Question about Cars & Trucks

Open Question

Ford Cologne SOHC 4.0L v6 misfire - Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Handy Mike
  • 6 Answers

SOURCE: how do i replace the pcv valve on a 2000 explorer xlt v6 sohc?

On the passenger side of the intake manifold, coming off the bottom about the center of the engine front to back, you'll feel a hose that comes off a nipple. That hose makes a 90 degree bend and goes around to the rear of the motor. Where that hose meets the Y-connector from the other side of the intake you'll find the PCV valve. It's almost impossible to see it with the hood installed, and even tougher to reach it.

A good source of information for Ford Explorers can be found here

Posted on Oct 25, 2008

Ad
  • 4102 Answers

SOURCE: 1998 ford 4.0 sohc v6 explorer sport 4wd. 148000

hi, as far as i can remember its impossible to do the work without removing the whole lot as you just have not got enough room to get the tools in to get the job done, you could contact your nearest main dealers technical department but im pretty sure that the last one we did here we had to take the whole lot out as we could not get the tools in as their just isnt enough room they build these engine big enough to fill the engine bay leaving you no room to carry out these type of repairs so taking the engine out is the only way your going to get this work carried out.

Let me know how you get on or if you need further assistance ok.

Make sure you purchase a workshop manual as this will give you all the correct settings your going to need ok

Posted on Feb 01, 2010

  • 480 Answers

SOURCE: I have a 1994 ford explorer sport, im trying to

if the moter says sohc on the valve cover that means the cam is in the head but most ford V6 motors have the cam in the block making it have pushrods.

Posted on Dec 12, 2010

Testimonial: "Thank you much. very helpful "

saa_aa
  • 241 Answers

SOURCE: require workshop manual for ford explorer xlt 2000 4lt sohc

make sure your fuel pump is OK first , and let me know .

Posted on Nov 18, 2011

  • 5316 Answers

SOURCE: 2005 ford courier v6 sohc 4.0lt timing chain set up

Register for free at autozone.com, giving your make, year, and engine size.

They will have the diagrams for your ford, and quite a bit of repair information and procedures. Good luck.

Posted on May 23, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the power of engine ford aerostar 1992


The '92 Ford Aerostar wasn't exactly a monster under the hood. The entry-level engine was a 145-horsepower Vulcan V6. Buyers could upgrade to the 155-horsepower Cologne V6, which delivered 230 lb.-ft. of torque. The upside of this moderate power was impressive fuel efficiency, especially for a midsize minivan with a curb weight around 3400 pounds: the Aerostar rated at 17 mpg city, 23 mpg highway.

Aug 20, 2017 | Ford Cars & Trucks

1 Answer

I'll pan torque spec on 2002 rord ranger 4.0 sohc


SOHC V6 Torque Specifications - Ford Explorer and Ranger Forums ...

https://www.explorerforum.com/forums/showthread.php?t=406687
Apr 25, 2014 - SOHC V6 Torque Specifications Under the Hood. ... related to the Ford SOHC V6 4.0L engine used in Explorers, Mountaineers, Mustangs and Rangers. .... Oilpan (sheet metal) to crankcase reinforcement section bolts: 80 lb-in (E/MWM) ....Ranger Mountaineer - Sport thru '03 - 2nd Generation, 2002 - 2005 ... Transmission pan drop
5 posts
May 7, 2012
SOHC V6 Timing Chain Inspection & Repair
19 posts
Aug 10, 2010
Another transmission won't go after fluid change
19 posts
Mar 14, 2009
Help with 4.0 SOHC timing
15 posts
Mar 12, 2006
More results from www.explorerforum.com

[PDF]SPECIFICATIONS > TORQUE SPECIFICATIONS

www.askatech.com/askatechlive/forums/resourcehandler.ashx?a=5581
Jan 6, 2014 - TORQUE SPECIFICATIONS ... ENGINE - 4.0L SOHC. 2002 FordExplorer Sport Trac 4.0L Eng. (1). (2) ... Oil Pan Ladder Frame Bolts (Inside).

Torque Specifications - AutoZone


Jan 04, 2016 | Cars & Trucks

1 Answer

Why does my 1992 Ford Explorer idle too fast?


Idle adjustment procedure - Ford Explorer and Ranger Forums ...

www.explorerforum.com > ... > Under the Hood
Mar 25, 2015 - 19 posts - ‎11 authors Idle adjustment procedure Under the Hood. ... Below are the stock idle speeds (RPM) for my 2000 SOHC V6 with strategy CDE4. ..... when you apply the throttle or it could be too much base timing causing a huge misfire. High Idle Blues 1994 4.0
19 posts
Dec 8, 2009
HIGH IDLE in Park!!!
7 posts
Nov 28, 2003
High idle in park 1,500rpm and 900rpm stopped in drive ...
10 posts
Nov 12, 2003
High Idle Problem .. 95, 4.0L, OHV
19 posts
Apr 30, 2003
More results from www.explorerforum.com

Nov 02, 2015 | Ford Cars & Trucks

1 Answer

I bought a motor out of a 2003 ford explorer will it interchange with my 2004 ford explorer


The 3rd generation (2002 - 2005): The Engines were 4.0L Cologne V6 and 4.6L 16-valve Modular V8.

Sep 22, 2015 | Ford Cars & Trucks

1 Answer

I have a 1994 ford explorer sport, im trying to figure out whether or not its a 4.0L pushrod v6 or a 4.0L sohc v6


if the moter says sohc on the valve cover that means the cam is in the head but most ford V6 motors have the cam in the block making it have pushrods.

Dec 12, 2010 | 1994 Ford Explorer Limited

2 Answers

Firing order diagram for 1999 F150 5.4 l engine


1999 Ford F 150 Pickup 5.4 liter V-8 Prop SOHC VIN "Z"
and
1999 Ford F 150 Pickup 5.4 liter SOHC V-8 VIN "L"

e9208fe.gif


1999 Ford F 150 Pickup 5.4 liter SOHC V-8 VIN "3"

db1422a.gif


Hope helps (remember rated and comment this).

Aug 16, 2010 | 1999 Ford F150 Regular Cab

1 Answer

1999 ford explorer misfire in cylninder 6 code


you might try changing the engine coolant temp sensor. could also have defective spark plugs. check the fuel filter, lines and pump.

Apr 09, 2009 | 1999 Ford Explorer

1 Answer

Ford Capri 2.8 V6 Cologne, possible fuel starvation


to check fuel line pressure you would need a pressure gauge screwed into the fuel line.

Mar 16, 2009 | 1978 Ford Granada

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...