Question about 2009 Ford Flex

1 Answer

How do you remove the front power seats in a Ford Flex?

I have a phone charger stuck in the track of the passengers' seat of my Ford Flex. It is causing the seat to malfunction. I can't get it out or break it. How do you remove the power front seats of a ford flex?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Expert
  • 55 Answers

4 bolts 2 in front 2 in back u may have to raze the seat up to get under it.Unplug the power seat then pull up and out.

Posted on Nov 26, 2012

  • Camille Wallin Nov 26, 2012

    I have been able to access the front bolts but I can't see a way to access the back bolts. Are there covers over them like the front ones? How do I remove those if there is?

  • Camille Wallin Nov 26, 2012

    OMG! I can be an idiot! You mentioned raising the seat...I hadn't done that, just moved it forward and back...when I raised the seat the phone charger came right out, no need to remove the seat. Started the car and the indicator that kept saying take stuff out of the passengers' seat went immediately off. It's much more likely to pass emissions testing now (which has to happen this week). Thank You!

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 92 Answers

SOURCE: heated driver seat doesn't heat on 2003 ford explorer

this is a common problem if you use the seat heater alot.one or both of the seat heater elements will have burned up or broken.where i live it is very cold most of the time and i have replaced hundreds of the seat heater elements.it is rare for it not to be one or both of the elements.

Posted on Nov 14, 2008

emissionwiz
  • 76848 Answers

SOURCE: can i switch of the passenger airbag in my 2003 ford focus?

The passenger airbag is what is called a smart generation airbag, there is a sensor in the passenger seat that tells the airbag control module to turn off the bag if the weight is less than 50 pounds in the paswsenger seat, i.e. a child, I work for Ford and we will not turn off or tamper with or disconnect the airbag, why? if you get in a wreck and are hurt because we disconnected or otherwise defeated the airbag we would be liable for damages and a lawsuit.

Posted on Dec 05, 2008

  • 1 Answer

SOURCE: Heated seat

It is the heatling element, stock elements have a single wire snaked through the element and when the circuit breaks it is done, aftermarket elements have a wired grid that if one area fails it still works, they also spread a more even heat.

Posted on Oct 09, 2009

harley9701ha
  • 424 Answers

SOURCE: Power Seat Control does not move the seat front or back

Try tapping the power seat frame with a hammer to unbind the motor .

Posted on Nov 09, 2009

bschilz
  • 2049 Answers

SOURCE: Heated Drivers Seat Ford 500 2006 will not work.

It is usually one of two problems. Either the relay under the seat has failed or the heat element in the seat has failed.

If you are not electrically challenged, you can use a simple volt-ohm meter and check for continuity in the heat element. If you have continuity, the element is good, otherwise that's your problem.

If the heat element is good, you may want to take the good relay from under the passenger seat and put it on the driver's side to see if that fixes it. If so, then you have to get a new relay.

Last, but very unlikely, would be a bad switch.

Posted on Jan 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side electric seat is stuck in the far forward position and won't move. How do I move it manually or fix the motor.


Auto Repair: How to Replace a Power Seat Motor - YouTube

? 1:44
https://www.youtube.com/watch?v=EDh-0rs5Fjo
Oct 26, 2010 - Uploaded by automdvideos
Auto Repair: How to Replace a Power Seat Motor ... 2007 - 2008 Ford Expedition/Lincoln Navigator Driver Bottom Install Video ...2003-2006 Chevy/GMC Seat Cover Install 1 of 3 - eBay Ready ...2000 Ford Explorer Front Seat Track Stuck Motor Repair - Duration: 4:39. by cubmancan 4,959 views. 4:39.
Drivers seat is dead! No power seat or heat. - TheDieselGarage.comwww.thedieselgarage.com/.../96465-drivers-seat-dead-no-power-seat-hea...Mar 22, 2010 - 2003-2005 Chevrolet Avalanche, Silverado, Suburban, Tahoe 2003-2005.... Power seat on driver side didn't work.....passenger did! Neither ...DANG electric seat ' Chevy Truck Forum ' GM Truck Clubwww.gmtruckclub.com/forum/threads/dang-electric-seat.2990/Apr 27, 2006 - 10 posts - ‎7 authors'03 Tahoe My driver seat just stopped, of corse not where I need it, the ... I have a 2003Tahoe and both heated seats are not working. ... with my seat heater on the drivers seat in my 03 Avalanche, it turns ... The driver's side on my Silverado gets way warmer than the passenger side. ... Frozen New Member.Power Seat Problems?? - Tahoe Forum - Che

Dec 29, 2015 | 2003 Chevrolet Avalanche

1 Answer

How to remove bolt covers for front seats on 01 ford taurus


Identify and Remove bolt covers - Instructables

https://www.instructables.com/...remove...seats/.../Identify-and-... InstructablesNext slide both seat forward as far as they can go, and lean the back of the seat forward as well. Find the two bolt covers and remove them as well.

How To Remove Front & Rear Passenger Seats 2006-11 ...

? 15:30
www.youtube.com/watch?v=qCLx3Ak2BvY
Jul 31, 2013 - Uploaded by TheTongMan Here is a tutorial on how to remove the front passenger seat and the rear ... what pieces of equipment are you ...

Oct 21, 2015 | Ford Cars & Trucks

2 Answers

Ford expedition power seat not working up/down nor move forward/ backwards and the seatbelt light indicator is on,please help.


get it serviced, the magic is gone.
complex seat parts.
or read the FSM on all those complex tests.
factory service manual, on topic, seats.

ask ford to fix it or buy the book, or get it serviced anywhere;.

Jan 10, 2015 | Ford Cars & Trucks

1 Answer

How to remove front passenger side seat


Always disable the air bag system first, to prevent accidental deployment of the air bags. The main airbag module is beneath carpeting under passengers seat. To remove passengers seat, At the rear of the seat remove the two bolts securing the tracks to the floor, tilt the seat up and towards the instrument panel, unplug any electrical connectors beneath and remove the seat. the front plastic track covers can remain in place while the seat track tabs are lifted out of the slots on the floor. ( caution disable airbag before removing the seat ) Good-Day! Hope this helps you!

Sep 12, 2014 | 2000 Chevrolet Malibu

1 Answer

How do iremove front seat from a 1997 honda accord


1. Make sure you have the anti-theft codes for the radio and the navigation system, then write
down the frequencies for the preset buttons.
2. Tilt the steering wheel all the way up and telescope it all the way in.
3. '04-07 models passenger's seat: Carefully insert the tip of a small screwdriver (A) through
the hole in the back of the front seat belt lower anchor cover (B) and into the hole in the
front seat belt lower anchor (C). Unlock the lower anchor by pushing in on the screwdriver.
Remove the screwdriver, and then detach the front seat belt anchor plate (D) and anchor
cover from the lower anchor.4. Slide the seat all the way forward, then remove the seat track end covers from the back of both seat tracks.5. Slide the seat about half way to the rear so you can access the seat mounting bolts. If equipped with the driver's 8-way power seat, fully raise the seat.
6. If equipped with a side airbag, disconnect the negative cable from the battery, and wait at
least 3 minutes before removing the seat. 7. Remove the bolts securing the front seat. 8. Lift up the front seat, then detach the harness clip and disconnect the connector.
If equipped, the seat heater connector on the 2-way power seat and passenger's
manual seat. '04-07 models, disconnect the seat position sensor subharness connector on the
driver's manual height adjustable seat and the driver's 8-way power seat.
9. With the help of an assistant, carefully remove the front seat through the front door opening. 10. Install the seat in the reverse order of removal, and note these items:
Apply medium strength type liquid thread lock to the front seat mounting bolts
before reinstallation.
Make sure each connector is plugged in properly.
Tighten the seat mounting bolts to the specified torque in the sequence shown.
Slide the seat all the way back and tighten then slide it forward and
tighten Before attaching the lower anchor bolts, make sure there are no twists or kinks in
the seat belts. 04-07 models passenger's seat: The triangle marks on the anchor plate and
the lower anchor must face the same side. Insert the anchor plate into the lower
anchor, and make sure that it is locked securely. If equipped with a side airbag, reconnect the negative cable to the battery. Enter the anti-theft codes for the radio and navigation system, then enter the radio station presets. Reset the clock. Your all done. Drink a cold beverage and enjoy the rest of your weekend! hope this helps. Dave

Jun 16, 2011 | 1997 Honda Accord

1 Answer

1999 Ford Explorer Sport. Cracked Lower Seat Frame front of left side hinge attatchment/recliner handle. Lower seat frame needs to be replaced or welded. I am working out of town and can't get to a shop...


I have seen both wood and bricks used to put under a seat frame. Some of the seat mounts do not give you much room for using a wrench. They give you room for a 3/8th air rachet and socket. Especially if you are a little shorter you can elevate the frame and then put wood in the cavity and then lower the seat for a temporary fix.

There are some operating parts I have no name for, but they connect the gears on each side of the seat track. So the wood blocks have to fit between these parts. I can recommend a Salvage yard called "Parts Galore" which is expanding Nationwide. Again wrenching on this stuff is hard without power tools.

Can't address swapping passenger and driver tracks. Check out small "C" clamps or conduit clamp.

Jul 24, 2017 | Ford Explorer Sport Cars & Trucks

1 Answer

My passenger front seat will not budge.ive tried everything!i have a 2001 pontiac grand am.please tell me what size the bolts are that hold the seat in.


You may have to remove the four nuts holding the seat down, remove the seat, and look for change, or debreas stuck in the track. Check the bearings, lubercate the track lightly. If the bearings are shot, or the frame/track is bent, you can try to pry it back, but it may be easier to purchase a new seat.

May 01, 2010 | 2001 Pontiac Grand Am SE

1 Answer

Remove front seat


SECTION 501-10: Seating 1998 Escort/Tracer Workshop Manual REMOVAL AND INSTALLATION Seat —Front Removal
NOTE: Driver side seat shown, passenger side seat similar.
  1. Slide the seat to its rearward position.
  1. Remove the front seat track to floor front bolts.
  1. Slide the seat to the forward position.
  1. Remove the front seat track to floor rear bolts.
  1. Disconnect the safety belt warning indicator switch electrical connector.
  1. Remove the front seat.

Dec 06, 2009 | 1998 Ford Escort

1 Answer

I NEEDED THE 2001DODEGE CARAVAN SPECIFICATION


Hi,

2001 Dodge Caravan Performance Features -3,301 cc 3.3 liters 6 V engine with 93 mm bore, 81 mm stroke, 9.3 compression ratio, overhead valve and two valves per cylinder
-Unleaded fuel
-Fuel economy EPA highway (l/100km): 9.8
-Multi-point injection fuel system
-Main 76 liter unleaded fuel tank
-Power: SAE and 134 kW , 180 HP @ 5,000 rpm; 210 ft lb , 285 Nm @ 4,000 rpm
2001 Dodge Caravan Handling & Driving Features -ABS
-Two disc brakes including two ventilated discs
-Spacesaver steel rim under body spare wheel
-Strut front suspension with stabilizer bar independent with coil springs , beam rear suspension with stabilizer bar rigid with leaf springs
2001 Dodge Caravan Exterior Features -Body side molding
-Front and rear body color bumpers
-Driver and passenger power heated black door mirrors
-External dimensions: overall length (mm): 4,803, overall width (mm): 1,996, overall height (mm): 1,750, wheelbase (mm): 2,878, front track (mm): 1,600, rear track (mm): 1,626 and curb to curb turning circle (mm): 11,460
-Complex surface lens halogen bulb headlights
-Double sliding minivan side door
-Remote control operation opening rear ¼ windows
-Metallic paint , gloss paint , pearl paint
-Fixed rear window
-Tinted glass on cabin, rear and side
-Weights: curb weight (kg) 1,842, gross trailer weight braked (kg) 907 and max legal load (kg) 772
-Windshield wipers with variable intermittent wipe
2001 Dodge Caravan Interior Features -Air conditioning with rear outlet
-Fixed mast antenna
-Manufacturer's own audio system
-Automatic drive indicator on dashboard
-Below seat storage under passenger seat
-Cargo capacity: all seats in place (liters): 433, all seats removed (liters): 4,154 and third row seats removed (liters): 1,291
-Clock
-Dashboard full console with open storage box
-Delayed/fade courtesy lights
-Cruise control
-Front seats, rear seats and 3rd row seats cup holders
-Door ajar warning
-Door pockets/bins for driver seat and passenger seat
-Floor covering: carpet in load area
-Driver and passenger front airbag
-Bucket seat
-3-point reel height adjustable front seat belts on driver seat and passenger seat
-Front seat center armrest
-Glove compartment
-Height adjustable two head restraints on front seats, rear seats and 3rd row seats
-Internal dimensions: front headroom (mm): 1,011, rear headroom (mm): 998, front hip room (mm): 1,440, rear hip room (mm): 1,722, front leg room (mm): 1,031, rear leg room (mm): 930, front shoulder room (mm): 1,588 and rear shoulder room (mm): 1,643
-Low fuel level warning
-Low washer fluid level warning
-Internal button power locks
-Power steering
-Front power windows with one one-touch
-Front reading lights
-3-point reel height adjustable rear seat belts on driver side and passenger side
-Bench one-piece two rear seats
-Rear view mirror
-Upgraded cloth/velour seat upholstery
-Seating: seven seats
-Six speakers
-Plastic steering wheel
-Tachometer
-3-point reel third row seat belts on driver side , 3-point reel third row seat belts on passenger side , lap static third row seat belts on center side
-Front facing bench removable one-piece third row seats with capacity three
-Driver and passenger vanity mirror
-Ventilation system with recirculation setting
Thanks.

Jun 18, 2009 | 2001 Dodge Caravan

Not finding what you are looking for?
2009 Ford Flex Logo

635 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...