- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Search online for HHO (a do it yourself hydrogen burning accessory for vehicles) On some websites they claim that most of these HHO don't save fuel because of the computer overriding it. They sell tuners of some sort where you can fool the computer that all is working fine but tweak whatever you want to.
The system can be operated manually by removing round cover cap on the B pillar (Just behind door). manually turn crank knob on top of motor.
There is a limit switch on the A pillar to turn off the motor for forward movement. There is a limit switch on the B pillar to shut off the motor for rearward movement.
You may need a B pillar limit switch if the belt is going all the way back but not shutting off. Unfortunately the rear limit switch is serviced with the track & motor assembly. Get a used one at car-part.com. Page with * is cheapest part.
You need to remove A pillar trim, B pillar lower trim, B pillar upper trim, and front door opening upper trim.
disconnect front limit switch
disconnect rear limit switch
disconnect motor electrical connector
remove 3 motor bolts
remove 2 limit switch bracket bolts
remove screw at A pillar near limit switch
remove 3 screws at track assy to roof.
pull back carpet & remove 4 screws at floor where you step into car.
remove track & motor assy.
I also have a G35 05. This is not an error. The REV light is within a circle, this is a gauge. This gauge also has an amber light in it which blinks or stays on solid based on settings you control. This can be controled with your trip selector button. This button has multiple functions, as you press it, your trip A counter will show, then your trip B counter, then your REV light indicatior setting. this is where you set the RPM limit. If you wish to change the RPM limit to a higher or lower setting, press and hold the trip selector button until the display starts blinking. Then press multible times until you get to the RPM's your looking for. Now when you approch the RPM's selected, the light will start blinking and once your reach them, the light will stay on solid.