Question about Cars & Trucks

2 Answers

I have a 1996 landcruiser and I have a gearbox problem, it seems to be getting stuck in gear and feels like its building pressure in the box, it still drives barely and it's also making a whining nois

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,384 Answers

Go check your clutch master cylinder,if empty,then your slave cylinder is bad,you can fill up and bleed to get you to a auto parts store to replace,if fluid is okay,then disreguard this.

Posted on Nov 27, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,036 Answers

WHINE NOISE COULD BE MANUAL TRANSMISSION LOW IN LUBRICANT OR LUBRICANT NEED CHANGING.TRANSMISSION COULD HAVE WORN BEARINGS AND WORN GEARS.

Posted on Nov 27, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Nissan Almera

Drive till it breaks is the best i can tell you...rackenpinion is the problem..

Posted on Sep 24, 2008

  • 6 Answers

SOURCE: Peugeot 406 HDi jumps out of 5th gear

sometimes a nut comes loose behind the end cover on ml5 box.

Posted on May 04, 2009

  • 2 Answers

SOURCE: gear box stuck in park

try rocking the car back and forward to see if it will losen the gear stick.

Posted on Jun 01, 2009

  • 23 Answers

SOURCE: gearbox makes whining noise

sounds like syncro bearings in trans

Posted on Jul 20, 2009

  • 119 Answers

SOURCE: VW GOLF 1.4 1999 S. Gearbox makes whining sound at idle

No good news on this one I think
Your whining sound problem is the Layshaft bearings in the gearbox are badly worn. It also seems that the baulk rings are damaged on 5th gear.
John

Posted on Aug 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Metal grinding noise from gearbox


Pull the gear box drain plug and check for heavy metal stuck to the magnet. I suspect that the clutch in-put shaft bearing has failed. If so you will have to have the gear box rebuilt as the metal will have affected the other bearings

Sep 03, 2013 | 1996 Nissan Sentra

1 Answer

Started having trouble getting it into gear while stopped. Would have to rev up engine a bit and play the shifter in. About 20 min. later while shifting from 2nd to 3rd had no gears . now it won't find any...


Sounds like your cluch has worn out. Can you select gears normally when the engine is off? If you can, then maybe you could check the clutch cable adjustment. That may fix the problem. If not, with the car in an area away from other cars and buildings, select a gear with the engine off, and with your foot on the clutch, start the car. If the car starts and feels like it wants to drive off (with your foot still on the clutch), then the clutch is not disengaging the engine from the gearbox. Gearbox removal time unfortunately.

Dec 31, 2009 | Suzuki Swift Cars & Trucks

1 Answer

Subaru impreza 1995 wrx automatic gearbox repair can not get any gears put gear box in car .the gear box came out of a legacy


you have a bigger issue,the diff ratio in the gearbox needs to be the same as the rear diff,is it if not you need to change it you may need another box alltogether

Sep 24, 2009 | 1996 Subaru Impreza

2 Answers

Refill gearbox oil landcruiser hj75 1985?


Look on either side of the gear box and about half way up you will see a big bolt head.remove it and pump oil in it till it starts running out then you know its full to the right capacity

Aug 02, 2009 | 1985 Toyota Land Cruiser

1 Answer

No gear at all


take ur gear box of and chech wear ur speedo plug is and if ur car run before ur plug got lost then yh thats ur proplem

Mar 04, 2009 | 1991 Mazda 626

2 Answers

Hi, I have a 1991 Suzuki JLX Vitara with the Front Right hub is locked into 4WD and I can seem to unlock it and the gearbox of late feels notchy, sometimes difficult to change into gear


Try hammering the front right hub with a wood or a rubber hammer while slowly reversing the vehicle, and keep on unlocking the hub while doing this.
spray it with lubrication first
yes, you need to change the gear oil in your gear box
Have your clutch re adjusted, it may be worn out , that's why you are having a hard time changing gears or have it bleed to keep the air out if you are using hydraulic.
If you dont hear any noise in your gear box while driving, its nothing serious, worst thing could be replacing your clutch lining and pressure plate.

Oct 07, 2008 | 2000 Suzuki Vitara

1 Answer

Vehicle Transmission


Seems like you have a seized gearbox. If the engine can turn on the starter when you depress the clutch that will confirm the problem lies in the gearbox. One outside possibility is that there is an inboard handbrake on the Isuzu. An inboard handbrake is commonly located at the back of the gearbox on the drive shaft. If this is the case it could be the handbrake jamming.

Sep 18, 2008 | 1999 Isuzu Trooper

3 Answers

Problems with gear box


Hi

If the clutch feels ok and isn't biting right at the bottom or right at the top then it sounds like its time for a recon or 2nd hand gearbox to be fitted.

I recently fitted a 2nd gearbox to a seat ibiza GTi which actually has the 2.0 Golf engine fitted to it and it wasn't too bad at all, but it is adviseable to fit a clutch kit whilst the box is off.

Very best regards

Geordie

Jun 05, 2008 | 1996 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...