Question about 1990 Ford F150

Open Question

2009 ford f150 truck fuel pump - 1990 Ford F150

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: 1991 ford f150 no noise from fuel pump and truck will not start

get a code reader like the Actron CP9015 Code Scanner, 20 dollars and will flash codes. if it will not diagnose itself, the ecm must be replaced. this fixed my dads truck with the same problem

Posted on Nov 28, 2008

  • 491 Answers

SOURCE: 1988 ford f150 fuel pump relay location

inner driver side fender well along with the eec relay

Posted on Feb 02, 2009

  • 1 Answer

SOURCE: 1995 ford f150 fuel pump

truck doesn;t start it mite be the fuel pump or relay switch

Posted on Feb 16, 2009

  • 5495 Answers

SOURCE: tapping or knocking noise in 2009 f150 4.6 3v engine

Tell them you heard about a recall for the CAM PHASERS. When the noise is present and you rev the engine to 2000RPM the noise will fade away. This verifys the CAM PHASERS are acting up.

Usually the sound progresses to the DIESEL level. Further use can damage the engine. There is a service bulletin for this problem. Yours must be an early 2009, last I heard the problem was for 2004-2008 models with dual cams.

Posted on Oct 21, 2009

techbuster
  • 5081 Answers

SOURCE: how do I replace the fuel pump on a F150 Ford

Things You'll Need:

  • Ratchet and socket
  • Wrench set
  • Floor jack and 2 jack stands
  • Ratchet extension
  • Fuel tank sending unit wrench number 310-123
  • Screwdriver
  • Slip joint pliers
  • New O-ring seal
  • Clean engine oil.
Steps to replace fuel pump:
  • Detach the splash shield from the frame rail located underneath the driver's side door. Use a ratchet and socket.
  • Unplug the electrical connector you will see after removing the splash shield. The connector leads to the fuel pump module.
  • Start the engine and let it idle until it stalls. Then crank the engine for about 5 seconds to relieve the remaining fuel pressure from the system. If the engine does not start due to a bad fuel pump, crank the engine to make sure fuel pressure is relieved.
  • Turn the ignition key to the Off position.
  • Disconnect the ground, battery cable from the battery using a wrench.
  • Jack up the rear of your F-150 using a floor jack and support it on 2 jack stands.
  • Remove the tank shield if your particular model is equipped with it using a ratchet, ratchet extension and socket.
  • Support the fuel tank with the floor jack.
  • Disconnect the straps holding the tank to the truck's body using the ratchet, ratchet extension and socket.
  • Lower the fuel tank just enough to gain access to the fuel lines, vapor lines and fuel pump electrical connector on top of the tank.
  • Disconnect the fuel lines and vapor lines from the sending unit/pump module. Press the lock tabs on the lines quick connectors and carefully pull the lines from their fittings. Then unplug the pump-module electrical connector.
  • Release the sending unit/pump module by turning the lock ring counterclockwise using the fuel tank sending unit wrench 310-123 or equivalent. See the Resources box and Tip boxes at the bottom of this article for more information.
  • Lift the sending unit/pump module off the tank carefully and discard the O-ring seal underneath the flange of the module.

    Install the Fuel Pump
  • Remove the old fuel pump from the module using a screwdriver and a pair of slip joint pliers and install the new pump on the module.
  • Lubricate the new O-ring seal with clean engine oil and lay the seal on the fuel tank opening.
  • Install the sending unit/pump module in the tank and turn the lock ring clockwise using the fuel tank sending unit wrench.
  • Lift the fuel tank just enough to attach the fuel lines, vapor line and plug the pump module electrical connector.
  • Raise the fuel tank to set it in its mounting place and secure the tank straps using the ratchet, ratchet extension and socket.
  • Install the fuel tank shield using the ratchet, ratchet extension and socket, if you had to remove it.
  • Lower your F-150..
  • Connect the ground, battery cable using the wrench.

Posted on Dec 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of fuel relay switch on 2004 ford f150 4x4 5.4 triton


Having fuel delivery problems ? It's not the fuel pump relay ! You probably have a bad fuel pump driver module . Pull you spare tire down an look on the frame above ! Watch this
F150 Expedition No Start P1233 Fuel Pump Driver Module

Apr 17, 2017 | Ford Cars & Trucks

1 Answer

Ford truck


Do you have 2 gas tanks?

Jun 21, 2017 | Ford F-150 Cars & Trucks

1 Answer

When putting gas in the tank of 2009 F150, the gas overflows when the gauge shows only 5/8 full. I cannot fill the tank.Any suggestions


Tank is full. The level swith is bad. Have to pull the bed to get to the fuel pump. Pump and fload is all in one. If you work on this yourself, replace the whole unit with Ford parts, do not use after market it will not last. If under warranty just go to dealer. Good luck..

May 14, 2011 | 2009 Ford F-150

1 Answer

Mechanical difficulties


sounds like a clogged fuel filter or a fuel pump that is not delivering enough volume .. they had some trouble with fuel pumps about that year but not sure on the f150 .. if you let the fuel level get too low then it would overheat and damage the fuel pump ... here is instructions on testing the fuel pump.:
http://www.ehow.com/how_5061273_replace-fuel-pump-ford-f.html

Feb 22, 2010 | 1992 Ford F150 SuperCab

2 Answers

Location of fuel pump shutoff switch on 1993 f150 6cyl 4.9 liter


front passenger side kick panel. Basically right where the right foot would hit the side of the truck.

Oct 05, 2009 | 1993 Ford F150 SuperCab

2 Answers

1995 ford f150 fuel pump


Your truck is fuel injected. On the fuel delivery rail in the engine compartment there is a cap you can take off to check for fuel pressure. Hook a mechanical gage to it and check to make sure the fuel pump is working. Also if you have a dash switch to change over to the different tanks check it. Often these switches become bad and the fuel will not flow. The switches are about $ 40.00 dollars. To replace the fuel pumps you must drop the fuel tanks and remove each fuel pump from the tank. The cost for the pumps alone will be about $300.00 to $ 500.00 depending on who you purchase them from. The universals are cheaper, but the Ford pumps are an exact match and you can change them with out any problems.

Feb 08, 2009 | 1995 Ford F150 Styleside Regular Cab

1 Answer

Fuel pump f150


like all Fords the fuel pump is located in the fuel tank.

Dec 23, 2008 | 1998 Ford Windstar

1 Answer

Fuel pump advice


If it is an old electronic fuel pump then it should work fine.

Nov 21, 2008 | 1997 Ford Club Super

Not finding what you are looking for?
1990 Ford F150 Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...