Question about Cars & Trucks

Open Question

Bypass heater core dodge caravan - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 43 Answers

SOURCE: heater core

18901fc.gifHere is an exploded view of the heating/air conditioning blower box. This contraption is located on the passengerside under the dash. I've changed heater cores on other cars but never worked on a caravan so not sure how difficult it'll be. You may need to remove a few cover panels to access this and the heater core #22 is located behind the distribution box #6 containing parts 7-18 and hopefully comes off as a unit. I wouldn't want to put it back together just looking at the pic. You may just need to remove the heater tube cover #4 to access the connections and slide out the core.....NAH couldn't be that simple!!! Hope this was of some help. Good luck.













Posted on Oct 23, 2008

LEFTY64
  • 69 Answers

SOURCE: Need to replace the heater core in a 1995 Dodge Grand Caravan SE

1991-95 Models

  1. Disable the air bag system by disconnecting the negative battery cable.
  2. Have the system discharged by a qualified professional mechanic using an approved recovery/recycling machine.
  3. Drain the cooling system.
  4. Remove the steering column cover and left and right side under panel silencers.
  5. Remove the center bezel by unclipping it from the instrument panel.
  6. Remove the accessory switch carrier and the heater/air conditioning control head.
  7. Remove storage bin and lower right instrument panel.
  8. Disconnect the blower motor lead under the right side of the instrument panel.
  9. Remove the right side 40-way connector wiring bracket.
  10. Remove the lower right reinforcement, body computer bracket and mid-to-lower reinforcement as an assembly.
  11. Disconnect the vacuum lines at the brake booster and water valve.
  12. Clamp off the heater hoses near the heater core and remove the hoses from the core tubes. Plug the hose ends and the core tubes to prevent spillage of coolant.
  13. If equipped with air conditioning, remove the H-valve and condensation tube.
  14. Disconnect the temperature control cable and vacuum harness at the connection at the top of the unit.
  15. Remove the retaining nuts from the package mounting studs at the firewall. Disconnect the hanger strap from the package and rotate it aside.

To install:
  1. Remove the temperature control door from the unit and clean the unit out with solvent. Lubricate the lower pivot rod and its well and install. Wrap the heater core and/or evaporator with foam tape and place in position. Secure with the screws.
  2. Assemble the unit, making sure all vacuum tubes are properly routed.
  3. Install the assembly to the vehicle and connect the vacuum harness. Install the nuts to the firewall and install the condensation tube. Fold the carpeting back into position.
  4. Connect the hanger strap from the package and rotate it aside. Install the 2 brackets supporting the lower edge of the heater housing. Connect the blower motor wiring, resistor wiring and the temperature control cable.
  5. Install the retaining screws from the right side to the steering column. Install the instrument panel trim covering and reinforcement.
  6. Assemble the unit, making sure all vacuum tubes are properly routed.
  7. Install the assembly to the vehicle and connect the vacuum harness. Install the nuts to the firewall and install the condensation tube. Fold the carpeting back into position.
  8. Connect the hanger strap from the package and rotate it aside. Connect the blower motor wiring and temperature control cable.
  9. Install the lower right reinforcement, body computer bracket and mid-to-lower reinforcement as an assembly.
  10. Install the right side 40-way connector wiring bracket.
  11. Install the lower right instrument panel and storage bin.
  12. Install the heater/air conditioning control head and accessory switch carrier.
  13. Install the center bezel to the instrument panel.
  14. Install the under panel silencers and steering column cover.
  15. Install the vacuum lines at the brake booster and water valve.
  16. Connect the heater hoses to the core tubes.
  17. Using new gaskets, install the H-valve and connect the refrigerant lines. Install the condensation tube.
  18. Have the system evacuated and recharged by a qualified professional mechanic, utilizing the proper equipment. Add 2 fl. oz. (59 ml) of refrigerant oil during the recharge. Fill the cooling system.
  19. Perform the Air Bag System Check procedures outlined in this section before connecting the negative battery cable.
  20. Connect the negative battery cable and check the entire climate control system for proper operation and leaks.

Posted on Apr 08, 2009

  • 323 Answers

SOURCE: 1999 dodge durango heater core

It's a big job. Drain the coolant down, recover the freon in the ac system and disconnect the lines and heater hoses. Lower the steering column, remove the instrument panel assembly, remove the heater housing. Split the case halves on the housing and there you are. Usually around 500 to 700 dollars at a dealership.

Posted on May 29, 2009

  • 149 Answers

SOURCE: how do i access the front heater core of a 2004

Remove neg batt cable. Drain the cooling system. Remove radiator cap, set heater control to max heat. Drain coolant through valve on bottom rad of the radiator. 12 qt bucket. Pull the carpet out of the way on the driver side floor. Remove the bolts to the steering shaft coupler cover. Remove brake light switch from bracket. Diconnect the power brake booster pushrod. Place towels underneath around area for fluid drippings. Remove retaining clips from HC fittings. Pull the tube out of the HC & carefully rotate them out of the way, plug the open tubes for less mess. Remove the HC bracket bolts, then remove the braket. Push the brake pedal down , the gas pedal up & move the shaft cover out of the way. Pull the HC out of the heat/ac hopusing unit...

Posted on Jan 19, 2010

  • 149 Answers

SOURCE: how to install a heater core on a 2005 dodge grand

Very easy if you go through the lower part near the peddles

Posted on Jan 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 dodge caravan 3.3L its blowing cold air no heat at all .


you have a clogged heater core and needs to be replaced, this van has only one heater core am i right? check the thermostat too but i think is the heater core

Sep 20, 2014 | 2007 Dodge Caravan

1 Answer

Replace heater core 2004 dodge grande caravan. Having problems pulling the dash back


where is the heater core located on a 2004 dodge grand caravan? Is it on the drivers side or passenger side?

Sep 25, 2011 | 2004 Dodge Grand Caravan

2 Answers

99 grand caravan ..carpet is soaking wet on passenger side and in to the rear on the passenger side. I bypassed the heater core on the drivers side but still continues to leak water and antifreeze. Is...


Under the hood is a drain for the cowling under the wiper arms. There is a plastic tube that gets clogged and water can't drain from that area. It is against the firewall on the passenger side. I found mine full of pine needles

Aug 28, 2011 | 2001 Dodge Grand Caravan

2 Answers

Have to what seems to be a radiator leek on passenger side right in front of rear tire. I looked underneath and saw rubber "coolant" lines right above the spring? My question is: is this part of...


Hi, this is the heater core for your rear heater. If it's leaking from inside the box, it's likely the core is bad. Please let me know if you would like instructions for replacing the rear heater core. A new core is $92 at autozone, but I would shop around. Make sure you specify the rear or auxiliary when ordering a new new core, as the front core is different.

May 28, 2011 | 2000 Dodge Caravan

1 Answer

There is no heat in the rear, im thinking its a problem with the back heating core. I have a Dodge Caravan 2001. Whats wrong and how can i fix it?


There should be a vacuum control switch in the heater line going to the heater core that may not be working.
it shuts the water off to the heater core and when heater is turned on the vacuum switch opens the door inside of switch to allow the water to go to the heater core.

May 19, 2011 | 2001 Dodge Caravan

1 Answer

The heater is blowing cold air


heater control valve not allowing radiator water to flow through the heater core where the heater blower motor blows the heat that radiates off the heater core into the vehicle cheap fix or you can bypass yourself by replacing valve with piece of 3/4 copper pipe and 2 hose clamps

Jan 03, 2011 | 1998 Dodge Caravan

1 Answer

How difficult is it to replace a heater core? my 96 grand Caravan blew the heater core. I have just put a couple of thousand into other repairs and I either have to do this job myself, or bypass the...


It's a big job but nothing especially difficult (several hours at least). Recommend you buy or borrow (library?) a repair manual that has the procedure in it.

Sep 04, 2010 | 1996 Dodge Caravan

2 Answers

How to install a heater core on a 2005 dodge grand caravan


Very easy if you go through the lower part near the peddles

Dec 24, 2009 | 2005 Dodge Caravan

1 Answer

I have a 2000 dodge caravan, no heat


Sounds like the air "blend" door might be inoperable. This door opens and closes a specified amount to regulate the amount of either cooled or heated air, as requested by the climate control unit. If the door is continually in the position which is bypassing the heater core (cold setting), the air will not get warm regardless of the condition/operation of the heater core. I'd suggest having this component checked.

Nov 27, 2008 | 2000 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...