Question about Cars & Trucks

Open Question

1988 Chevy S10 ecm b fuse blowing - Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 14036 Answers

SOURCE: the ECM fuse keeps blowing out

check the wiring to fuel tank something shorting. replace wires to fuel tank.

Posted on Apr 09, 2009

Ad
  • 11 Answers

SOURCE: 1988 chevy s10 blazer 4.3, cut out , will srart but will not stay

Your vehicle as an ignition control module located on top of the distributor (under the cap and rotor) I would pull the ICM and take it to NAPA and have it tested if bad replace it (cost about $80). Sounds like a ICM problem or it could be the ignition switch located on the steering coloum which can't be tested but costs $20. Hope this works

Posted on Jul 16, 2009

  • 87 Answers

SOURCE: 1992 chevy s10 no brake lights or turn signals

Check the front and rear (although probably the rear) turn signal bulb socket for corrosion and/or water intrusion. If you find corrosion attempt to clean (but you will probably have to replace the socket and bulb). For water intrusion you will probably have to replace the break lamp assembly.

Posted on Aug 02, 2009

wilsodfarm
  • 986 Answers

SOURCE: blown ecm fuse

unhook the ecm and check if the fuse does not blow,you will know if it is the ecm,Hope this helps

Posted on Sep 06, 2009

rtjohnson55
  • 75 Answers

SOURCE: Clutch fluid weight 1988 chevy s10

in the trans is 80w-90. the clutch fluid is actally the exact same as dot3 brake fluid.

Posted on Dec 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 1988 Chevy s10 4x4 I keep blowing fuses for my turn right side turn signals and brake lights I unhooked all the wires coming from main harness in back and same problem thinking maybe turn sig


May want to also check your wiring from the fuse panel to the different components that are giving you the problem. I think that you may have a pinched wiring along the way to all the components.

Dec 23, 2016 | 1988 Chevrolet S-10

1 Answer

No fuel spray from injectos


1986 chevy s10 2.5l no gas coming from injector. - S-10 Forum

www.s10forum.com/.../1986-chevy-s10-2-5l-no-gas-coming-from-inject...
Sep 2, 2009 - 24 posts - ‎7 authors I have no gas coming from my injector it a 1986 chevy s10 2.5l I have replaced the fuel pump,oil pressure switch & I checked and oil would ...

Oct 12, 2015 | 1988 Chevrolet S-10

1 Answer

1988 chevy S10 pick up 2.8 FI, my ECMB fuse keep


Your ECM may be shorted internally. Have it professionally diagnosed.

Sep 24, 2014 | Cars & Trucks

1 Answer

Wiring diagram 94 chevy s10


ECM b powers the fuel pump relay, the engine computer, and other components.
You could try pulling the pump relay to see if the short is in the fuel pump circuit. Otherwise, you may need a shop manual to find out everything in that circuit.

Sep 03, 2013 | Chevrolet Cars & Trucks

1 Answer

2003 chevy s10 ecm fuse keeps blowing what is the problem


Either the module itself is internally shorted, or the power wire to it off that fuse has a short-bare wire touching metal and blowing the fuse.
You will have to examine your wiring and try to find the short. Has any moisture collected in back of, or around the fuse box? If it is a bad wire, it could be bad anywhere from the battery to the ECM.
You might check with the dealer and see if the ECM can be tested for a short or malfunction, and if it can be done with it off the car or if it needs to be tested with it connected up. You may be able to run a new power wire from it's source to the fuse box and to the ECM. You sure need a wiring diagram for this. good luck.

Jan 23, 2012 | Cars & Trucks

1 Answer

Blown ecm fuse


unhook the ecm and check if the fuse does not blow,you will know if it is the ecm,Hope this helps

Sep 06, 2009 | 1988 Chevrolet S-10

1 Answer

Can a 1988 chevy S10 2.5l ecm be used in a 1987 chevy S10 2.5l


the numbers on the ecm must be the same . you have 2 sets of numbers and the bottom set should be the same.

Jul 15, 2009 | 1987 Chevrolet S-10 Pickup

2 Answers

Ecm fuse keeps blowing out on chevy s10 2001


Jeff Tourcotte, I am experiencing this same problem. I unhooked crank and cam sensor and still blow the fuses. Any chance you can email these diagrams to me seeing I can not get them to open?
Jd.neff2469@gmail.com

Jun 16, 2009 | 2001 Chevrolet Blazer

1 Answer

The ECM fuse keeps blowing out


check the wiring to fuel tank something shorting. replace wires to fuel tank.

Apr 09, 2009 | 1988 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...