Question about Cars & Trucks

Open Question

Nissan xterra 2006 c1145

Abs light on, vdc off ang slip

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 140 Answers

SOURCE: I have a 2005 Nissan

The heavy draw on the charging system may have put it in a low voltage condition which will trigger results like that. Double check your battery connections and you may want to have the battery tested. It might be wearing out. Good luck. Please rate me so I know if I helped.Thanks.

Posted on Dec 30, 2008

  • 5 Answers

SOURCE: Nissan 2006 navara 4x4 does not engage and AB warning light stea

check your ABS sensors.... sometimes they can get dirty and not read the wheel right.... that might fix you ABS solution.... and possibly your 4x4 it doesnt want to engage in 4 wheel cause of the abs

Posted on May 06, 2009

  • 236 Answers

SOURCE: I have a 2006 Nissan Xterra. My Trailer running

could be a seperate bulb than the running lights

Posted on Jun 17, 2009

  • 10 Answers

SOURCE: 2005 Pathfinder - all warning lights on

was toll before disconnect the battery for five seconds and it will clear all the lights codes

Posted on Jul 09, 2009

  • 43 Answers

SOURCE: 350z speedometer stuck at 0 with VDC.TCS/ABS/Slip lights on

check the cable which leads from the tranny to the dash, most of the time the cable or sensor went bad

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a Nissan Maxima 2007 last night my car stalled then the VDC off then slip light came on why did this happen and can I still safely drive my car.


NO, its NOT SAFE TO DRIVE. Your car may loose power in the middle of the intersection and then what? VDC and Slip light may be related to ABS system, please have it check.

Apr 23, 2017 | Nissan Cars & Trucks

1 Answer

2007 xterra had trans rebuilt VDC light on constant and slip will come on and the go off no codes sowing or ABS?


I know this VDC is commonly due to a steering angle sensor.
You need to use an ABS scan tool and check for the following codes.
C1143 (steering angle sensor circuit)
C1144 (steering angle sensor signal)
C1156 (steering angle sensor com cir)
C1163 (steering angle sensor safe)

Dec 28, 2016 | Cars & Trucks

1 Answer

Replaced wheel bearing and speed sensor on RF, 2000 f350 diesel dually. Drove 1 month about 1000 miles, now I get c1145 and c1230 with abs light. Any ideas?


ABS code C1145 - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > 1997 - 2003 F150
Aug 20, 2009 - ABS code C1145 1997 - 2003 F150. ... C1220 Yellow ABS WarningIndicator Failure (2) C1222 Wheel Speed ... C1230 Rear ABS Sensor (Electrical/Static) (2) ... ABS light on (Anti Lock Brakes) and I hear pump when in turn ...
Oct 9, 2010
ABS code C1206-2003 F150 SuperCrew
Aug 13, 2007
ABS light C1230
Oct 22, 2006
ABS light on DTC's C1229,C1230
Nov 18, 2002
More results from www.ford-trucks.com

Nov 17, 2015 | Cars & Trucks

1 Answer

How to reset vdc sensor on 2006 nissan pathfinder?


Is VDC switch turned on? If not check brake fluid level

Aug 07, 2014 | 2006 Nissan Pathfinder

2 Answers

Abs vdc and slip light


I think a trip to the nissan dealer may be needed. The Slip and VDC sytem is tied into the anti-lock brake system. Could be as simple as a vacuum leak or a bad check valve at the brake booster, or the ABS system could be malfunctioning.

OBD2Guide com Technical service for OBD2 auto scan tools

Feb 21, 2014 | Cars & Trucks

1 Answer

No solution yet


VDC/ OFF light is still ON only ? or also SLIP + VDC/OFF ?

if VDC/OFF only u must check ur brake fluid status if both VDC and SLIP u still have problems with ur ABS module and steering wheel


Jun 15, 2009 | 2008 Nissan Xterra

2 Answers

Xmission, Cruise Control, Electrical Problem


the vdc off can result because the steering input sensor needs to be re calibrated with the nissan consult2 .
the vehicle dynamic control uses input from the abs,vehicle speed sensor,air bag sensor,yaw sensor and steering angle input sensor.

May 27, 2009 | 2005 Nissan Xterra

1 Answer

I have a 2005 Nissan Xterra Off Road edition with 45000 miles. I gave a friend a jump start. After the succesful jump start I had warning indicator lights for my VDC, ABS, and SLIP on my dash??? What...


The heavy draw on the charging system may have put it in a low voltage condition which will trigger results like that. Double check your battery connections and you may want to have the battery tested. It might be wearing out. Good luck. Please rate me so I know if I helped.Thanks.

Dec 30, 2008 | Nissan Xterra Cars & Trucks

1 Answer

2005 Pathfinder - all warning lights on


was toll before disconnect the battery for five seconds and it will clear all the lights codes

Dec 16, 2008 | 2005 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...