- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
CarGurusAug 16, 2011 - car won't start - replaced ignition lock on 2002 pontiac sunfire antitheft light is ... system goes into fail safe mode and you won't have any more problems. ...lock cylinder on 2003 pontiac sunfire....when new lock cylinder was ...
The 1137 OBD2 code is typically an o2 sensor problem as you have indicated, first I would make sure your replacing the correct o2 sensor as there are two (upstream and downstream), although it is possible that a bad o2 sensor could keep your engines fuel injection system from delivering the fuel to your engine, in my experience having a bad sensor typically results in a check engine light and running with a less than optimum fuel air mixture, it does not typically keep your vehicle from starting. If your still getting the 1137 error code after replace the o2 sensor and checking its connecting wires I would start looking for a bigger issue.
This happened with my Sunfire. It was the radiator. The engine wasn't cooling, but the sensor wasn't showing that it was overheating. So the engine would start when it was cool, but as soon as it got hot, then if I stopped it wouldn't start again.
first of all, was the water on the passenger side from the air conditioner or a leak (what color was the fluid?)-the cap has to be tight, otherwise it will not hold pressure, so that has to be checked before you set off again-push down as you turn the cap clockwise, and it will not hurt to have water in the system (it actually transfers heat better than antifreeze) but it has a much lower boiling point, so the cap has to be tight. Pay attention to the temperature gauge and do NOT overheat it-it is an aluminum engine and they do not tolerate excessive heat. Take your time, no AC (although the AC being on can keep a good cooling system more stable since the radiator fan is forced on when the AC is running, so you can, within reason, experiment)-no matter what, just don't let it run hot-not worth it.
You will have to get the codes for both of these modules.Then you can post back and I can help you and explain what they mean.Auto Zone will check the service engine soon light but I don`t know if they can check the theft light.They won`t charge you.
You did not say if your service engine light comes on or not, If that don't come on its hard to pinpoint the problem as it sounds electrical. And whatever i tell you would only be a guess. need more info to help.