Question about Kia Rio

Open Question

Remove back seat from kia rio

I have removed the clips from the back seat of the kia, but need to know how to remove the entire seat. any suggestions?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mohammed387
  • 1952 Answers

SOURCE: replacing fuel pump need to remove rear seat need to know how

First you will need to releave fuel pressure......

next remove the rear seat cushion to gain access to fuel pump access panel.....

Removing Fuel Pump....

Posted on Jan 29, 2009

Ad
c17hydro
  • 2984 Answers

SOURCE: Need help replacing front hub

Here's the steps....getting some pics for you....hang on a minute or two.

Front Hub Removal & Installation To Remove:

  1. Remove steering knuckle.
  2. Using a suitable slap hammer, remove wheel hub assembly.
  3. Using a suitable bearing press, remove outer bearing, oil seal, outer bearing race and preload spacer.
  4. Remove inner oil seal, inner wheel bearing and inner bearing race.
NOTE: It is not necessary to remove dust cover (back plate).
To Install:
  1. Using a suitable bearing press, install bearing races in steering knuckle.
  2. Pack the bearings and hub area with lithium grease.
  3. Install inner bearing in steering knuckle.
  4. Lubricate lip of NEW inner seal and press seal into knuckle.
  5. Install preload spacer into bore.
  6. Install outer bearing into bore.
  7. Lubricate lip of NEW outer seal and press seal into knuckle.
  8. Using an appropriate tool, support inner wheel bearing and press wheel hub into knuckle with a force of 2500kg.
  9. Install NEW inner seal.
  10. Install knuckle assembly.

Posted on May 13, 2009

  • 159 Answers

SOURCE: How to remove back seat?

there is either two bolts or to release pins on the front in between the seat and floor board.

Posted on Jun 05, 2009

  • 1 Answer

SOURCE: How to replace top (3rd) brake light on Kia Optima 2007

This answer makes a mountain out of a mole hill! There are two screws directly under the light accessible from the trunk (in two hole, the wires come out of one of them)- just unscrew and you can manuever out without taking off the whole back panel.

Posted on Jul 05, 2009

  • 5 Answers

SOURCE: locked my keys in trunk of 2002 kia rio

Two large bolts secure the bench in place. Remove them. Three large bolts sechur the backrest in place. Remove them. Lift the backrest up until it unhooks from the three supports near the top. You will the be able to remove the plastic panels leading to the trunk. They are secured with small plastic retainers. Good luck. Takes about 15 minutes.

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to get keys out of my trunk 2009 Kia optima threw back seat


remove lower part of back seat clips most likely hold it in place

find screws / bolts that hold the top part of back seat in place
lift it up
pull out
hopefully enough space in fire wall to get a coat hanger into the boot space or your arm into boot space.


if this not possible contact a locksmith or maybe auto club roadside assistance

Oct 18, 2016 | 2009 Kia Optima LX

1 Answer

Remove rear bench seat


I don't know about your exact make, but every bench rear seat bottom I ever messed with removed as follows:

Get your fingers under the bottom of the seat cushion, and give a sharp tug upwards.
It should be held in by spring clips, which will release with the upward tug.
With the front of the seat cushion slightly raised (so the spring clips can clear the brackets), it should then pull straight forward and out.

To re-install, push the cushion back under the seat back (with the front slightly raised), and with both hands, give a sharp push downwards to latch the spring clips.

Apr 24, 2014 | 1998 Nissan Pathfinder

1 Answer

How to remove the driver seat back panel 2005 Kia Optima power driver seat


there is 2 elastic pieces that hook on the seat bottom once you unclip them the cloth part of the seat bottom will pull up to reveal 2 Phillips screws remove them and the panel should slide down to remove.

Mar 30, 2014 | Kia Optima Cars & Trucks

1 Answer

I want to fold down my back seat on my 1999 Chevy Cavalier but the hook/corded loop came off and i don't know how to get my back seat down ...any solutions???


You will probably have to disassemble the rear seat to fix the latch. The lower seat cusion has latches that can be pushed in with a flat-blade screwdriver. If you pull up on the seat a little, you can see them. They are made of white plastic. There is a button on the front of them that will release the lower cusion. I usually use a flat-blade screwdriver to push on the latch buttons because they can be really hard to push by hand. Once the seat cusion is out, you can access the bolts that hold the seat back assembly in. You can remove these bolts and remove the entire seat back assembly.. Once the seat back is loose, you will have to reach around the seat assembly to remove the push-clips that hold the trunk-side carpet to the back side of the seat. You will then be able to work on the seats to repair the latch. (pull cords)

Apr 06, 2011 | 1999 Chevrolet Cavalier

1 Answer

How to remove bottom of back seat need to remove seat to remove rear shocks..


PUSH IN CENTER FRONT EDGE CUSHION TO DISENGAGE PART OF SEATS WIRE FRAME FROM CLIPS.WITH CLIPS UNHOOKED LIFT UP AND REMOVE SEAT.IF REAR SEAT NOT HELD IN PLACE WITH CLIPS. LIFT UP THE REAR SEAT CUSHION AND PIVOT IT FORWARD. DETACH THE RETAINING BOLTS AT THE LOWER EDGE OF THE SEAT BACK AND IF NECESSARY REMOVE THE SEAT BELT ANCHOR BOLTS.LIFT UP ON SEAT BACK REMOVE IT..

Feb 06, 2011 | Jaguar X-Type Cars & Trucks

1 Answer

How do I remove the back seat of my 1991 Nissan Stanza to access the fuel pump? Autozone says to remove rear seat cushion mounting bolts but how do you get to them?


I replaced my rear speakers I had to remove the entire rear seat bottom and top as for the bottom just pull up theres nothing holding it down just a few body clips like the ones that hold the door panels in place

Mar 18, 2010 | 1991 Nissan Stanza

1 Answer

I need to remove the rear seat in my Kia so I can get my scooter into the back of the KIA.


I removed the backseat of my 2000 kia Sportage so my Labrador could have enough room to move around when we travel. Its easy to do (I'm a girl w/little mechanical experience) so you can do it easily. The bolts are easy to find in the front of the seat and the back. Just unbolt and take out the seat.

Mar 15, 2010 | Kia Sportage Cars & Trucks

1 Answer

I was removing the rear seat in a Kia Sedona. However, the front clamps (of the seat) got attached to the rear bars and now I cannot get the seat out. Any advice? Thank you.


hi squeeze the bars together and it will release the clips for you. if you need more information someone on this kia forum had the same problem and was given the steps to-do it.

http://www.kia-forums.com/kia-carnival-sedona-forum/38775-kia-sedona-2000-rear-seat-removal.html

Dec 29, 2009 | 2003 Kia Sedona

2 Answers

Sensors for kia sephia 1994


To remove the Gas tank on a 1994 kia sephia, you would have to remove the back seat. Be careful to unfasten the two clips at the lover part of the seat in order to remove it.

remember to disconnect the battery so you wont have any chances of sparkles while handling the fuel pump.

In this 1994 kia sephia model it is not necessary to drop the fuel tank to service the fuel pump.

Apr 23, 2009 | 1994 Kia Sephia

5 Answers

How to replace top (3rd) brake light on Kia Optima 2007


This answer makes a mountain out of a mole hill! There are two screws directly under the light accessible from the trunk (in two hole, the wires come out of one of them)- just unscrew and you can manuever out without taking off the whole back panel.

Apr 17, 2009 | 2007 Kia Optima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...