Question about 2000 Dodge Caravan
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
lower down the glove box it is behind it with 4 wires.i do these all the time buy a dealers because after market will not last.thank you for your question .
Posted on Jan 30, 2009
the resistor is behind your glove box. open the box and push in the sides to release it and let it hang down...the resistor is right there. I didn't try to replace it, a friend did it, but the part was under $20.
Posted on Feb 01, 2009
it's the blower motor resistor , it's behind the glove compartment, just make sure you disconect the neg. for battery first, open the glove comp. and pull the rubber stops towars the center so you can let the glove comp. hang all the way to the floor , the resistor it's in front of you, disconect the two conectors there's one big with 6 0r 8 wires coming out and another with only two, take them out by pressing on the side of each one, remove it , put the new one on , conect the battery and your done. it's about $ 13.00 at o'riellys auto parts .
I hope this fix yor problem.
Posted on Mar 31, 2009
Removal & Installation
CAUTION The Supplemental Inflatable Restraint (SIR) system must be disarmed before removing the blower motor assembly. Failure to do so may cause accidental deployment of the air bag, resulting in unnecessary SIR system repairs and/or personal injury.
The blower motor is located behind the glovebox, behind the blower motor cover
Once the cover is removed, unplug the electrical connector and push it through the opening in the housing
The blower motor is secured to the housing with three small screws
Posted on Oct 12, 2009
Remove the cover plate on the passenger side of the heater box, 3-4 screws.
Unplug the motor assembly, remove 3-4 more screws that hold the motor in place and pull it down from its position. Get an aftermarket motor and installed it in the original housing with the original squirrel cage.
Installation is the reverse of removal.
Posted on Nov 23, 2009
Tips for a great answer:
Jul 25, 2016 | 2010 Dodge Grand Caravan
May 23, 2014 | 2010 Dodge Grand Caravan
Apr 10, 2013 | Cars & Trucks
Nov 01, 2012 | 2010 Dodge Grand Caravan
Aug 28, 2011 | 1996 Chrysler Town & Country
Jun 17, 2010 | 1996 Dodge Grand Caravan
May 17, 2010 | 2001 Dodge Grand Caravan
Nov 22, 2009 | 2004 Dodge Grand Caravan
Jun 16, 2009 | 2005 Dodge Caravan
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: