Question about 2000 Honda Accord

1 Answer

Shield hi how are you...i have a 2000 honda accord v6 coupe and i just installed a cold air intake...the front bumper acts as a shield so the intake doesnt get water on it, however, there is a plastic that connects to the front bumper and the fender and its layed out in the wheel compartment and mine was torn so i completely took it off...if you have no idea what i am talking about, i included a picture of what it is...the arrow is pointing to the black plastic shield that i need. Please let me know, i dont want my intake to take in any water. my email is reydeboricuaz1@yahoo.com...thanks so much

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 145 Answers

IT IS CALLED THE LT FRNT INNER FENDER LINER. BEST PLACE TO BUY NEW IS DIRECT FROM DEALER. FOR BEST FIT AND APPEARANCE

Posted on Feb 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to remove a bumper off a ford puma


How to Remove a front bumper off a ford puma

Removal
1. Remove the radiator grille.
2. Remove the left-hand front wheel.
3. Detach the fender splash shield from the bumper cover and fender (both sides).
4. Remove the air cleaner intake pipe retaining clip.
5. Detach the air cleaner intake pipe from the air cleaner housing.

1 Rotate the pipe clockwise.

2 Detach the pipe.
6. Detach the bumper cover from the fender and support bracket (both sides).
7. Remove the left-hand side bumper retaining nut.
8. Remove the right-hand side bumper retaining nut.
9. Remove the bumper.

Installation
1. To install, reverse the removal procedure.

on Jan 31, 2010 | Ford Focus Cars & Trucks

1 Answer

Where is my oil filter located on my 2000 Honda Accord V6


behind the passenger front wheel right above the sub frame and slightly behind the splash shield.

Oct 17, 2010 | 2000 Honda Accord

1 Answer

Can you help me dis-assemble my front bumper honda odyssey 1999 ?


Front
  1. Note the radio security code, then disconnect the negative battery cable.
  2. Remove the bolt from the lower part of the bumper just in front of the wheel opening, and remove the self-tapping screw from the rear most portion of the bumper at the forward portion of the front wheel well.
  3. On V6 Odyssey models, perform the following:
    • Remove the grille.
    • Remove the pins and clips from the lower front of the bumper.
  4. On 4-cylinder Odyssey models, remove the bolts from the left and right side lower brackets for the bumper at the ends of the lower air intake.
  5. Pull the ends of the bumper outward.
  6. Have an assistant help guide the bumper up and away from the vehicle.
  7. Installation is the reverse of the removal procedure.

Mar 06, 2010 | Honda Odyssey Cars & Trucks

1 Answer

How do you take bumper off a ford puma?


Front Bumper (434230)

Removal
1. Remove the radiator grille.
2. Remove the left-hand front wheel.
3. Detach the fender splash shield from the bumper cover and fender (both sides).
4. Remove the air cleaner intake pipe retaining clip.
5. Detach the air cleaner intake pipe from the air cleaner housing.

1 Rotate the pipe clockwise.

2 Detach the pipe.
6. Detach the bumper cover from the fender and support bracket (both sides).
7. Remove the left-hand side bumper retaining nut.
8. Remove the right-hand side bumper retaining nut.
9. Remove the bumper.

Installation
1. To install, reverse the removal procedure.

Jan 01, 2010 | 2007 Ford F

1 Answer

I have a 1999 Honda Accord V6 and cant find trans fill point


Just the very top ring of the transmission dipstick is visible with the air filter housing lifted up. Removing the upper air filter housing and the rubber ducting for the intake will allow enough room for a transmission funnel to be used.


83611e2.gif

Aug 27, 2009 | 1999 Honda Accord

3 Answers

2005 Honda Accord Front Bumper cover replacement


easy there is a screw on both sides were bumper and fender meet just pop back fender liner its a phillips head. Then pop hood remove clips on black trim infont of radiator. Underside where bumper goes under car remove those clips and 10mm bolts after all is removed bumper just pulls off ...... may have to give it a hard **** a few times but it will come off. Should only take 15-20min to remove if its your first time

Jun 11, 2009 | 2005 Honda Accord

1 Answer

Need to remove bumper of 2000 Honda Accord Coupe


i think there just bulbs unless u have damage and your replacing .i have a 98 also owned 92,94 i just started removing bolts attached to bumper but putting on a little tougher start one top center bolt then do the one on each sidein wheel wells to fit it in there ask someone to help hold while your bolting then do rest of bolts wamo bamo....

Mar 14, 2009 | 1998 Honda Accord

Not finding what you are looking for?
2000 Honda Accord Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...