Question about 2005 GMC Sierra 2500HD 4WD

2 Answers

Heated seats will not come on and drivers side seat does not work at all. fuses have been check are there more fusesto check??

Posted by on

  • Zoltar1008 Jan 28, 2009

    Drivers power and heated seat does not work. Passengers heat does not work, but has power. Cannot find fuse or relay for it.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

See GM TSB 05-08-143-001, If you have Adjustable pedals, especially if they don't work with the memeory buttons, but function with thier own buttons. Its the Brake Pedal Position Sensor is shorted and mesing up the seat module which controls the heaters too. My 05 Suburban had the same issue. Can check by unplugging switch and see if heated seats work .

Posted on Dec 11, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Have you Checked Both Fuse Boxes---Under the Dash and Under the Hood?

Posted on Jan 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Trying to find which fuse is for the heated seats on a 2004 ford explorer sports trak


Heated Seats
This system allows the electrical heating of the front seats on passenger demand.
The components of the system are:
  • the seat heating elements located in the seat cushion and backrest.
  • the heated seat control switch, located on the seat side trim panel.
  • temperature sensors located in the seat cushion heating elements.
  • heated seat relay.
Do both front seat heaters not work ? Do you know how to test electrical circuits with voltmeter ?
PINPOINT TEST J: THE HEATED SEAT IS INOPERATIVE Test Step Result / Action to Take J1 CHECK HEATED SEAT SWITCH OPERATION
  • Key in ON position.
  • Press the heated seat switch on the driver and passenger seats.
  • Are both heated seat switch indicators illuminated?
Yes
If both indicators illuminate, Go To Pinpoint Test K . If only one indicator illuminates, GO to J5 .

No
GO to J2 . J2 CHECK THE HEATED SEAT RELAY CIRCUITS
  • Key in OFF position.
  • Disconnect: Heated Seat Relay C3250 (located under the driver seat).
  • Key in ON position.
  • Measure the voltage at heated seat relay C3250-86, circuit 1003 (GY/YE), harness side and ground; and between C3250-30, circuit 566 (DG), harness and ground.
    s5r~tr~en~file=a0078817.gif~gen~ref.gif
  • Are the voltages greater than 10 volts?
Yes
GO to J3 .

No
REPAIR inoperative 1003 (GY/YE) or 566 (DG) circuit. TEST the system for normal operation. J3 CHECK HEATED SEAT RELAY GROUND CIRCUIT
  • Key in OFF position.
  • Measure the resistance between heated seat relay C3250-85, circuit 57 (BK), harness side and ground.
    s5r~tr~en~file=a0078818.gif~gen~ref.gif
  • Is the resistance less than 5 ohms?
Yes
GO to J4 .

No
REPAIR circuit 57 (BK). TEST the system for normal operation. J4 CHECK THE HEATED SEAT RELAY
  • Install a fused jumper lead between heated seat relay 3250-30, circuit 566 (DG), harness side and heated seat relay C3250-87, circuit 1064 (YE/LB), harness side.
    s5r~tr~en~file=a0078819.gif~gen~ref.gif
  • Do both heated seat indicators illuminate when pressed?
Yes
INSTALL a new heated seat relay. TEST the system for normal operation.

No
REPAIR circuit 1064 (YE/LB) to switches. TEST the system for normal operation. J5 CHECK INOPERATIVE HEATED SEAT SWITCH INPUT
  • Key in OFF position.
  • Disconnect: Heated Seat Switch C320 (Driver) or C321 (Passenger) for the inoperative heated seat.
  • Key in ON position.
  • Measure the voltage between heated seat switch C320-2 (driver) or C321-2 (passenger), circuit 1064 (YE/LB), harness side and ground .
    s5r~tr~en~file=a0078820.gif~gen~ref.gif
  • Is the voltage greater than 10 volts?
Yes
GO to J6 .

No
REPAIR circuit 1064 (YE/LB). TEST system for normal operation. J6 CHECK CIRCUIT 57 (BK) FOR AN OPEN
  • Measure the resistance between heated seat switch C320-4 (driver) or C321-4 (passenger), circuit 57 (BK), harness side and ground.
    s5r~tr~en~file=a0078821.gif~gen~ref.gif
  • Is the resistance less than 5 ohms?
Yes
INSTALL a new heated seat switch. TEST the system for normal operation.

No
REPAIR circuit 57 (BK). TEST the system for normal operation It's not that simple , being a fuse . It's probably the relay or the heating element .
PINPOINT TEST K: SEAT DOES NOT HEAT BUT THE HEATED SEAT INDICATOR ILLUMINATES WHEN PRESSED ? Does it ?
Your best bet would be to take to a qualified repair shop .
Do

Jun 29, 2016 | 2004 Ford Explorer Sport Trac

1 Answer

Why is driver's seat not moving, and side mirrors not staying as programmed?


2002 Oldsmobile Bravada: checked fuses under hood..rear ...

www.justanswer.com > Car
Power seats in 2002 Oldsmobile Bravada do not work, checked fuses under hood and... No, it is just the driver's seat that is not working. ... function still works for themirror settings, but the seat just does not move. .... with heated seats, perform all steps on the front passenger side seat as well. .... Ducati 996 runs but wont rev.

2002 Envoy SLT driver seat not working - Car Forums and Automotive ...

www.automotiveforums.com > ... > GMC > Envoy
Oct 4, 2005 - 2002 Envoy SLT driver seat not working ... Also, the heated seat now does not work on the drivers side. I checked all the fuses I could find ... However, the memory program will still recall the mirrors and radio station preferences. ... 2002 Oldsmobile Bravada Built Prior ... Attempt to move the seat. If the seat ...

[PDF]2002 oldsmobile bravada owner's manual - GM Owner Center

https://my.gm.com/.../2002/oldsmobile/bravada/2002_olds... General Motorslearn about some things you should not do with air bags and safety belts. 1-2 ... DMove the rear of the seat control up or down to ... Programming for automatic seat andmirror movement ..... passenger, a side impact air bag for the driver, and.

2002 Oldsmobile Bravada ' Owner's Manual

https://www.manualowl.com/am/Oldsmobile/2002-Bravada/Manual/7079
Get 2002 Oldsmobile Bravada manuals and user guides ... Many times, this damage would not be covered by your warranty, and it could be costly. ... D Move the front of

Feb 03, 2016 | 2002 Oldsmobile Bravada

2 Answers

My audi tt heated driver seat not working knob does,t light up either


Check power to the switch! If power coming to switch then switch is faulty! If no power then check fuses!

Jan 04, 2015 | 2004 Audi TT 1.8L

1 Answer

Gmc jimmy heated seat not working on one side only.


Hello-
If your fuses are good, perhaps your heated seat switch is faulty. You can test the switch for connectivity using a meter to see if power is going through the switch when in the ON position. If the meter shows no power while in the ON position, replace the switch. If power is reaching the seat, then likely the heating element itself within the seat is the culprit.

Apr 01, 2014 | 2000 GMC Jimmy

2 Answers

The drivers seat won't move and the heated seats won't work on both sides. Where is the fuse?


Check underneath the seat for an inline fuse. It is a glass type fuse in a fuse holder that you have to push and twist to get out.-----------------------------------------------------------------------------
XPROG-M

Apr 18, 2013 | 2006 Chevrolet Tahoe

1 Answer

2005 Chevy Tahoe, Driver seat will not move and driver heated seat will not heat?


Have you checked the fuse? Look in owners manual for the fuse block and see if the fuse is burnt.

Dec 01, 2011 | Chevrolet Tahoe Cars & Trucks

1 Answer

Driver's side power seat and heat in both seats not working


hello, have someone check all fuses-and plugs for the power seat, they may be a relay for this problem, can call autoparts store and ask about any relays for the heated seats and the power seat, if thats not it you may have to replace, electric motor for seat, sounds like a fuse, the way it all quit working..

Feb 25, 2010 | 2005 GMC Yukon Xl Denali

2 Answers

Heated seat does not work on drivers side. Fuse checks ok


the grid in your seat has shorted out if the right one works The relay controls both seats so you diffently have a burnt grid

Feb 14, 2010 | 2003 Buick LeSabre

1 Answer

My driver side heated seat doesn't work the passenger side does. I checked both fuses and neither one are blown.


the seat heater element is bad,,the heated seat pad has a open, the wire burns a hold in it from wear and tear and then they dont work,its most likely the drivers side seat back,,,,

Oct 12, 2009 | 2004 Saturn VUE

1 Answer

Drivers side heated seat not working what can I


check the fuse on the panel, the fuse panel are located in the driver side right by the panel,and check the wires under the seat.

Sep 15, 2009 | 2006 Ford F 350 Super Duty

Not finding what you are looking for?
Cars & Trucks Logo

468 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...