Question about 2008 Toyota Sienna

1 Answer

How to do front brake on 2008 toyota sienna

How to do front brakes on a 2008 toyota sienna, any special tools?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

No special tools at all. Are you familiar with doing brakes? I wouldnt recommend it for a first timer, its not worth the lives of you and others. Ive also seen people take the wrong bolt out of calipers and spend triple what a brake job cost because they werent experienced and wanted to save a buck. A 17mm and pad spreader or big channel locks is all you need. Use Toyota pads and have the rotors cut..OR... Dont complain when they make noise all the darn time!

Posted on Jan 25, 2009

1 Suggested Answer

pcastal
  • 90 Answers

SOURCE: front brakes 2008 toyota sienna

No special tools needed, just a 17mm, 21mm. I do not recommend people without training do their own brakes, it is too dangerous to risk peoples lives just to save a few bucks. Also, any pads other than Toyota's will make noise and squeal, so if noise will bother you, use Toyota pads and resurface the rotors.

Posted on Feb 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake esemble diagram


Hey Stan the man,need your vehicles info.,year,make,model and engine size and Tommy on the spot here will send you a picture diagram of your rear brake assembly.There's a special spring tool you can get at auto parts store to remove and install springs,me got one.

Oct 15, 2012 | Cars & Trucks

1 Answer

Both my tail lights are not working on my 2008 toyota Sienna. Brake lights work fine, just the running lights are out.


Your tail light/license plate light fuse is blown. Replace that fuse and you will have your running lights once again.

Jan 06, 2011 | 2008 Toyota Sienna

1 Answer

Replace oil filter for 2008 Toyota Sienna - Special Service Tool


Special Service Tool from Toyota is part number 09228-06501

May 11, 2010 | 2008 Toyota Sienna

2 Answers

Are there any special tools needed to change the brakes on a 2006 toyota sienna? Standard two bolts that hold it on?


You will probably not need anything other than a metric socket wrench set.

Many Toyota models have disc brake calipers that will flip up or down when you remove one of the two bolts that hold the calipers on. I am not sure of the setup on the Sienna.

When you remove either the upper or lower bolt and move the caliper, you can then remove the old pads. Also, you will need to push the piston(s) back into their cylinders to give you enough space to install the new pads. A large C clamp will usually suffice to push in the pistons.

I assume that you are talking about the front (disc) brakes. Some autos still have drum brakes on the rear, and those are a different story. They require several specialty tools to remove and replace the shoes.

Oct 11, 2009 | 2006 Toyota Sienna

1 Answer

Loud grinding noise; new brakes and new tires


some of the brake material used will make that sound on toyota's and lexus.you need to try a differant type of brake pad.should help.

Jun 12, 2009 | 2004 Toyota Sienna

1 Answer

Brakes are making loud grinding noise when slowing down to stop or on an incline


Ok, it could be a few things, 1. bad break caliper. 2. if you have ceramic breaks, it could be a cracked brake pad, and if they are not ceramic they can still be cracked. 3. if you drive a lot then it could be that you need new breaks again.. 4. also have your back breaks checked along with the front ones..

May 22, 2009 | 2004 Toyota Sienna

1 Answer

When braking, green turn signal lights up and right rear brake light does not come on. (have replaced brake light)


Do you have a trailer harness? If so, your harness has a short in it.
Remove it and throw it away; cheaper to replace it than to repair it.

If not, you have a short in the socket at the brake lamp

May 04, 2009 | 2008 Toyota Sienna

1 Answer

Front brakes 2008 toyota sienna


No special tools needed, just a 17mm, 21mm. I do not recommend people without training do their own brakes, it is too dangerous to risk peoples lives just to save a few bucks. Also, any pads other than Toyota's will make noise and squeal, so if noise will bother you, use Toyota pads and resurface the rotors.

Jan 09, 2009 | 2008 Toyota Sienna

1 Answer

08 toyota sienna van and oil filter change


a local auto parts store will have every thing you need including manuals

Dec 30, 2008 | 2008 Toyota Sienna

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...