Question about 1987 Ford Tempo

1 Answer

I have a 95 Maxima I changed the fuel injectors and now the car wont start.  so i put the old injectors back and it still wont turn over,  It stay on for about 2 sec can anyone help me

Posted by on

  • 3 more comments 
  • aubrey_harri Jan 09, 2009

    i dont think so i just popped them out and put new one in

  • aubrey_harri Jan 09, 2009

    how do you do that

  • Thomas F. Schneider May 11, 2010

    Acually You bleed the line while installing the injectors. Technically you are not bleedingn the injector itself. Maybe now days one does not have to bleed injectors. I lokked it up and got conflecting 
    answers, It  has been some time since I have change any.


     Anyone else?

  • Thomas F. Schneider May 11, 2010

    I always had too. 

  • Thomas F. Schneider May 11, 2010

    Did you bleed the air out of the injectors when installing them:? 

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

I assume you bled off fuel pressure before you installed the injectors. Try this to pressurize the fuel system. Turn the key to "on" position and wait 5 seconds. AT same time, listen carefully for a buzz sound that means the fuel pump is running to pressurize the system. It will shut off after 5 seconds. Then, turn off the key and wait 30 seconds for the computer power relay to shut off. Then, turn the key to "on" again. Thsi will run the fuel pump for another 5 seconds. Repeat 5 times. Fuel system should be pressurized now.
If it doesn't start now, you may have done something while you were changing the injector. good luck

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 maxima will not crank


when you said you changed the motor ?????????
diesel has probably got into injection system .or fuel system . flush everything . is it injection . injector could be fouled . what fuel system does it have .

Nov 05, 2013 | 2004 Nissan Maxima

1 Answer

Car will turn over and start but wont stay running


change your fuel filter and have your injectors cleaned

Jan 10, 2011 | 2001 Nissan Maxima

2 Answers

I hav a 95 maxima and my bro drove it till it ran out of gas.Ever since then the engine light has come on and it takes alot for it to turn over when starting. Sometimes the battery dies before itll start.I...


Replace your fuel pump. When you run a vehicle completely out of fuel, you will pull all the sediment off the bottom of the tank, and this will indeed clog fuel injectors, but first it will clog your fuel filter. After replacing your fuel filter, purchase a high-octane fuel injector cleaner, and add it to your fuel tank as specified on the side of the fuel injector cleaner bottle specifies.

Nov 15, 2010 | 1995 Nissan Maxima

1 Answer

My 95 tahoe starts but dont stay on. Fuel wont stay pumping from tbi. Just swapped a motor from 80's camaro. Was running real good in box chevy perfect. Now fuel wont stay flowing out of injectors. Already...


did you install the oil pressure switch origional to the tahoe? The tahoe uses a low oil pressure shutdown, instead of an inertia switch to shut off the fuel pump in the event of an accident. If the pressure circuit does not close within 3 seconds after the engine starts the fuel pump shuts off. This is in case the truck is on its side or upside down the pump will shut off.

Aug 19, 2010 | 1995 Chevrolet Tahoe

1 Answer

95 Nissan Maxima with fuel injection issue.


Could be battery, starter or coolant sensor.

It is hard to understand / get across engine noises with words so difficult to diagnose over the net but try to push start the car and let me know if it starts ok with a push. Also, maybe try a jump start, preferably using a circuit protector if you have one.
Let me know results of the above.

Lloyd

Dec 05, 2009 | 1995 Nissan Maxima

1 Answer

95 nissan maxima wont start


I had a 94 which i fixed this same type of problem by putting in a new distributor

Aug 26, 2009 | 1995 Nissan Maxima

2 Answers

Changed the fuel injector on 95 Cavalier 2.2 moter. Car acts like it wants to start, but doesn't.


did you check you fuel filter and your fuel pump? i had the same problem and once i replaced the fuel filter its been fine since

Apr 18, 2009 | 1997 Chevrolet Cavalier

1 Answer

Nissan maxiam can,t start after change fuel injector


make sure you plugged everything back in and no vacuum leaks.

Nov 15, 2008 | 1993 Nissan Maxima

3 Answers

1995 nissan maxima bogging


so you hear any different sound from the exhaust?
sounds like a plugged cat.
paul

Sep 24, 2008 | 1995 Nissan Maxima

2 Answers

1988 Nissan Maxima/ Fuel Delivery


It might be the mass air flow sensor

Jul 02, 2008 | 1987 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...