Question about Ford Cars & Trucks
Hi!, my stop lights are not working, I turn on lights and they work but stop lights are not working Could be a relay ? or fuse ? I check them and also lights bulbs .. they look ok
Faulty switch on the brake pedel. check for power going to and from .
Posted on Nov 26, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
chapmnfarm: your head lights use a "2" fuse system.
one for the left and one for the right.
The fuse box you are looking for is under the hood on the passenger's side. It is a black box roughly 8 inches long and 4-5 inches wide. When you remove the cover, you will see fuses and relays. What you are looking for is the section in the box which has a cluster of 7 fuses. 3 in one row and 4 in the other. On the outer parameter are two relays. The fuses you are interested in are located in the row of 4 fuses, with the two closest to the "L" shaped part of the box. Both of those should be 15 amp fuses.
The fuse below those should be a 20 amp which is the lighting switch and the one below it is a 15 amp which is for the interior lights and the clock.
Check your harness grounds in the engine compartment near the area you have the problem. There are ground wires which come out of the harness on both sides of the core support. The wires are black in color and have "EYES" crimped onto the ends of the wires. Both of them will probably be located about 4-6 inches below the upper tie bar on each side of the radiator. Odds are that the eyes will be large enough to pass a 6mm bolt through.
I hope what I have given you will resolve your problem. Lem me know,,good luck>>>>>>>>>>>>>>>
Posted on Apr 19, 2009
take the bulb back out have someone sit in car apply brake get your self a circuit tester and check to see if this circuit is carrying efficient 12 volt current! some times in cold weather these bulbs get hot with long period of breaking and when released condensate and rust begins and you get what you have perhaps bad socket! this would be a ideal location to begin and probably end,
Posted on Jan 03, 2009
These are Dual Function Bulbs. They control the Parking Lights and the Brake Lights. This Bulb is Burnt out on the Brake Coil inside the Bulb. I have actually seen Bulbs that were Bad But you could not Tell by jast looking at them. It should be fine with a New Bulb. Please Rate My Response! Thanks!
Posted on Feb 05, 2009
check the wiring from the tailights back to the fuse panel, it sounds like an open connection. if i recall correctly check under the dash on the drivers side near the fuse panel for a bunch of wires in a bundle and look carefully for a wire or two that are cut/shorted/or seperated, you can also check under the drivers side kick panel by the hood release.
Posted on Feb 17, 2009
Tips for a great answer:
Mar 21, 2015 | 2000 Chevrolet Cavalier
Dec 13, 2012 | 2008 Ford F-150
Jun 09, 2011 | 2004 Ford Expedition
Jan 01, 2011 | 2001 Honda Odyssey
Sep 24, 2010 | Chevrolet Blazer Cars & Trucks
Jun 21, 2010 | 1999 Cadillac DeVille
Jun 02, 2009 | 1999 Chevrolet Cavalier
May 08, 2009 | 1993 Nissan Pathfinder
Jan 19, 2009 | 1999 Ford F150 Regular Cab
174 people viewed this question
Usually answered in minutes!