Question about 2001 Dodge Ram 2500 Truck

1 Answer

What is a Code 84

2001 Dodge Ram 2500 Diesel ABS scanner shows code 84. I have replaced the brake switch and speed scensor. The brake light and abs light continues to stay on. I have disconnected the battery to reset codes after the above parts were replaced.

Posted by on

  • Rick Byrd
    Rick Byrd May 11, 2010

    no such code for abs , abs only goes up to 27 . and thats not an obd II code so , please retrieve code again .

  • Anonymous Mar 23, 2014

    ABS light came on computer shows code po573

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

Hello
Welcome to FY
I would check your speed sensor located on the rear end this is on top of the housing this will throw that code too.
RD

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1995 dodge ram 2500 cummins the abs and brake lights are on and the cruise control is not working? I have replaced the master cylinder and the speed sensor in the rear axle


The warning lights mean there should be a trouble code stored in the body computer. I would start there.
When the ABS system is inop it may prevent the cruise from working too. Sometimes a hydraulic brake system failure will turn the ABS light on too. After repairs you would need to scan the system to turn the light off with most vehicles.
Are the brake lights in the rear of the truck staying on ?

Jul 03, 2012 | 1995 Dodge Ram 2500

1 Answer

I have 2004 dodge diesel 2500 and when i turn my wheel left my abs light comes on and brake light comes on my brake pedal goes to the floor and i have no brakes and when i turn the wheel back the abs and...


Its the wheel speed sensor, or the wires are damaged. Turn the wheels to the left and then go look at the harness. is it streched out? (as in not enough slack) Is it touching or rubbing something. Has it come loose from its clips? Look at the face of the sensor. A few scratches are okay but, if it looks hammered, its probably damaged and should be replaced. If the hub bearing was bad enough to allow contact damage to the WSS you would have much bigger problems.

Aug 30, 2011 | 2004 Dodge Ram 2500

1 Answer

EtON 1999 Dodge Ram 2500 4x4 Diesel 5 speed trans. ABS light on, brake light on and speedometer starts working about 20mph.


there is an ABS sensor on top of the rear axle, and they are known to cause these symptoms-check the wiring, connector, and replace it if necessary, they are about $30 and is held in place with one bolt.

Mar 23, 2011 | 1999 Dodge Ram

2 Answers

I Have a 2002 Dodge Ram 2500.Both the ABS and Brake Lights are on


Hi!!

Did you have the ABS sensors checked ?? The brake fluid level when low also activates the Brake and ABS lights?? Drive truck to an AutoZone store and ask to have computer codes scanned. This is a free service for all customers. This will help you to pinpoint the problem.

Good Luck!!

Don't forget to rate this post.

Jun 04, 2010 | 2001 Dodge Ram 2500 Truck

1 Answer

I Have a 2002 Dodge Ram 2500.Both the ABS and Brake Lights are on


Does the speedometer work? Out might have a bad speed sensor in the rear axle. Did you have it scanned for codes?

Jun 04, 2010 | 2002 Dodge Ram 3500 Truck

1 Answer

I Have a 2002 Dodge Ram 2500.Both the ABS and Brake Lights are on


did you check the brake fluid level? you dont just go replacing parts without knowing what is bad. The abs unit will have trouble codes, get those codes and tell us what they are.

Jun 04, 2010 | Dodge Ram 2500 Cars & Trucks

1 Answer

I have a 2007 Dodge 2500 5.9lt diesel. Recently


Try this website to download a free manual

Trouble trees are listed for all makes in the manuals for dianogstics



http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

May 01, 2010 | 2007 Dodge Ram 2500 Mega Cab Laramie

1 Answer

The brake light and abs lights stay on on my 1999 dodge 1500 van


your ABS has a trouble code. Need to have code read with scanner. Common problem is the rear wheel speed sensor.

Nov 10, 2009 | 1999 Dodge Ram

1 Answer

Dodge 2500 ram diesel no tail lights and my abs


replaced the IPM (the fuse box) it was shorted

Oct 25, 2009 | 2001 Dodge Ram 2500 Truck

2 Answers

I have a 1989 s-10.The parking brake light blinks six times,pauses then flashes again.I was wondering what trouble code that would be???Thanks.


RWAL Fault codes
Codes for Dodge RWAL, Ford RABS and GM RWAL applications are similar but have a few differences:
  1. Should not occur (replace the controller if it does)
  2. Open isolation valve circuit or defective ABS module
  3. Open dump valve circuit or defective ABS module
  4. Grounded or closed RABS or RWAL valve switch
  5. Excessive actuations of dump valve during ABS braking
  6. Erratic speed sensor signal
  7. Shorted isolation valve or defective ABS module
  8. Shorter dump valve or defective ABS module
  9. High resistance or open speed sensor circuit (resistance should be 1000 to 2500 ohms)
  10. Low speed sensor resistance (Dodge & Ford only)
  11. Open speed sensor circuit (GM only)
  12. Stop lamp switch circuit (Dodge & Ford)
  13. ABS module speed processor (Dodge & Ford only)
  14. ABS module program (Dodge & Ford only)
  15. ABS module RAM memory failure (Dodge & Ford)
To manually clear a stored fault code on GM and some Dodge trucks with RWAL, remove the ABS fuse or disconnect the battery for 5 seconds. Ford RABS codes will automatically clear when the ignition is turned to the off position.

Aug 26, 2008 | Chevrolet S 10 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

1,086 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...