Question about 2004 Volkswagen Touareg
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Find and replace the Blower fan relay, not sure where it is on your VW but it's common to be in with the fuse box by the battery. Good luck and hope this helps. When the relay goes bad from the heat of the electrical current, it seizes and does not disengage keeping the connection causing the ran to keep running.
Posted on Jul 02, 2009
SOURCE: VW Touran 2.o TDI Wiper Problem
its weird ,but you know wipers is not working when computer senses open hood , so you have to look at hood catch. i'm not sure contacts have to be closed or open . anyway it is easy to check
Posted on Jul 13, 2009
Depending on your carb, distributor and transmission, you have from zero to two vacuum hoses.
If you have an Autostick transmission, there's a vacuum hose running from a port in the intake manifold to the control valve on the left side wall of the engine bay. (Hint: if you've got a car that came with Autostick and that someone's converted to manual transmission, the bracket for the control valve is the perfect place for your coil.) Most people don't have this transmission even if their car came with it--it's only a three-speed and it's hard to find parts for it, so most of those cars have been converted to manual transmission.
The other hose you might have is for your distributor. The port is on the left side of the carb, and a hose runs between it and the metal vacuum advance can on the side of the distributor. If you have a 009 distributor or an aftermarket distributor like an MSD you don't have the vacuum advance can; if you have an aftermarket carb like a Weber you don't have the port. Therefore...you probably don't have any vacuum lines on your engine.
if only one vacuum line then? the vacuum line goes from the vacuum advance on the side of the dizzy, to the carburettor, just around the throttle linkage if i recall. hope this helps.
Posted on Aug 11, 2009
The retraction tool all depends on the caliper. My 04 Touareg came with 4 piston Brembo's in the rear and they do not require rotation just compression as in the front which are Brembo 6 piston.
Posted on Aug 30, 2009
Same as any other vehicle.
1. Raise and support vehicle
2. Remove tire/wheel
3. Loosen/remove the two caliper bolts
4. Slide caliper off the rotor.
5. Use a C-Clamp to depress the caliper piston
6. Remove old pads from caliper
7. Install new pads on caliper
8. Install caliper/tighten caliper bolts
9. Install tire/wheel
11 Move to next wheel/repeat
Some people take a turkey baster and remove some of the brake fluid from the master cylinder prior to depressing the caliper piston because it can over flow. If you choose to do that just add the fluid back when finished so it is at its proper level.
Posted on Sep 12, 2009
Tips for a great answer:
Apr 20, 2016 | Cars & Trucks
Feb 09, 2013 | 2004 Volkswagen Touareg
Jun 19, 2012 | 2004 Volkswagen Touareg
Aug 03, 2011 | 2004 Volkswagen Touareg
May 10, 2010 | 2004 Volkswagen Touareg
Apr 01, 2010 | 2004 Volkswagen Touareg
Mar 31, 2010 | 2004 Volkswagen Touareg
Oct 18, 2009 | 2004 Volkswagen Touareg
Jun 11, 2009 | 2004 Volkswagen Touareg
193 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: