Question about 1998 Toyota Sienna

Open Question

Need to know the head bolts torch specs on 93 toyota 4renner

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 701 Answers

SOURCE: torque specs for toyota tercel

Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using6bd0ae1.jpg FixYa. Roger

Posted on Apr 15, 2009

Ad
  • 104 Answers

SOURCE: torque for head bolts for 1984 Toyota Corolla

head bolt toque specs are 40-47 ft-lbs

Posted on Apr 17, 2009

johnjohn2
  • 5763 Answers

SOURCE: need to know the head bolts torch specs on 98

heres the torque specs and the way to tighten the head bolts for your 1998 toyota sienna, hope this helps,
12 point bolts step 1- 40 ft lbs
step 2- additional 90 degrees
recessed bolt 13 ftlbsaf151d2.gif

Posted on May 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota 2c. I need cylinder head and flywheel Torque settings


Toyota 2c ...
USE NEW BOLTS...
Torque sequence:
You're driving a diesel single cylinder head engine. Engine head torque has to be done in specific order and stages if not can warp head or break bolts. Suggest you get torque sequence and torque specs from your Toyota dealer, they can give you correct answer. Don't trust answers on here, if you choose wrong specs. could end up messing up head.


Flywheel - Use a Sealer on bolt, Manual Transmission 88nm/65 ft lb... Auto Transmission 74nm/55 ft lb

Aug 06, 2014 | Cars & Trucks

1 Answer

I need too know the torque specs on head bolts and crankcam 2.4 engine


on a 2002 2.4 engine head bolts are 'torqued to distance'.

First, install all the bolts, and, in a sequential fashion, starting at the innermost, working outward, torque all bolts to 70 N-m/806 kgf-cm/58 foot lbs.

Next, mark the front side of each head bolt with a dot of paint. Retighten the cylinder head bolts 90 degrees, starting at the inner 2, and working outward.I dont thin anything has changed on this engine since then.

Mar 19, 2013 | 2005 Toyota Camry XLE

1 Answer

What are the torch specs for the head bolts on my 1997 2.2 camry


the first stage is 36 foot pounds of torque in the correct tightening sequence. The second stage is turning the bolts 90 degrees tighter.

Jul 19, 2012 | 1997 Toyota Camry

1 Answer

Head core torch spec


Are you asking for the head torque specs? You must have new head bolts to do this, they are what you call "torque to yield" head bolts, they stretch and act like a spring, so they are one time use.. Also need to know which engine you have?

Jul 03, 2012 | 2002 Oldsmobile Alero

1 Answer

Changed heah.need to know how to put timing belt back on.and what is the head bolts tork spec.


Here is the Timing Chain installation procedure: http://www.4shared.com/document/M8reUm2d/1992_Toyota_4Runner_Timing_Cha.html


Head Bolts Installation


Install and tighten the head bolts gradually in three passes in the sequence shown. Torque the bolts on the final pass. Torque: 78N-m (800kgf-cm, 58ft-Ibf)
pctech1_29.jpg

Mar 06, 2011 | 1992 Toyota 4Runner

3 Answers

Need to know the head bolts torch specs on 98 toyota v6


heres the torque specs and the way to tighten the head bolts for your 1998 toyota sienna, hope this helps,
12 point bolts step 1- 40 ft lbs
step 2- additional 90 degrees
recessed bolt 13 ftlbsaf151d2.gif

May 12, 2010 | 1998 Toyota Sienna

2 Answers

Torque specs for toyota tercel


Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using6bd0ae1.jpg FixYa. Roger

Apr 08, 2009 | 1998 Toyota Tercel

2 Answers

Torque for head bolts for 1984 Toyota Corolla


head bolt toque specs are 40-47 ft-lbs

Mar 22, 2009 | 1984 Toyota Corolla

1 Answer

Need to find specks on cylingder head for 1996 toyota tercel


The cylinder head bolt torque is a 2 step process.

First: Torque all of the bolts to 45 Nm (450 Kgf-cm or 33 ft lbs.)
Replace any head bolt that will not torque to the above specs.

Second: after all ten bolts are torqued to the above specs, the head bolts are then "Torqued to Distance"...

Starting at the center bolts, retorque all ten bolts an additional 90 degrees.

Hope this helps, the graciousness of a FixYa rating would be greatly appreciated.

Jan 21, 2009 | 1996 Toyota Tercel

Not finding what you are looking for?
1998 Toyota Sienna Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...