Question about 1997 Ford Ranger SuperCab

2 Answers

4 wheel drive

Can someone tell me the proper way to use my 4-wheel drive on my 1997 ford ranger please. like do I need to put it into reverse at some put to engage or disengage it? how fast can I drive in 4-wheel? etc...

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 14 Answers

Park or neutral is always a safe bet. If its electronic its probably safe up to 20mph as long as your not accelerating. I wouldn't go much faster than 60mph in 4x4. if you really need to use 4x4 you shouldn't be going too fast anyways.

Posted on Jan 10, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 33 Answers

If its push button 4x4 you can be in nuetral or drive and not to exceed 40mph in 4 hi and u dont need to put it in reverse

Posted on Jan 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What can be wrong with my truck transmission?


I would guess the torque convertor has failed and you need it replaced

Jan 14, 2016 | Cars & Trucks

1 Answer

4x4 will shift to 4 high but will not go to 4 low


Ford Ranger Questions - 4 wheel drive relay clicking under ...

www.cargurus.com > Questions > Ford > Ranger
CarGurusJun 5, 2013 - 4 wheel drive relay clicking under dash - i put my truch in 4x4 the other day and ... and watch it move (or not move) while selecting 4x4 high, low and so forth.... MY 1999 Ford Ranger 4x4 will not go in 4 wheel drive 5 answers.

Sep 14, 2015 | 1999 Ford Ranger SuperCab

1 Answer

Ford ranger 4wd i have a 1996 ford ranger


Go to a junk yard and obtain a 1966 Ford Ranger transmission. Remove the old unit and do an exchange.

Aug 04, 2013 | Cars & Trucks

1 Answer

1998 ford ranger wont reverse, the right real wheel wont spin but the left real wheel spin. It can only drive forward but not in reverse. Please help us on how to do it yourself.


either brakes are seized or the wheel bearing is seized. most likely the brakes are what seizes up. just jackup, and take tire off to check it out. it maybe a stuck brake, rust or dirt, or maybe a broken spring or two. good- day ! but first reach in back of tire and pull on the e-brake cable a few times at the problem wheel, it may be binding.

Jul 20, 2011 | 1988 Ford Ranger

1 Answer

What is the fuel pressure suppose to be 89 ford ranger 2.9


I had a 1990 and if I remember rite it was 30psi when i put in the new fuel pump. Any auto parts store can look it up for sure and tell you. I think it matters if it is two wheel or 4 wheel drive also.

Feb 09, 2011 | 1989 Ford Ranger

1 Answer

1999 4x4 ranger comes out of four wheel drive


Put manual lockers in it. And remember, you have to back up 50 feet to lock in the hubs, automatic or manual. Not doing this could cause your problem.
Calvin the Mobile Mechanic

Apr 23, 2009 | 1999 Ford Ranger SuperCab

1 Answer

2001 ford explorer sport trac 4 wheel drive wont work


Start the car
put in " N"
turn the 4X4 switch on
Then put in gear..
What do you see now?
Do the same in reverse when you take out of 4X4

Jan 19, 2009 | 1999 Ford Ranger SuperCab

1 Answer

1994 ford ranger truck


check transmission fluid level with engine running and in reverse with handbrake on and chocks under wheels

Oct 16, 2008 | 2001 Ford Ranger Regular Cab

Not finding what you are looking for?
1997 Ford Ranger SuperCab Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...