25 ft-lb (34 Nm).
  9. Fill the reservoir and bleed the brakes.
  10. Install the front wheels.
prev.gif next.gif

Sep 18, 2010 | 2007 Toyota Sienna

1 Answer

2006 Kia Spectra 5 rear brake disc replacement


One side,turns right,and push in slightly,and the other side turns left,to retract.

Apr 20, 2010 | 2007 Kia Spectra5

1 Answer

Rear brake rotor removal


Should just pop right off. Hit it gently with rubber mallet, it might have rusted to the hub

Oct 03, 2008 | 2005 Kia Amanti

Not finding what you are looking for?
2005 Kia Picanto Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...