Question about Subaru Cars & Trucks

Open Question

2006 subaru legacy cylinder head torque - Subaru Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

MrSocket
  • 117 Answers

SOURCE: tighteneing torques settings for a subaru ej25

Your public library will have a manual covering your mechanical repair. Moreover, they have the automotive shops online software called AllData. It is the best auto technician database available today. You can print out specific troubleshooting procedures, diagrams, step-by-step istructions, and soforth. The typical person cannot afford to pay for this service, just automotive dealerships, etc... that is why the public library made it available to everyone and for free to view and print out material. This should Fixya! Good Luck!

Posted on Aug 28, 2009

inspectmycar
  • 233 Answers

SOURCE: 94 mazda B3000 3.0L cylinder head torque specs

Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below
aca9f77.gif

Posted on Sep 17, 2009

alicantecoli
  • 22095 Answers

SOURCE: what are the cylinder head bolt torque wrench

allky head and block?? between 70/80 lbs

Posted on Nov 10, 2009

  • 1 Answer

SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2

Posted on Jan 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 subaru outback, missfire code - cylinders 1 and 3. Could it be coil or plugs and wires I'm told at service shop. Anybody come across this?


had miss fires with my 92 legacy gt.typical suby fault coil packs always go out in saying that check that you dont just have a foul or failed spark plug. easy fix if it is the coil i replaced mine with 2nd hand ones from the same model usualy find them at most subaru specialists wreckers etc depending on model.

Sep 17, 2013 | 1996 Subaru Legacy

1 Answer

Torque specs 1995 subaru


Did you want the torque converter mounting bolt torque? If so, it is 17 to 19 foot pounds.

May 08, 2010 | 1995 Subaru Legacy

1 Answer

1990 subaru legacy 2.2ltr auto with 189 kms. car heats up and pushes water out from reserve tank.no heat inside.new thermostat and water pump.no water visible in the engine oil and runs smooth.engine...


could be a crack in the cylinder wall on the low side, causing the compression to push the water out and not mix with the oil as its not leaking between oilway and waterway.

head gaskets are a weakpoint on the 2.2 and 2.5 as they are bored out to reach this capacity and this leaves less area for the gasket to bite down on around the cylinders. Fit a WRK steel gasket and get the heads torqued down properly, its a nasty job from an access point of view tho

Jan 12, 2010 | 1990 Subaru Legacy

1 Answer

91 2.0 subaru legacy, needs head gasket and timing blet replacement. how do i repair?


If you're not a very experienced mechanic, take the car to one. You're going to be pulling off the cylinder head, which requires a LOT of teardown just to get to that point. The way you set up the engine before disassembling even the first bolt is critical, and there are about a hundred little tricks and techniques you're going to need to know before you do such a job.

Here's a photo of my wife's car from this past weekend (copy and paste into your browser) - I replaced the head gasket on her Honda Civic. This was several hours' worth of teardown and cleaning in preparation for installing the new gasket (the new head gasket is in the picture, lying flat with the four large holes for the pistons):

http://farm3.static.flickr.com/2785/4109568522_d7c707bd30_m.jpg

There are specific two-step torque sequences and patterns for reinstalling the head that are crucial to do properly or it'll never seal. I'm sure the information on how to do it, step by step, but if you're going to tackle the job, you'll need a lot of time, an extensive tool set, step by step instructions and torque specs for many of the subassemblies, quite a few new parts (head gasket, head bolts/studs, manifold gaskets, timing belt, timing tensioner, accessory belts, water pump, thermostat, all fluids (since they'll be drained before starting), etc etc etc). It's a huge job and one that is easy to screw up, and on a teardown of this level, one mistake can be all you need to destroy the engine.

Nov 18, 2009 | 1990 Subaru Legacy

2 Answers

Where are the spark plugs in subaru legacy gt 2005?


Subaru's are horizontally opposed engines. This means that the cylinder heads are actually pointed out toward the wheels.
If you look out close to where the engine and the inner fender meet, just a little in going back to the center, you will find two on each side on the 2.5 non-turbo. These have plug wires going to them.
On a turbo, the plugs are actually right in the side of the engine, going into the tops of the cylinder heads below the ignition coils which you remove first, to get to them. The same is true with the 3.0 engine.

May 02, 2009 | 2005 Subaru Legacy

1 Answer

Head bolt toqure


Hope this helps, from autozone site. Curt
Application:
Cylinder head bolt torque sequence

Note :
Torque sequence:
---------
front | 3 1 6 |
of | |
vehicle | 5 2 4 |
---------
Step 1: Lightly oil cylinder bolt threads & washers
Step 2: Torque to 22 Ft/Lbs
Step 3: Torque to 51 Ft/Lbs
Step 4: Loosen all bolts 180 degrees
Step 5: Loosen all bolts 180 degrees
Step 6: Torque bolts 1 & 2 to 25 Ft/Lbs
Step 7: Torque bolts 3, 4, 5, 6 to 11 Ft/Lbs
Step 8: Turn all bolts an additional 80 to 90 degrees
Step 9: Turn all bolts an additional 80 to 90 degrees
*** CAUTION ***
engine uses Torque To Yield head bolts (TTY) that
permanently stretch during the initial installation.
New head bolts must be used when cylinder head is
replaced or re-installed to obtain proper Torque.

Apr 24, 2009 | 1995 Subaru Legacy

1 Answer

Car will not start


Well, since you had the heads off, the valve timing comes to mind...

Do you have compression now?

If not - rings,

If compression good, then did late spark burn exhaust valves and you are now chasing your real problem?

Mar 22, 2009 | 1991 Subaru Legacy

2 Answers

1990 subaru legacy


Both head gaskets have to be replaced and the heads need to be resurfaced, be sure you go thru the torque specs and sequence correctly, it is a strange process, but has to be done. subaru puts out a product called cooling system conditioner, it's advised to install this.

Sep 21, 2008 | 1990 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...