Question about Suzuki Cars & Trucks

Open Question

Suzuki sx4 sat for a year now it is stuck in 3rd and fourth gear. But will not shift left to 1 2 or rigth to 5 reverse running or not

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: automatic transmission sounds like it stuck in 3rd gear

You need to check the transmission fluid level, if it is low the tranny will not shift. If, however, the fluid is to the proper level then you will need a new transmission.
Try putting new fluid in and look for a leak in the pan gasket, then all you may need is a transmission service. When the service is done the mechanic will look for pieces of metal in the old fluid, if found this is very bad and you will need a new tranny.
You might consider a new or used car, you can definately find a good deal out there!

Posted on Nov 16, 2008

  • 634 Answers

SOURCE: my 98 cavalier manual stick shift will not go to reverse gear

sounds like the shifter linkage has worn and not working properly need to lift in air and inspect the linkage

Posted on Jul 08, 2009

GM Elec
  • 1000 Answers

SOURCE: The gear shift gets stuck and won't shift into

Either the shift knob or the actuator rod under the shift knob has worn out.
Remove the shift knob and pull the actuator rod (plastic) out of the shift lever and inspect it for wear or damage. If the rod is not worn or damaged, replace the shift knob and you will be good to go.
Good luck.

Posted on Nov 11, 2009

Testimonial: "Thank you, I think you found problem"

  • 79 Answers

SOURCE: 4l60e no forward or reverse gears operating

It sounds like your torque converter or the pump is broken.

Posted on Jan 10, 2010

  • 1 Answer

SOURCE: 2001 Hyundai Santa Fe - Engine Code P1602, stuck in gear

Im having the same problem with my 02 Santa Fe. How do i go about fixing this problem? And is it costly? Please help

Posted on Jan 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

04 Suzuki sx4 shifter moves in gear but won't move


If this is an automatic then assuming the fluid hasn't leaked out then the transmission has failed and needs repair.

Sep 22, 2016 | Suzuki SX4 Cars & Trucks

1 Answer

I have a 2008 Suzuki sx4 and it squeals shifting between 2nd and 3rd gear, also when it rains the check engine light comes on for a day or 2, please help


the check light means , scan me.
you scan or they scan, (pick one)
ever get tuneup ever (the 60k miles are important) skip those?
my guess is spark goes bad, wet (damp weather)
and sets P030x codes (DTC errors) called misfire.

the squealing is fan belts, also on the 60k list. bad.

Mar 16, 2015 | Suzuki Cars & Trucks

1 Answer

Suzuki Forenza error code P0782


Well code 782 is for a problem with the 2-3 shift solenoid or the circuit back to the engine computer. The solenoid is inside the transmission.
Code 722 was for a problem with the speed sensor. You could have a wiring harness problem.

Jan 22, 2014 | 2004 Suzuki Forenza

1 Answer

P732, p1529, transfer


code P0732 - gear 2 incorrect ratio possible cause solenoid or related pressure switch is damaged or failed. problem related to the input speed or output speed sensor.low reverse clutch is damaged leaking or failed.faulty valve body. transmission fluid level incorrect or level is too low. code P1529 -

Sep 22, 2013 | 2003 Hyundai Santa Fe

2 Answers

2005 chevy silverado no 2nd gear


Is it automatic...?
If so. Stuck valve. It's kind major issue.

Mai

Mar 12, 2013 | Cars & Trucks

1 Answer

01 mazda protege. 2.0L, 5 speed manual. Stuck in third gear. First and second gear are frozen? Can shift into first and second but non responsive just kills the engine when I release the clutch. 3rd 4th...


My friend, it definitely NOT a synchronizer. Those are on the tranny shafts are brass with same teeth as the gear they're on, and are sloped to slow each gear to a stop when shifting into each gear, so rule that out. Think about it, if its stuck in 3rd, but you can still move the shifter to the other positions, then most likely it is only the shift fork on 3rd gear has somehow slipped out of its connection to the shifter rail or it's the connection is broken off. Since the shifter is on top of the trans, you can remove the console and covers to see if the shifter and cover is removable without pulling the trans to see what has gone wrong. Otherwise, you will have to pull the trans to fix that situation. Don't sweat it my friend, it could be something simple. Best of luck with the DIY friend, and may your new arrival be what you wanted. A healthy new baby.

Mar 30, 2017 | Cars & Trucks

1 Answer

I lost 5th and reverse shift in my 91 samurai. I pulled the trans and found that the arm where the shifter goes into 5th and reverse is sticking in the up position, instead of dropping back down. I have...


You know the thing is 20, 10 years beyond its service life. Something has lasted twice its projected life and you are disgusted? Find a used transmission with much lower mileage and install it, obviously you have the skills to R&R, or find a rebuild kit and rebuild the transmission. It may be cheaper in the long run to scrap it and find another vehicle.

Jun 28, 2011 | 1991 Suzuki Samurai

1 Answer

Stick shift


Hi:
The shift pattern is pretty much the same on all 5 speed cars. The top row is the odd numbers, 1-3-5
the bottom row is 2-4-Reverse. The center position is neutral

Here is the key: The shifter is slightly spring-loaded to the center position. If you hold in the clutch pedal and pull the shifter to neutral, and let go of it, it will automatically be lined up in the position, that if you pushed it forward , it would go to 3rd gear, and if you pulled it back, it would go into 4th gear.
This way, to start driving, you start out in neutral, grab the shifter lightly, and push it first to the left, then forward. This is first gear, where you start out. when you want to shift to second, push in the clutch, and keeping left pressure on the shifter, pull all the way back . Here is the easy part, 2nd to 3rd. When you are ready, push in the clutch, and just push the gear shift forward , till it hits neutral, and is spring loaded to the middle. Then you just push it straight forward to 3rd, then next shift, straight back to 4th.
Last gear, 5th: push forward to the neutral row, then Push to the right till it lines up ,and forward to the 5th gear. Reverse should only be shifted into from a dead stop. Find neutral, push the shifter all the way right, then pull back towards you. Hope this helps.
Practice a bunch in the driveway!

Apr 21, 2010 | 2001 Hyundai Elantra

1 Answer

4l60e no forward or reverse gears operating


It sounds like your torque converter or the pump is broken.

Jan 12, 2009 | 1993 GMC Sierra K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...