Question about 1992 Toyota 4Runner

1 Answer

92 yota 4runner fuel filter replacment

I have the 3.0 v6 is ther a trick to changing the fuel filter cant seem to get the front line loose from filter not enough room to get a wrench on it at all please help??????????

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The fuel filter is under pressure so be sure to remove the gas cap before attempting to remove the filter. If not you will strip out the nuts. Run your vehicle until the reserve fuel light has been on for 20 or so miles. This way you can let the remaining fuel (1-2 gallons) run into a gas can and you can reuse it. Unscrew the nuts from the gas tank side and the engine side, then install the new filter. The fuel filter is located on the passenger side, almost directly under the front seat, but on the undercarriage. Hope this helps.

Posted on Jan 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'92 4runner dies when I put it in gear


Check to see if any vacuum hose fell off off, or electrical connection disconnected while changing the starter

May 11, 2014 | 1992 Toyota 4Runner

2 Answers

Cant find fuel filter


The fuel filter is under the car near the fuel tank (see diagram below). It's a canister with a fuel line threaded into both ends of it. You will need a 20 mm wrench to hold the filter and a 16mm line wrench to loosen the line fittings. You may also be having an ignition problem. All ignition components are under the aluminum top engine cover.


7_11_2012_9_40_25_pm.gif

Jul 11, 2012 | 2002 Pontiac Grand Am

1 Answer

I have to replace the fuel filter on my 2002 chevy impala and saw a few different ways of replacing it. I was wondering what one was the correct way to do so. The one that I actually understand is to just...


I don't know if you have to start at a certain end. I usually loosen both line nuts then remove the rear one. Then I hold the front line nut with a wrench and unscrew the filter from the nut. Depressurizing the system can be done by depressing the valve inside the fuel pressure test port located on the fuel rail. Place a shop rag over the valve and carefully depress the needle valve inside the valve stem with a small screwdriver. do this a few times until no fuel comes out. Always wear safety glasses when performing this procedure. Always use line wrenches on the filter nuts.

May 13, 2011 | Chevrolet Impala Cars & Trucks

2 Answers

My husband is changing the oil on our 300 and he cant get the oil filter off. Any tricks to this?


Does he have an oil filter wrench? if not get one, about $5 from any auto parts store. On the really stubborn ones I drive a large screwdriver blade or round pry bar through the filter casing and get it loose that way, jumbo vise grip channel lock pliers also do the trick

Mar 21, 2011 | 2006 Chrysler 300

1 Answer

92 4Runner 3.0 V6, cranks and runs for 1/2 a second only. Engine has spark, compression, and fuel(45 psi). No injector pulse. It will only stay running if you spray ether or gas into the intake.


have you replaced the fuel filter? Where did you test the fuel pressure at (was it after the filter or before?)
Also - I'm just curious -- how old is the fuel?

Feb 13, 2011 | 1992 Toyota 4Runner

1 Answer

I cant find my fuel filter on my 1985 toyota 4runner i looked along the frame rails from the tank to the motor 22re all i could find was a canister 3 times the size of my fuel filter they gave me it had...


The filter is well hidden from casual view. It is bolted to the passenger side of the engine block. It is above the starter and under the intake manifold. The filter is very hard to change. Depending on your skills as a contortionist and tools on hand, you may have to remove the both the oil filter and starter to get to it.

Jan 03, 2011 | 1985 Toyota 4Runner

1 Answer

I am changing the Fuel Filter In my 1991 SAAB 900 Turbo I bought it from someone who had it sitting in their yard for 3 years and though It would be good preventive maintenance to flush coolant, change oil...


LOOK UNDER CAR FUEL FILTER LOCATED FORWARD OF FUEL TANK. RELIEF FUEL PRESSURE BY DISCONNECTING THE ELECTRICAL CONNECTOR AT THE FUEL PUMP OR REMOVE FUSE.CRANK CAR UNTIL DIES FROM LACK OF FUEL. THEN REMOVE FUEL FILTER USE IN LINE WRENCH AND OPEN WRENCH.THIS KEEP YOU FROM DAMAGING FUEL LINES.WHEN INSTALLING FUEL FILTER THE ARROWS SHOULD BE POINTING IN DIRECTION OF FLOW.

Jul 18, 2010 | 1991 Saab 900

3 Answers

Locate the fuel filter


in my 92 yota pick up the fuel filter is on the right side of the motor towards the bottom..(thats if your at the front of the vehicle).. for me my truck is lifted so i had to change everything from beneath the truck!

Jul 16, 2010 | 1992 Toyota Pickup

1 Answer

91 4runner not running on 1,3,&#4


Seems like you replaced everything on the ignition but the cap. Sounds like a good place to look to me.
Look for burn marks around contacts.

May 30, 2010 | 1991 Toyota 4Runner

Not finding what you are looking for?
1992 Toyota 4Runner Logo

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...